Measure and record how much hydraulic fluid or other liquid you're using in your shop with the digital meter on this pump. Just attach the pump to a 5-gallon bucket, plug it into your outlet, flip the switch, and squeeze the handle to operate.
Features:
Specs:
This pump is specifically designed to attach to 5-gallon buckets. If you work on cars in your shop or in your garage at home, you likely have 5-gallon buckets of engine oil and hydraulic fluid. Why waste your time lifting that heavy bucket or transferring the fluid to a smaller container? Save yourself a bucket-load of time by extracting the hydraulic fluid right from the container it comes in by popping the top off your bucket and replacing it with this easy-to-use pump.
Know exactly how much liquid is being pumped into your vehicle and the rate at which it is transferring with this digital flow meter. This meter is great for shops, farms, or anyone who needs to keep a record of how much fuel they use. The digital display provides a precise measurement within 1%. With the push of a button, you can easily change the measurement units to quarts, pint, liters, or gallons to fit your needs.
This pump is as simple to use as a commerical gas pump. To start siphoning, just flip the switch on the powered pump head. Squeeze the handle harder to increase the rate of flow as you pump, and back off to slow it down. A simple twist of the handle locks it into place and allows for continuous flow of liquid without the need to squeeze. When you are done pumping, simply release the handle and turn off the device.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Tera Pump electric fuel transfer pump with the flow meter for a five gallon bucket. Now this electric pump will attach to your five gallon bucket so that you can transfer oil or fuel to your moor, your boat, or even your ATV. Now the five gallon bucket is not included. You would have to supply that.
This pump is perfect for garages, shops, yards, farms, docks, and campsites. And it is compatible with liquids such as engine oil, hydraulic oil, gasoline, diesel, kerosene, anti-freeze, ag chemicals, and even non-potable water. It includes everything laid out here on the table. It includes this electric pump that has the adjustable intake tube. You can see it adjusts out.
Comes with this AC adapter, supply to power. It's an ACDC adapter actually, comes with the discharge hose and this discharge hose has the flow meter on it and the control nozzle. And it comes with the bucket lead bucket lid right here that'll attach it to your five gallon bucket. Now, for this video demonstration I am, I did happen to pull an empty five gallon bucket, just to show you how it attaches, but what you'll do is make sure there's no lid on this and then you'll take your lid here, put it down, make sure it seats on there. And then you have these three wing nuts.
You just tighten them down so it secures it to the five gallon bucket. And when you do tighten this you wanna make sure it's got a nice tight seal on it. I'm not gonna tighten it real tight I'm just gonna snug it up to give us an idea here. But once you got your lid on there you can see now it's secured to the five gallon bucket. And then your electric pump right here, we mentioned it has the telescoping intake too, and that's to allow you adjust to fit your bucket.
So depending on the size of the bucket you're using, you can adjust those two in or out, depending what you need. The length you can do if it's completely closed, so the minimum, it's gonna be about 16 and 1/2". Extended all the way out, it's gonna get you about 22 and 1/2" in length. Diameter on this tube is about 1 and 3/8". If you notice in the very end right here you'll see this silver part. This is a stainless steel end cap filter that'll help keep debris out of the motor, prevent any damage. And the flow rate on this pump is up to four and a half gallons per minute. And you just attach this, there's threads here, threads on the lid, and you'll just screw this in to snug it up. And once you get it snugged up, you're all ready to go. The ACDC adapter right here has a plug on this end. We just swing this around. You'll see the plug right up at the top here and you'll just plug that in, just like that. And on the other end you have your standard plug, you plug it into a standard 110 volt AC wall socket. That'll supply you with the power that you need. Now the rubber discharge hose right back here, this hose will consist of four layers and it is oil, flame, and cold resistant. It is a high grade polyester construction which is flexible. Total length on is about 73 and 1/2" long. The diameter in the hose is 3/4". Now this one, if you notice, has a flow meter attached to it. This'll measure the amount of transfer of your liquid in gallons, liters, pints, or quarts within plus or minus 0.5%. I wanted to sort of zoom in to show you here, we can zoom in and there's the flow meter. And you'll see if I push on the buttons there you can see how it reads it. So every time you take your nozzle here and squeeze it, it'll be showing you the flow rate on that flow meter. Nice extra feature to have. So when you go to attach this hose, what you'll do, you can swing this around, take off your rubber cap, take your threaded portion there, and then just thread it all the way in to make your connection. And again, you snug it all the way down and once you get it all snug, you're all ready to go. And what's nice, if you notice this will swivel. And then also the actual nozzle itself will swivel 360 degrees. So that prevents the hose from getting any tangled up. And if you also notice right up here, it has a little holster thing that you can just hook that to. And once you hook that in place it'll keep the nozzle safe, in a nice safe place. If you notice on the pump itself, here's your power switch has an LED light right above it. So when you turn it on that light will come on and let you know it's on. When you flip it down it'll go off to tell you that it's off. So basically when you operate this you flipped that power switch on, squeeze your nozzle, and that'll control the rate of flow. And again, you couldn't see the meter. It'll show you the flow. And then when you release the handle, just go ahead and turn your power switch off to stop the flow. Now this unit here comes with the discharge hose that has the flow meter. If you're not wanting to worry about having a flow meter if you just want a regular discharge hose they do have a kit where all the other parts are the same and they'll just include a standard discharge hose like this. This is the extra, or the part that would be different doesn't have the flow meter on it. So if you're not worried about having the flow meter you can get the other kit, which we sell separately on our website. It's part number TE67VR, and it's listed on this product page as a related product. But that should do it for the review on this Tera Pump electric fuel transfer pump with the flow meter for a five gallon bucket..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.