Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Tongue - Weld On - Up to 5,000 lbs

See what our Experts say about this Fulton Folding Trailer Tongue

• Folding Hinge for 2 x 2 Inch Trailer Tongue
  Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate plate cut to the appropriate size to shim out one side of the 2 x 2 trailer tongue so a hinge for a 2 x 3 hinge kit like the # FHDPW230300 weld-on or # FHDPB230101 bolt-on hinge can be used.
  view full answer...
• Are There Replacement Bushings for Fold-Away Coupler Hinge Kits
  I cannot speak for all fold-away coupler hinge kits but the ones we offer, the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101, part # FHDPB330301, and part # FHDPB350101 do not contain any bushings. It can be rather difficult to just look at a bolt or hinge pin and determine whether or not it has stretched or deformed but I would be willing to bet that is the issue you are having. The loose connection between these bolts and pins is a rather serious safety issue so I highly recommend...
  view full answer...
• Replacement Hub and Coupler Hinge Kit Pin for 2015 Ranger Z117 Ranger Trail Trailer
  To find the right replacement hubs you will need to identify your axle or know your bearing combination. The # AKIHUB-545-35-G-K and # 8-247-50UC3-EZ would both work if you have a standard 3,500 lb axle and want a 5 on 4-1/2 bolt pattern. These use # L68149 inner and # L44649 outer bearings. You can check your axle tag or pull your hubs and look for bearing part numbers/measure the bearing inner diameter. The swing hitch pin is not something that we carry. I would try a local repair shop...
  view full answer...
• Should the Fulton Weld On Hinge Kit Be Welded All the Way Around the Tube
  The hinge kit part # FHDPB230101 is a bolt on kit that comes with the hardware needed to bolt it to your trailer. For a similar hinge kit that would weld on you would want the # FHDPW230300. I would recommend you weld it all the way around like the picture I attached that came in from a customer who installed this kit.
  view full answer...
  
• Can Fulton Fold-Away Coupler Hinge Kit Be Used on Malone EcoLight Sport Trailer
  Yes, you can use the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101 on a Malone EcoLight Sport Trailer part # MAL53FR. I did an install video on this kit if you'd like to take a look below, it should be much easier for you as you don't have brakes. It does require drilling, there's one that you can weld (part # FHDPW230300) but being galvanized I don't recommend this.
  view full answer...
• Safety Chain Placement on Trailer Using Fulton Fold-Away Coupler Hinge Kit Part #FHDPW230300
  Fulton has offered this size for a while now. I checked their site, and it is listed. I did notice that the weld-on hinge kit is listed further down toward the bottom of the page, perhaps you did not scroll down far enough? The safety chains need to mounted rearward (aft) of the hinged portion of the trailer tongue. In the very unlikely event that the hinge should fail, the trailer will still be secured to the tow vehicle. The fold-away hinge is indeed rated for 5000 lbs, and should be...
  view full answer...
• Can the Fulton Fold-Away Coupler Hinge Kits Be Used To Flip Up the Tongue
  I do have an option for you but you cannot use a fold-away kit and install it so that the tongue flips up. The reason for this is that the downward pressure the trailer has would be too much force for a fold-away kit to handle while installed in the above manor. The only option you have if you need to reduce the overall length of the trailer is to use a fold-away kit and swing the tongue to the side. The Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101 or part # FHDPW230300 is the...
  view full answer...
• What Size Trailer Tongue Will Fit Fulton Fold-Away Coupler Hinge Kit FHDPW230300
  The 2 x 3 inch measurement means 2 inches wide by 3 inches tall. That is the dimension of the trailer tongue that is compatible with Fulton hinge kit # FHDPW230300. The openings on the hinge are slightly larger to fit over a 2 inch wide and 3 inch tall tongue.
  view full answer...
• Why Is Trailer Wall Thickness limited When Installing Fulton Fold-Away Coupler Hinge Kit FHDPB230101
  The reason the wall thickness is listed for the Fulton Fold-Away Coupler Hinge Kit, part # FHDPB230101, is because the Torx bolts included in the kit are a certain length and the nuts may not catch the threads when installing the hitch due to the 1/4 inch thickness of your trailer walls. I called my contact at Fulton and you can replace the fasteners with a greade 5 fastener if you choose. But you may want to wait and see if that is needed before buying replacement hardware. I do have another...
  view full answer...
• What Type of Welding Should be Used for the Fold-Away Coupler Hinge Kit # FHDPW230300
  I spoke with my contact at Fulton about what kind of welding to use for the Fold-Away Coupler Hinge Kit # FHDPW230300 and they said that it is 90-60 Cast Steel which should help you determine the appropriate welding. We do recommend that a professional do the welding.
  view full answer...
• Recommended Fold-Away Coupler Hinge Kit for a 2 Inch Trailer Coupler
  I have solution for you but we do not have any folding coupler hinges for a 2" x 2" coupler. You can weld 1/2" plates to the top and bottom of the coupler and use either the Bolt On Fold-Away Coupler Hinge Kit item # FHDPB230101 or Weld On item # FHDPW230300. Both of this kits are rated for up to a 5,000 lbs trailer. I have linked an installation video below.
  view full answer...
• Dimensions of Fulton Fold-Away Coupler Hinge Rubber Plug Kit
  We were able to find out the dimensions for you of the Fulton Fold-Away Coupler Hinge Rubber Plug Kit # F500705. Using digital calipers it measured 0.423 inches tall and its round base has a diameter that measured 0.426". These are designed to replace the rubber dampener plugs for the Fulton Fold-Away couplers: - Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs # FHDPB230101 - Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Tongue - Weld On - Up...
  view full answer...
• Fulton Weld On or Bolt On Hinge Kit for Boat Trailer Tongue
  Welding is considered a more permanent solution than bolting. All things being equal one is not stronger than the other, but with welding you'd never have to worry about bolts backing themselves out. As long as you have access to a welder or (person or machine) I'd recommend the weld on Fulton hinge part # FHDPW230300.
  view full answer...
• Looking For Fold Away Coupler Kit For 3-1/2"x3-3/4" Tongue
  Hello Brian. I do appreciate you reaching out, but unfortunately, we do not carry a fold away coupler kit that will fit a 3-1/2"x3-3/4" tongue. At this time, we offer fold away coupler kits for a 2"x3" tongue # FHDPB230101 or a 3"x5" tongue # FHDPB350101.
  view full answer...
• What Kind of Welding Is Required to Install Fold-Away Coupler Hinge Kit FHDPW230300
  Wire feed welding would be the best welding method to secure the # FHDPW230300 hinge kit to your existing trailer tongue. To install the hinge, you would simply cut the tongue at the point at which you want it to pivot, and then slide the two sides of the hinges over the newly cut ends. They will slide on about 3 inches on each side. To determine the maximum pivot length for your particular trailer, I recommend taking a look at the chart on the product page for hinge kit # FHDPW330300. The...
  view full answer...
• Recommended Solution to Extend Boat Trailer Tongue
  I may have a solution for you, but there isn't really a direct way to extend the tongue of your trailer 2 feet. However, you could potentially use the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Tongue - Weld On - Up to 5,000 lb # FHDPW230300 and then swap the coupler to a different length of trailer frame that is the length that you need it to be. This would really be the only way to accomplish what you're wanting to do, but it will work. You'll want to make sure that the steel tongue...
  view full answer...
• Fulton Trailer Frame Hinge Kit Recommendation for a 2 by 2 inch Trailer Frame
  To use the Fulton Fold-Away Coupler Hinge Kit # FHDPW230300 on a trailer frame that is 2 by 2 inch will require a 1 inch spacer get welded to the trailer frame by a qualified fabricator to take up the 1 inch of space since this is designed for a 2 by 3 trailer frame.
  view full answer...
• Can Fulton Fold-Away Coupler Hinge be Welded To Aluminum Trailer Tongue
  Both the # FHDPW230300 (for 2"x3" tongue) and # FHDPW330300 (3" x 3") are not for use on aluminum trailer frames. Aluminum trailers do not have the strength for a hinge kit which is why Fulton recommends against it. My recommendation is to check with your trailer manufacturer to see if they say a coupler hinge can be used. More than likely the answer is no, but it doesn't hurt to check. Also, aluminum and steel do not weld together easily. It takes a special process, so you would need...
  view full answer...
• Is There A Way To Extend The Tongue Of A Trailer?
  While we don't have a trailer tongue extender that folds in like the one you are referring to, there are a couple options that may suit your needs. You could potentially use a fold-away coupler adapter such as Fulton Fold-Away Coupler Hinge Kit # FHDPW230300. This is designed to be added in between the trailer frame and the coupler so that the tongue can fold in for easy storage. You could technically install this, then use a longer coupler to extend the tongue. Keep in mind, trailer manufacturers...
  view full answer...
• Recommended Weld On Hinged Coupler for 2" x 3" Trailer Tongue
  I have a solution for you, but you can't weld on the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs # FHDPB230101 because of the zinc top coating that's going to generate some poisonous gases when it's welded. Instead, there is a weld on version available that has the same specs with the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Tongue - Weld On - Up to 5,000 lbs # FHDPW230300, which is what I would recommend. There isn't any difference...
  view full answer...
• Availability Of Swing Away Hinge For A Boat Trailer
  It sounds like you are looking for a swing away hinge kit for your trailer tongue. We do have swing away kits available, and fitment will depend on the size of your trailer tongue. We have the following options: 2" x 3" Tongue # FHDPW230300 3" x 3" Tongue # FHDPB330301 3" x 4" Tongue # FHDPB340301
  view full answer...
• Installation Instructions for the Fulton Fold-Away Coupler # FHDPB230101
  The Fulton Fold-Away Hinge Kit, item # FHDPB230101, is designed for bolt-on installation. If you need a weld on kit, you would use the Fulton Fold-Away Coupler Hinge Kit, Weld On, item # FHDPW230300, for your application. To install either of these foldaway kits you will need to cut the trailer tongue at the desired pivot point, up to 36 inches see table below, and then attach the two sides of the fold away to the cut ends of the trailer tongue. Be careful not to damage any wiring or...
  view full answer...
• Why Can't Folding Trailer Tongue Hinge FHDPW230300 Be Used on Aluminum Trailers
  Aluminum, as a material for construction of a trailer, does offer some major advantages: it cannot rust and it is lightweight. Downsides of aluminum as a trailer material are reduced strength (as compared to steel) and sometimes electrical difficulties since it does not conduct as well as steel. Grounding lights on an aluminum trailer can sometimes cause challenges and may require a ground jumper wire to be run up to the main trailer ground. For a weld-on hinged coupler like # FHDPW230300...
  view full answer...
• Availability of Coupler Hinge Kit for Trailer Coupler with 2 inch by 3 inch
  Yes we do have hinge kits that fit 2 inch by 3 inch inch trailer couplers with the part # FHDPB230101 for a bolt on setup or the part # FHDPW230300 for a weld on setup.
  view full answer...

Do you have a question about this Folding Trailer Tongue?