To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
Specs:
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer. Even a truck bed utility rack is available so that you can easily haul ladders and lumber with the load placed on the hitch (and therefore your truck's frame) instead of your bed rails.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (1673 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Great hitch, great directions for install. I haul hay in my truck so turnover ball is great. I would not hesitate to buy another and install it on any truck!
The customer service from eTrailer is top notch. I ordered my B&W 1067 the day before New Year's Eve. I had it within 5 days including the holiday and weekend. The B&W 1067 installed pretty easy. I did it myself in about 3 hours. I was lucky that my truck previously had a B&W 1067 installed so I didn't have to drill any holes. The only complaint that I have is I was short 2 bolts in the hardware bag. I didn't worry with calling eTrailer; I just went and bought new ones.
Maurice J - 01/06/2016I ordered this hitch a year ago, customer service called me to verify the model of my truck and installed my self on a 2007 GMC Sierra 2500hd classic the hitch by far has been the best hitch I’ve owned. I have a 32 foot gosseneck I pull and it’s easy to hook up and holds the weight. The springs on the safety chains still work like it’s new and the best part is if I just need the bed I can pull the pin and filp the ball and have the whole bed
A very nice well built hitch. My son and I installed this hitch in 3.5 hours. The instructions were a little vague, but the video that etrailer provided for a 2001 GMC Crew Cab with a short bed, was similar to my 2003, an was very helpful. We removed the rear wheels, and had to cutout a section of heat shield, and cut a v shape in the bed. We didn't have to touch the exhaust, like the video instructed. The braces were a little tight to get in place, but weren't that difficult. We used a tractor, and chain to hold tension on the hitch while we bolted it together. All said and done, I would say make it a 2 man job, and you will be pleased with the results....
A friend recommended adding this hitch when I purchased my 5th wheel RV. It is all he said and then some. Absolutely easy to install and I'm completely satisfied with how it handles my RV. Highly recommend this hitch to anyone considering it. Great product at a great price.
Great product. Wish the instructions had a few pictures. Other than that, anybody with any mechanical ability at all should have zero troubles installing this hitch.
Installation went alright it took me about 5 hours. The ubolt on the driver side was a pain to get it to thread on. Would of been helpful if the ubolt was an extra 1/4".
Bought one of these systems for another truck several months ago. Great product, and etrailer has been very good to deal with.
Great easy to install it took us about 2 hours to install. 05 GMC Sierra 2500
Everything delivered in perfect condition. Installing a little more time consuming than I anticipated but everything went together as described.
Works perfect. I like it a lot better than a 5th wheel plate or rails. Takes up no room in the bed at all. Very easy to change the ball and Very easy to install. I took the bed off because I’m fat and Also wanted extra room to tighten everything with an impact gun. Good price for the purpose it serves. Just wish adapters for 5th wheels were a little cheaper
Very happy with quality but hitch is harder to install than the curt gooseneck hitch for a cat eye Chevy . The instructions are lacking very important information about installation and bolt placement . I would still by another turn over ball .
Stellar! works like a charm and easy to install.
Dave B - 06/21/2021This product was well worth the money spent, very well built and was easy to install, it took my son and myself about 2 1/2 hours to do it. I will use this hitch to pull a 30 foot 5th wheel travel trailer. I am glad to get rid of the regular Reese 5th wheel hitch in the back of my pick up opened up the back so I can put things in there flat with out having the rails in the bed. I would like to thank Mariah and Stacey for all the help they gave me. There was a small shipping problem prior getting everything shipped, but when I called them and told them what was going on it was taken care of immediately, instead of a 5 to 7 day shipping it was here at my home in 3 days. I would recommend this hitch to anyone who wants to have a well constructed goose hitch under the bed of their pickup. Again I want to thank Mariah and Stacey for their help in doing what they did. Hope that their boss reads this. All I can say is OUTSTANDING LADIES, THANK YOU VERY MUCH.
The video showed a cross member with a huge cutout, mine didn't have it, so I'll probably have to reroute some hoses, but other than that, it's great. A little much for one guy alone, but doable.
installed as expected. This is my 2nd hitch of this brand and style I've bought off etrailer. As usual with everything else I've purchased, shipping was faster than expected and products as described.
It's the best hitch for its job....very easy to install...also the wiring harness...very easy
The hitch and controller was installed on a 2002 Chevy 2500HD. It took roughly 15 min to install the Tekonsha P3 Brake Controller, plug it in and program it. As far as the B&W Turnover Ball Hitch, I cut the hole in the bed and cut the heat shield out the day before while I was waiting for the hitch to arrive. The next day my parts arrived, I laid out all the parts to make sure everything was there and then started the install. I didn't want to cut the 1"x1/2" notch out of my fender well to get the angle iron in so I spent about 15 min. trying to get it up on top the frame from underneath the truck. A waste of time. Do like the instructions say, cut the notch and slide it straight across the top of the frame. It will save time and aggravation. After getting both braces in place I ran a piece of rope down thru the hole and pulled the hitch plate up into place and tied it off. I installed all the bolts finger tight, put the side plates on and tightened everything up. It looks nice and I saved myself a $435.00 installation fee. With out a lift and without taking my rear tires off it took about 3 1/2 hrs. to install by myself. The only thing I want to say to B&W is don't place the heavy metal hitch parts on the booklet with the packets of Lithium Grease in it, they bust as the picture shows. Last but not least, thank you Sherry for all your help with my order and getting it to me quick in such short notice. I really appreciated it.
From our perspective the B & W Turn Over Ball and mounting bracket is the "gold standard" for gooseneck towing. We routinely use our gooseneck trailers to tow near capacity loads of logs, machinery, and other materials. The B & W kit performs as well as the welded in place mounts we have used in the past!
Easy install! Works great and you can get a cleaner gooseneck hitch
Needed a B&W turnover hitch and paid the extra $11 to guarantee 4 day delivery. I received it the next day. Impressed!
Awesome service, fast shipping, great p roduct!
Had a buddy install it. Been great ever since. Love being able to turn it over when I’m not hauling. It stays clean an lubed up while it’s turned over. Will get another if and when I get another truck.
I'm very pleased with the quality and craftsmanship of this product. I was able to install this hitch on my 2009 Chevrolet Duramax Diesel myself with a little help from my wife. I would highly recommend this Hitch to anyone looking to purchase a gooseneck or fifth wheel hitch on their trucks. Great product, thanks.
George R - 02/14/2018I've done business with this outfit before, Fabulous!
Do you have a question about this Gooseneck Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.