Arrives before Christmas 
We highly recommend this fuse bypass switch if you need to deactivate a fuse when you flat tow. It's a huge pain to pull the fuse by hand every time, and you risk losing or damaging it. With this kit, you just have to flip a switch.
Features:
Specs:
Note: Consult your owner's manual to determine which fuse to pull.
Technically, it is optional, but if you need to pull a fuse on your vehicle when you flat tow, this kit will make your life so much easier. Instead of wedging yourself down on the floorboard and fishing a tiny fuse out from under your dashboard every time you flat tow (not to mention putting it back again), you can just flip a switch. No dead battery, no lost fuse, no damaged fuse, no back pain.
When the switch is in the drive position, the fuse will be active and your car will function normally. When you're ready to flat tow, you'll flip the switch to the tow setting and deactivate the fuse. This allows you to tow your vehicle without the battery draining.
Installing this fuse bypass switch really only takes a few steps:
1. Open the fuse access panel and remove the designated fuse
2. Connect the end of the wiring harness to the fuse socket
3. Mount the switch in your dashboard
4. Insert the pulled fuse into the fuse holder
See the installation instructions for more details!
Average Customer Rating: 4.7 out of 5 stars (336 Customer Reviews)
We highly recommend this fuse bypass switch if you need to deactivate a fuse when you flat tow. It's a huge pain to pull the fuse by hand every time, and you risk losing or damaging it. With this kit, you just have to flip a switch.Makes towing easier.
trailer is the best
The item was correct and delivered promptly. My only complaint, not the fault of e-Trailer, is it was defective. A spade connector in one of the two fuse holders was out place in the socket. (Buried too deep on the molded rubber) Did not realize it until after it was installed and did not want to tear it out. Will replace fuse holder in lieu of the hassle of sending it back for a replacement.
very happy with part #rm6514 works great. i'am very happy with etrailer overs the years for service and prices on parts. thanks phil harnden
This switch was perfect solution for the problem of having to tear apart my floor in a 2014 Chevy Traverse everytime I would have to pull the battery fuse. Easy to mount and part was good quality.
Package was delivered quickly. Very good customer service from e-trailer.
I have purchased multiple things for towing. These are good folks.
Kit worked as designed. Easy to install. Only issue was the labels for Drive and Tow do not stick very well.
Easy install. Works as indicated. Shipped quick.
It was delivered today and I installed it today wasn't to hard.
Great product.
Product was easy to install and works as advertised.
Ordered on Friday and Received on Monday
Roadsters product worked well. I did not remove the lower dash part, and just did extreme yoga to remove and install the fuse bypass. This was the worst part. I can't believe that Honda put this fuse block in such a difficult to access location. The rest was simple. Installing the small connectors was a trick, (I also didn't use the fuse connector) but I finally got the connections in the fuse block. Drilled the hole from the outside and installed the switch. The location could have been lower and more to the left as there was a thicket portion of the dash on the back that prevented the lock nut from seating, but the switch is tight and works well. This is absolutely the way to go instead of pulling a fuse on my 2014 Honda CRV!
I ordered one of these and had it installed by one of the providers suggested by etrailer.com. It didn't work but I can't get a refund since too much time had passed between the time that I ordered and the time I had it installed. I could order a second one though and try to replace possibly defective parts in the first and could return the second for a refund. However, the second one doesn't work either. The tech talked with Roadmaster and they were stumped as to the issue too. Roadmaster is going to send yet a third bypass switch directly to shop to see if this one will work. Basically, I am out of a whole bunch of money and still do not have a fuse bypass. I should have just kept pulling the fuse manually as I had been doing!
Worked as described fairly easy to install. Received earlier than expected also.
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.