Draw-Tite Reducer Sleeve - 3" to 2-1/2"

Video Transcript for Review of Draw-Tite Hitch Adapters - 3 Inch to 2-1/2 Inch Reducer - 58552

Today we're going to take a quick look at the Draw-Tite Reducer Sleeve. This allows you to use a three inch hitch with two and a half inch accessories, so it just reduces that sleeve that opening down as the name suggests. It's going to have a five eighths diameter pinhole, so we can use that with any pin or locking hip pin that has that five eighths diameter. You can see our outer dimension there is three inches, the inner dimension is two and a half. It's pretty easy to use, just slide it into your hitch and then line that up with the hitch pin holes and your accessory and get that installed. That's really the trickiest part is getting everything to line up all at once, so you definitely don't want to use your finger to do that or else you'll end up like this with a mashed up, bruised finger.

If you need to line it up use the hitch pin or your locking pin to get that all in a line.As far as our other dimensions, it measures about six inches long and then of course it's going to be three inches on both sides. It does come with a one year limited warranty from Draw-Tite. It has a durable, metal shield finish and this can be used with weight distribution systems. That's going to do it for our look at the Draw-Tite Reducer Sleeve.