Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this anti-rattle clamp to keep your hitch-mounted accessory from rattling and wobbling in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.
Features:
Warning/Note: Not for use with receiver tube extentions.
Average Customer Rating: 4.7 out of 5 stars (700 Customer Reviews)
Use this anti-rattle clamp to keep your hitch-mounted accessory from rattling and wobbling in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.A simple design that reduces noise and adds stability. To get proper alignment between my RV and my towed vehicle, I needed 2” of drop. After a few trips, I could feel the movements and hear the noise. Upon installing these anti rattle stabilizers, it was apparent that both issues were resolved.
The anti-rattle hitch stabilizer works like a champ. One thing I'd recommend if you're using an extension piece for the hitch is to check periodically to make sure the anti-rattle didn't slip out of place and might need readjusting.
The etrailer anti-rattle hitch stabilizer does exactly what it is designed to do. I hear no rattle from anything attached to my hitch.
This worked extremely well! I had to modify the install because of my hitch/bumper. Even with the nuts down (used some loctite) they didn't budge when pulling a square-drop trailer across back roads in Wyoming Wind River range. In fact, I lost the nut off of the ball hitch and not this stabilizer! Would definitely recommend.
Perfect , especially if you have the hitch type mud flaps. Holds tight and secure .
Dennis
8/19/2023
Still on the hitch and working great
This anti-rattle device works very good. Does exactly what it says it will do. Had to knock off a star because the vinyl coating has split from usage but overall I am very happy with my purchase. Quieted down the trailers just fine, eliminating the cluncking when going over bumps or starting / stopping.
Elperroferoz
5/27/2023
Still working as described. Much quieter when using it than without it. Still very happy with my purchase.
Worked well while on a trip using a cargo basket, and did not loosen up
Christopher
10/16/2023
used it on a cross country trip, worked very well
Mike L.
11/8/2023
Using this on a kuat 4 place bike rack with 2 very heavy ebikes and two normal mtb bikes, the rack is at its limit but with this anti sway the rack has been working excellent. Would not try without using this anti sway as the bikes I’m loading are very heavy.
Dave S.
4/23/2023
Great anti sway device
Got product today and mounted it in minutes. It definitely made my dominator hitch step more secure. No more wobble or play.
My only observation is that the instructions sent in the packaging show (& tell) you to slide the Ubolt down over the hitch with the plate on the bottom. The videos on etrailers site says plate on top. I assume it can go either way? I put the plate on the bottom for my situation because it seemed to fit better.
So far seems like a great, solid product.
Sometimes Hitch's still move a little when you hit the gas or brake. Mine did and while driving, I would worry if all was OK back there. The Anti Rattle Hitch did as promised. No shakes or rattles, so no more worries
Sonny
5/6/2023
Havent had to do anything. Its like the commercial-set it and forget it.
I have always had good service from etrailer.com and can highly recommend their products.
George
8/18/2023
It’s working great. Bolts stay tight. No problems
Mike L.
9/13/2023
I am giving this product 3 stars only because the printed installation instructions that came with the stabilizer are 180 degrees different from what is show in the videos on the etrailer website. Whose instructions do I follow???? Is the flat plate meant to be on the bottom or the top of the receiver? Please correct this!
Brooke M.
4/26/2023
Great question! In reality, you can use it either way. Whatever works best for your application is the way to go!
Be sure this will work on your style of hitch. We have the OEM // factory installed (integrated) tow package on our 2020 Toyota Highlander and we have to install it upside down to make it work. Also, the yellow rubberized part only lasts for 1-2 uses before it is cracked // split and no longer functional.
Works great! Be sure to tighten down to prevent slipping loose. Will upgrade the lock washers and nuts and even double nut for added stability.
This has yet to be used. It should prevent the movement of the trailer receiver wiggling in the hitch once installed. This should eliminate some of the noise while towing a small or boat.
Solidly built. Easy install. Stabilizes the carrier on the back of my Travel Trailer. I like that it can be installed without removing the carrier from the receiver.
Bill D.
5/5/2021
I have transferred it to a new fifth wheel. It’s still working great. No rattles and it stabilizes the carrier with my generator and e- bike mounted on it thus reducing the bounce load on the hitch.
Good idea. My installation instructions showed installing clamp opposite what is demonstrated in your video. I should have believed your video. The clamp works better installed as shown in the video. Also don't bother with the included wrench. Save time and use your own.
Work very well when tight. Problem is lock washers won’t hold and are junk. Had to check and tighten every two hours on road. Trying new better washers now.
All but eliminates the wobble on our bike hitch.
John
4/10/2023
works as promised
I'm full time in a motorhome with a tow, so this gets constant use. I rate it average or slightly above. It compares with others on the market. The Vinyl coating will eventually wear through as you retighten with lots of use but honestly, it doesn't make a difference with all the other noises on a motorhome. I would purchase another one if needed.
Must have product. Squeaks and rattles drive me crazy on road trips and this should take care of that problem. Thank you E-trailer.
This is a great device. Towing was very noisy. I installed this and it silenced the rattle. I could finally hear what the trailer was doing. Definitely recommend if you're any lengthy towing
Had to put it backward from what the instructions say and also based on a few other review and it works amazing. I don’t feel my cargo carrier at all on my Forester
I have a cargo basket on the back of my suv. I liked it but in addition to the rattle it would sway left and right. I use this vehicle daily and this item was the single most important part of the set up. If you don’t get one, your missing out on stable, quiet operation with your hitch receiver. It’s great!
The instructions for anti-rattle hitch stabilizer said to mount it the opposite of what the video states. I will try it both ways and see which works best.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stan
8/23/2023
The etrailer anti-rattle hitch stabilizer has been keeping my hitch attachments noise free.