Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be looking at the Performance Tool four inch carbon fiber digital caliper. Part number PTW80157. This allows you to read from 0 to 4 inches or 0 to 100 millimeters. It moves in 100ths of an inch or 1/10ths of a millimeter. It has a nice LED screen. You hit the on button and it's easy to read.
You can switch between millimeters and inches. Right now it's in inches and now it's in millimeters. Just by the touch of a button. We also have our zero capability so when we move it down our measurement tool, if we want to measure something and see the difference between another measurement, we can hit the zero button and it shows us the difference. This is a negative distance or a positive distance.
Take it back to zero and hit the zero button again so we can start back from zero inches or zero millimeters. This allows us to measure the outside diameter or the inside dimensions with the other side. Now we can show you in action. On our trailer here, we pulled off our seal. Usually it's stamped with the measurements on it, but this one has worn off over time. WE can use our tool to find the inner dimension of our race.
2.18 inches. If we need to figure out the outside diameter, that'll be 3.35 inches. Other measurements that we might need to know. Come to our shaft. We've got the bearings that sit on our shaft so we might need to know the diameter of our shaft.
We can come up, be 1.24 inches and that'll be for our inner or our outside bearing. If we need to figure out our other, the larger bearing, the inside bearing, we do the same thing. 1.74 inches. Now if we need to know the difference between the two, we come up we get the inside bearing, we hit our zero button, that zeros it out, and we can come to our outside bearing and we see there's almost a half inch difference between the two bearing sizes. Same works if you want to figure out the dimensions here for our race because that's where it sits. This is where our race sits. If I want to do difference in that. I'll take our meter, I'll measure the inside diameter of our race, I'll hit the zero button, and then I can come and measure the outside distance of our race and see if there's any difference at all. Which, there's not, but if there was it would show us. There would be a negative difference or if I measure something bigger, it would show us a positive difference. That's it for a look at the Performance Tool 4 inch carbon fiber digital caliper. Part number PTW80157.Speaker 2: You can find this and everything else right here at etrailer.com What's up man.
Average Customer Rating: 4.7 out of 5 stars (23 Customer Reviews)
Cheap Carbon Fiber Digital Caliper. Threw it out after one attempted use.
It works great and it's just plain fun. I bought it to measure bearing buddies and spindles. It works for that but it also has been great for measuring the diameter of carbon fiber tubes I'm using to build a sailboat mast and spars.
It gives instant metric to inch conversions - just push the in/mm button and the measurement in the display converts.
I've used it at least a couple of hundred times and it's still on the original battery.
Pro tip: Close it all the way before you turn it on.
Works as described.
I have always wanted a digital caliper now I have one. I have always relied on my older read out types since this is the one etrailer uses I will be able to take the same measurements they do . My local bearing supplier has priced themselves out of the market so I use etrailer !
Good product
A very nice useful tool. First one I got had a malfunction and the company sent me another one right away
I have not used it yet but what I want to use it for it will work just fine then I can order the right parts for my trailer weather is not good right now to use it
Thanks so much for this page especially the links the videos.
You all are the best,
Everything works, all parts needed were there, and the instructional videos were exactly what was needed for a first-timer!
Excellent tool for the money not sure how long it will last, but it does work.
Works as described
All three items received in good condition and fast.
Delivered early, packaged well, will try out soon
quick delivery
Do you have a question about this Hand Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larry J.
4/4/2018
Great tool. Use it all of the time