B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
(3281 reviews)
Price: $599.00
In Stock
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Item # BWGNRK1111
Our Price: $599.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3281)
- Q & A (0)
- Photos
B and W Gooseneck Hitch - BWGNRK1111
- B and W
- Removable Ball - Stores in Hitch
- Below the Bed
- Wheel Well Release
- Manual Ball Removal
- 30000 lbs GTW
- 2-5/16 Hitch Ball
- 7500 lbs TW
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- Access handle at rear driver's-side wheel well
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs
- Tow a 5th-wheel trailer with the B&W Companion hitch adapter
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 4" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
GNRC800 B and W Turn Over Ball Under Bed Gooseneck Trailer Hitch - 30,000 lbs
GNRM1111 B and W Turn Over Ball Gooseneck Custom Installation Kit
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2016 Ford F-250 Super Duty 6-3/4 Foot Bed without OEM Prep Pkg
- 2011 - 2016 Ford F-250 Super Duty 8 Foot Bed without OEM Prep Pkg
- 2011 - 2016 Ford F-350 Super Duty 6-3/4 Foot Bed without OEM Prep Pkg
- 2011 - 2016 Ford F-350 Super Duty 8 Foot Bed without OEM Prep Pkg
- 2011 - 2016 Ford F-450 Super Duty 8 Foot Bed without OEM Prep Pkg
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1111
Average Customer Rating: 4.8 out of 5 stars (3280 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: Roger J.07/11/2023
I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!
by: Josh11/08/2022
The hitch’s main parts are good it’s the hardware that’s very lacking. Torqued the bolts to spec and the lock washers spread wide open
by: Kyle11/21/2023
Received the wrong hitch, but customer support was awesome and very helpful. Got everything corrected and I’m good to go!
by: Randall09/08/2023
2012 Ford F-350 Super Duty
Great products great shipping boxes didn't show up with stuff hanging out or missing like you'd expect from stuff this heavy went together great very heavy works great wish it had instructions instead of having to use them on the phone
by: Jamie 07/09/2022
Ford F-250 Super Duty
2013 f250. Bought this to haul 6 horses in our trailer. Works great never had a problem yet. Simple install, will buy another one for my next truck.
Jamie
7/19/2023
Been using for over a year every Sunday. Zero problems good hitch
by: Robert 07/26/2023
2016 Ford F-250 Super Duty
Good fit for my 2016 F250 4x4 6.2 gas. Hardest part was torquing all the bolts. Tight quarters to get enough leverage on the torque wrench to tighten at those specs.
by: Chris09/10/2023
Seems like a very well made hitch. Installation directions are very good and were great for a do it yourself guy like me!
by: Mark08/31/2023
More about purchasing from etrailer than the hitch!!! Be aware of their website and double check everything or you will be paying $XXX to return it….
by: Rory 05/03/2023
The customer support I received when ordering the hitch was fantastic. The hitch arrived in 3 days. Installation instructions were easy to follow, and it only took a 3 hours to install. It fit my truck perfectly, cant wait to install a companion 5th wheel and hit the road!!
by: Samuel06/16/2023
Well, I placed my order and was excited that I'd have it for the weekend to put it on my truck. I received it and the turnover hitch was the wrong one. I ordered it on the website and according to the site, I did enter a 2022 Silverado HD, it was the correct one for my truck. So I called customer service to find out that i would be able to return it, but the correct one would be 100.00 more. So I paid for another one and will be patiently waiting on another one. Should have just ordered it locally, would have saved time.
by: Ted 06/04/2023
2012 Ford F-350 Super Duty
Well made product and the instructions were pretty good. I suggest watching a YouTube video about the install. I did it by myself with the trucks up on jack stands but it would have been a lot faster for two people.
by: Joseph03/09/2023
I got a price from a local trailer shop that’s actually owned by very good family friends on the B&W turnover hitch and red label air bags for my F250, not only was e trailer cheaper but they were 500+ cheaper. I’ve always been skeptical on online shopping and usually avoid it at all cost and will pay more for face to face transactions but this was too much savings to pass up on. I also received the hitch and air bags a day sooner than expected which is a big plus. 10/10 would recommend.
by: Barry05/03/2022
Excellent customer service and The best gooseneck hitch you can buy!!!
by: Nathan 09/07/2022
Easy to install only took a free hours. Great product. Would
Buy again
Nathan
9/7/2023
Hitch works as it should nothings rusting or freezing up. Product is working just as well as the day I put it in
Mike L.
10/31/2023
@Nathan That's great! We're glad to hear your # BWGNRK1111 B&W Turnover Ball gooseneck hitch is working well for you!
by: Justin02/20/2019
2015 Ford F-350 Super Duty
good quality product. packaged neatly with no missing pieces. nice paint finish. fairly straight forward to install with included instructions. cross rails need a little persuasion to get in place. on my f350 longbed 6.7 I had to unbolt 3 bolts on rear tailpipe section and lower it to install the main hitch assembly. very satisfied.
by: HermanS09/11/2019
This kit is an exact fit for my truck. The install was fairly easy but definitely not a 2 hour install like one guy made it out to be, he must have had lots of help and it on a lift. My install was 4.5 hours. My biggest problem was the drivers side front bolts, I dropped that bolt about 3 times and hunted it till I found it. Finally reaching over the urea tank top I got that bolt in place. Foregoing that 1 bolt I would have been finished in 3.5 hours. It fit exactly the way it was designed and looks fantastic.
by: Carl 08/31/2023
Great price, great product delivered day early
My go to for trailer parts
by: Dale04/01/2018
2015 Ford F-250 Super Duty
Great hitch and like it. Until I used the drop in fifth wheel plate by B&W (RVK3500). There is a bolt u have tighten up to secure the hitch down. When I tightened it to 60 foot pounds it bent the main pin in the hitch. After fighting the pin to release now the pin is bent. And i cant use the gooseneck ball. And I can't remove the pin to replace it unless I remove the hitch. So long story short the gooseneck plate is good and works great as a gooseneck. But don't buy it planning to use the fifth wheel plate. Won't buy that again.
Mike L.
4/2/2018
After speaking with one of our contacts in the Tech Services department at B and W and was told that really the only way the ball retention pin can get bent is if its not slid fully into place when that draw-down bolt is torqued down. Please call us if you have further questions.
by: Bobby 04/25/2023
2011 Ford F-250 Super Duty
The product was top quality which was the reason for the purchase. The customer service and prompt shipping is what makes etrailer the best!!
by: Chris 04/13/2023
The hitch was easy to put in, I think dad, my brother in law and myself had it in within a couple hours, only had to drill the hole down through the bed and the exhaust was the only real obstacle
by: Richard 10/02/2021
Installed hitch today. Because it’s an older truck it was not as easy as it would have been on a newer truck. Everything went well. Watched installation video as we installed. Helped a great deal. Very satisfied with it.
Richard
10/5/2022
still very Happy, still works like new. great quality.
by: Donald M.12/12/2018
2011 Ford F-250 Super Duty
It showed up on time, had everything needed for the install, and fit perfect on my 2011 F250 even with my firestone airbags. Also, the video they had for the install was a HUGE help.
by: Robert 08/07/2021
The ordering and customer service is excellent. Shipping is super fast and communication is excellent. Installed quick and easy as per installation video. Highly recommend your company. B&W is the best hitch on the market today.
Robert
8/9/2022
It has and is the best hitch on the market today. It’s my third different B&W hitch I have owned. I highly recommend for ease of installation and durability. Five Star all the way
by: American Patriot Garage07/06/2023
Always great customer service and correct parts sent.
by: Darrell Morris04/16/2017
2016 Ford F-250 Super Duty
Love the hitch. Works like a champ takes a while to install but not too bad. I was missing 2 lock nuts in mine but everything else was good.
25
3264
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- Will B&W Gooseneck Hitch from 2015 Ford F-250 Fit 2012 Ford F-250Yes, the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1111 fits a 2012 and a 2015 Ford F-250 whether they have a long or a short bed. Please note that if you have already installed this gooseneck hitch once you will need to use new mounting hardware. I spoke with my contact at B&W who said that if you contact them they have the replacement hardware kit that you would need to do so.
view full answer... - Will B&W Turnoverball Underbed Gooseneck Trailer Hitch Fit 2013 F-350 with Air Bags The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1111 referenced in your question, which is confirmed to fit your 2013 Ford F-350, features brackets that mount to the outsides of the frame rails on the truck. As long as your air bags use brackets that mount on the insides of the frame rail, there will be no interference between the two systems. This is a great, heavy-duty gooseneck hitch with a 30,000 pound gross towing weight capacity that will allow for complete truck bed...
view full answer... - Does the B&W Turnoverball Gooseneck Hitch Come with the B&W Hitch BallYes. The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1111 comes with the Turnoverball gooseneck hitch ball included. You can turn over the ball and store it inside the hitch, so you'll be able to keep the inside of the gooseneck receiver free from dirt and debris, plus you'll always know where the ball is stored.
view full answer... - Can Gooseneck Hitch On 2011 Ford-F-250 Be Installed On 2016 Ford F-250The installation kit that is included with the B&W Turnoverball Underbed Gooseneck Trailer Hitch, part # BWGNRK1111 can be used in your 2016 F-250. You will want to make sure none of the hardware has been damaged. If you find anything that looks like it needs to be replaced you will need to use grade 5 hardware for a replacement.
view full answer... - Squeaky Gooseneck Hitch TroubleshootingI spoke to my contact and B and W and he told me that their hitches don't usually squeak. If anything they would rattle if something wasn't tightened down all the way. In most cases squeaks come from trailers and not from the hitches. It would be hard to do, but if you can get someone to ride in the bed of your truck while traveling at a low speed in a straight line preferably somewhere like an empty parking lot you could hopefully pin point where the squeak is coming from.
view full answer... - Finding Center of Truck Bed for Install of B and W Turnoverball Gooseneck with Bedliner In TruckYou could go to the very rear of the truck bed where the bed liner ends and measure from left to right there to get the left and right center and then take that measurement forward. The bed liners are also really well made now that if you used the distance between the wheel wells even with the bed liner covering them you'd get a close enough dimension easily to install the B and W Turnoverball hitch # BWGNRK1111. I attached an install video for this on a similar 2016 Ford truck for you...
view full answer... - B and W Gooseneck hitch Recommendation for 2012 Ford F-250The B and W Gooseneck hitch part # BWGNRK1111 that you referenced has been confirmed as a fit for your 2012 Ford F-250 and will fit with the lift kit you have, but you should note that it will be pretty difficult to tow a trailer level with a truck that sits up that high. That being said, the hitch will fit your truck. I attached an install video for you to check out as well.
view full answer... - How to Determine if Latch Pin for B&W Turnoverball Gooseneck Hitches is in the Latched PositionThe latch pin on the B&W Turnoverball Underbed Gooseneck Trailer Hitches, like part # BWGNRK1111, are spring loaded so you don't have to force it back into place. You can verify that it is in place by installing the gooseneck ball in the receiver, releasing the pin, and then checking to make sure the gooseneck ball can't be removed by pulling upwards on it. Attached is a review video for you to check out as well.
view full answer... - Where to Drill the 4 inch Hole in the Truck Bed of 2015 Ford F350 to install BW Turnover GooseneckThe ball hole location set out in the instructions for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1111 was made with the installation brackets and hardware of the # BWGNRK1111 in mind. The hole may not be perfectly in the recessed portion of your truck bed, but it will match up with the hitch once installed. If you drill the hole where you think it would be in relation to the recessed portion of the bed it won't line up with the gooseneck ball once the hitch has been...
view full answer... - Will 5th Wheel Pin Weight be Too Much for a Ford Pickup with Aluminum BedEven though Ford seemed to get a lot of backlash for moving to an aluminum bed (not frame), some of the other pickup manufacturers are actually looking at releasing their upcoming lines with aluminum beds (as of August 2018). When it comes to 5th wheel or even gooseneck towing, the brackets for the system are installed on the steel frame of the pickup. This means that you won't be relying on the "weaker" (as some have put it) aluminum bed to carry your pin weight. If you lookup the specs...
view full answer... - How To Tell If a 2011 Ford F-250 Has a Factory Prep PackageI have attached a photo for you that shows what the factory prep package looks like. This package contains a set of five holes in your truck bed for use with 5th wheel and gooseneck accessories. If you did have this package then most likely you would already be aware of this. The B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1111 is correct for your 2011 Ford F-250. In regards to the lift and larger tires, this will not be an issue for the above so long as you have a suspension...
view full answer...
- Gooseneck Hitch For 2011 Ford F-250I wish we had the ability to look that up, but Valley has been out of business for so long there's no way to find part number information. Best option we have is a B and W gooseneck hitch part # BWGNRK1111 which is a confirmed fit for your 2011 Ford F-250 and would work great. B and W is the industry leader in the towing world for their incredibly high quality hitch solutions. I attached an install video for more info for you to check out as well.
view full answer... - Truck Bed Dimension for B and W Turnoverball Installed in 2012 Ford F-250In the red circle you made (very bottom) it actually says what the distance is that you need to measure. It's 46-1/2 inches for long and short bed trucks. That is measurement from rear of truck bed to where the ball would be placed. Then the centering would be from left to right.
view full answer...
- Will Both Air Lift Air Bags and B&W Turnover Ball Gooseneck Hitch Fit a 2011 Ford F-250Actually, you can use the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item # BWGNRK1111 even with the Air Lift air bags installed on your 2011 Ford F-250. The upper brackets for the air bags mount on the inboard sides of the frame and have bolts that go through the frame. The frame brackets for the B&W hitch install on the outboard sides of the frame and have holes in them for the air bag bolts. So no worries! I have linked a video showing an...
view full answer... - Where are Coils of Springs on B and W Turnoverball to Release Stuck LatchI attached a picture that shows where the spring coils are that you'd need to cut on the B and W Turnoverball # BWGNRK1111.
view full answer...
- Instructions For Removing And Reinstalling A B&W Turnoverball Hitch Into A Newer Truck Before removing the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1111 from your old truck you'll want to first verify that it'll fit the new truck. Once you know that it will fit you'll just remove it in reverse order of the installation. I've attached the installation instructions below as well as one of our installation videos so that you can follow along with it to remove it and then reinstall it into your new truck. I do want to note that B&W's...
view full answer... - Recommended Pin Weight Rating for Towing a 5th Wheel/Gooseneck Trailer with a 2015 Ford F-350The recommended pin weight for a 5th wheel trailer, even if it has been converted to a gooseneck, is 20% of the loaded weight of the trailer. This is regardless of the vehicle you are towing it with. If you do not already have a gooseneck hitch installed on your 2015 Ford F-350 I highly recommend the B&W Gooseneck Trailer Hitch # BWGNRK1111 which uses a Turnoverball for a clear bed when not towing, plus it is made right here in the USA! When I looked up the owner's manual for your F-350...
view full answer... - Would B and W Turnoverball Gooseneck from 2017 Ford F-350 also Fit 2012 Ford F-250There was a large enough change between the 2016 and 2017 Ford F-350s that B and W had to come up with a new design for their gooseneck hitch fits. So for your 2012 Ford F-250 you'd need to go with the # BWGNRK1111 instead of what came out of the 2017 truck.
view full answer... - What is the Shipping Box Size of B and W Gooseneck Trailer Hitch and Install Kit BWGNRK1111The B and W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1111 comes in 2 packages. The first is the mounting kit and it is 44.13 inches by 4.63 inches by 8.13 inches. The second package is the hitch itself and it is 28 inches by 5.125 inches by 8.75 inches. The total shipping weight is 92 pounds. I have included links to the installations instructions and a video review for you.
view full answer... - Can B and W Turnoverball Gooseneck Hitch be Installed in Truck Bed with Slide in BedlinerYes, the B and W Turnoverball Gooseneck hitch part # BWGNRK1111 that you referenced can be installed in a truck bed that has a slide-in bed liner like you mentioned. You would just need to trim the bed liner around where the ball would come through and you'd be fine. I attached a picture that shows the modifications you'd need to make to the bed liner. I also attached an install video for the # BWGNRK1111 for you to check out as well.
view full answer...
- Recommended Installer for B&W Turnoverball On a 2016 Ford F-350The best place to have the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1111 installed on your 2016 Ford F-350 is going to be an RV dealer with a service center as they will be the most experienced with these types of installs. That said, we do not have any recommended installers outside of our facility. Please note, the above is a custom fit kit so you don't have to do any drilling into the frame for instillation and there is an embossed spot for the hitch ball hole...
view full answer... - Can B and W Turnoverball Gooseneck Hitch From 2008 Ford F-350 Fit 2016 ModelWhat you'd need to install the B and W Gooseneck Turnoverball Hitch in your 2016 Ford F-250 is a rail kit that will allow you to use the center section you already have. For that you'd need the # BWGNRM1111 and you'd be set.
view full answer... - Can B and W Turnoverball Hitch Center Section from Older 2002 F350 Adapt to Fit 2016 ModelYou can take the gooseneck hitch center section from your B and W hitch and use the rail kit part # BWGNRM1111 to install it in your 2016 Ford F-350. I attached an install video for the kit that fits your 2016 F-350 for you to check out as well.
view full answer... - Will the B&W Turnoverball Gooseneck From a 2007 Ford F-250 Fit a 2011 Ford F-250The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2011 Ford F-250 is part # BWGNRK1111. The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2007 Ford F-250 is part # BWGNRK1108. However, they both use the same center section so you could transfer this from the 2007 to the 2011 with just the B&W Turnoverball Gooseneck Custom Installation Kit for Ford part # BWGNRM1111.
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Noah M
Test Fit:
Randy B
Test Fit:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/10/2022
It is unusual for this to happen. I will have our Customer Service team reach out to you.