Product Experts Available Now!
Call 800-298-1624
2 min
EST. CALL WAIT TIME: 2 MIN
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
(24 reviews)
Price: $299.00
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
Retail:$394.95
Our Price: $299.00
You Save: $95.95
This item qualifies for Free Shipping
In-stock alternatives that can ship today
- All Info
- Reviews (24)
- Q & A (95)
- Photos
- Why etrailer?
Yakima Hitch Adapters
- Swing-Away Hitch Adapter
- Fits 2 Inch Hitch
- Yakima
- Steel
This hitch extender converts your existing bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. Fits 2" hitches and bike racks that hold up to 4 bikes. Lock included.
Features:
- Pivoting hitch extender lets you swing your existing bike rack 90 degrees away from the rear of your vehicle
- Works with most bike racks, cargo carriers, and other hitch accessories for 2" hitches
- Provides easy access to your hatch or tailgate area
- Easy-to-use safety latch and spring pin system releases arm so it can swivel out
- Swings out 90 degrees and locks in place automatically - no pins required
- Same Key System (SKS) hitch lock deters theft of the swing adapter
- Easy installation into your vehicle's 2" hitch
- BackSwing secures to hitch with included anti-rattle hitch pin
- Bike rack (sold separately) installs into BackSwing and secures with bike rack's hitch pin
- Durable, black powder coated steel resists corrosion
Specs:
- Application: 2" x 2" trailer hitch receivers
- Capacity: up to 4-bike rack
- Weight capacity: 250 lbs
- Dimensions: 30" wide x 20" long x 8" tall
- Distance from center of hitch pin hole to:
- Center of closest rack pin hole: 14"
- Closest edge of carrier when folded: 8-1/2"
- Farthest edge of carrier when folded: 16-3/4"
- Farthest edge of carrier when unfolded: 28"
- Top of handle: 6-3/4"
- Shank rise: 3-1/2"
- Weight: 35 lbs
- Limited lifetime warranty
Notes:
- The BackSwing is only compatible with 2" hitches and dedicated 2" accessories
- Not for use with hitch adapters, reducers, or extenders
- Not for use with 1-1/4" accessories that use a 2" adapter
- Using this hitch extender will reduce your hitch's overall capacity by 50 percent
The Yakima BackSwing converts your existing 2" bike rack into a swing-away rack, giving you complete access to your hatch or tailgate area. This swing-away hitch extender is also compatible with other 2" hitch accessories, like cargo carriers and grills. The BackSwing installs in your 2" hitch with the included anti-rattle hitch pin, and a SKS hitch lock deters theft of the extender.
Swing-Away Design for Full Access to Rear Cargo Area
The BackSwing features a hinged arm that lets you swing the rack, or accessory, 90 degrees away from the rear of your vehicle. This provides maximum access to your vehicle's rear cargo area and eliminates the need to unload or remove the accessory when you're unloading cargo or letting your dog hop in or out of the back.
Because the BackSwing also works as a hitch extender, it's perfect for vehicles with a rear-mounted spare tire.
To open the hinged arm, simply disengage the release lever, pull the spring pin, and swing the rack away from the rear of your vehicle. The BackSwing will easily rotate outward to provide an additional separation from the rear of the vehicle. The arm will lock into place once it's fully extended at 90 degrees, so your hands are free to open your hatch and remove cargo.
To close the BackSwing, just pull the release lever at the end of the adapter and swing the extended arm back into position. Once you hear the spring pin lock into place, put the safety latch back into position, and you're ready to go.
Compatible with Most 2" Hitch Accessories
This versatile hitch extender will work with most bike racks or hitch accessories with a 2" shank. It works with both platform and hanging bike racks, and it can support up to 4 bikes on either syle of rack. The BackSwing has a weight capacity of 250 lbs, not including the weight of the bike rack or bikes, so keep in mind the weight of your rack when deciding how many bikes can be safely loaded for your application.
The BackSwing also works with hitch-mounted cargo carriers to provide expanded storage without limiting access to your vehicle's hatch or tailgate area. You can even pair it with a hitch-mounted grill, allowing you to pivot the grill out away from the vehicle, while retaining full access to coolers and supplies while grilling.
Before mounting your accessory, be sure it is a compatible hitch accessory. The BackSwing is only compatible with accessories that have a dedicated 2" shank, and it shouldn't be used with any type of adapter. If you aren't sure if your acessory is compatible with a hitch extender check with the accessory's manufacturer. Once confirmed, slide your accessory's shank into the BackSwing, install the accessory's hitch pin, and then follow any specific directions the accessory has for installation.
Once you have secured the shank of the accessory into the BackSwing's receiver, tighten down the stabilizer bolt and nut on top of the receiver tube until snug. This will hold the accessory in place and ensure a tight connection that reduces movement and noise while on the move.
Easy installation with Threaded Hitch Pin
The BackSwing installs quickly and easily with a threaded, anti-rattle hitch pin. Simply slide the shank into your 2" hitch receiver, insert the threaded hitch pin, and tighten it down with a wrench. This will also reduce noise and movement while the extender is installed. The unit comes with a hitch lock that uses a Yakima Same Key System (SKS) lock core to secure the extender to your vehicle. SKS cores can be swapped out to make all your Yakima products keyed alike.
Lastly, the BackSwing is only compatible with 2" receivers and shouldn't ever be used with a hitch adapter, reducer, or extender.
8002483 Yakima Back Swing Hitch Swing Adapter for Hitch Bike Racks - 2 Inch Hitches
Item # Y02483
Installation Details
Customer Reviews
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches - Y02483
Average Customer Rating: 4.9 out of 5 stars (24 Customer Reviews)
This hitch extender converts your existing bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. Fits 2" hitches and bike racks that hold up to 4 bikes. Lock included.
- Y02483
Jake - 12/05/2020
by: Jake12/04/2019
I installed this unit on my Sprinter van because my bike racks did not have enough clearance for the rear doors to open. The BackSwing was as advertised. It provided plenty of clearance for both doors to open without interference. I've purchase a few items from etrailer and have not been disappointed.
Comments
Weve taken several road trips and the Back Swing has worked as advertised with no issues.
Jake - 12/05/2020
- Y02483
James R - 02/15/2020
by: James R02/14/2019
This is awesome. I am now able to use the back door on my Jeep and still keep my bike on the rack. This is my second item purchased from e-trailer. You need to let the people of Rad electric bike know about your great products. I am posting some pictures on the Facebook page for the other owners. Thanks again
Comments
Great. We have traveled to cape cod and used our electric bikes on there trails. With out this bike rack I don’t believed I would transport the bikes anywhere. Thanks. We are super happy.
James R - 02/15/2020
- Y02483
by: Curtis04/12/2020
The product came in a timely manner and everything went together perfectly. I’m using the swing hitch to carry a Champion 2000 dual fuel inverter generator (see picture) on a TorkLift generator carrier. The generator is being used to power a portable 200 square foot Hisense A/C. I ran the truck down the highway and everything is solid.
- Y02483
by: Eric06/29/2020
This product seems to be really well built. I just got back from a 3 day off-roading trip. No issues what so ever and we encountered hours of extremely rough roads. This allowed me to carry gear and cleared my aftermarket tire carrier.
- Y02483
by: Tim08/10/2019
High quality product. Fits my stock JK Wrangler hitch. Allows clearance for my slightly oversize tire and swings out far enough for access to the back of the Jeep. Easy install with no hiccups. I use it for my fat tire E-bike with no problems. I do not keep my bike rack installed all the time due to the length of the swing arm and bike rack combined adding extra length to my daily driver Jeep. Check out the pics. Installation of the bike rack is very easy to do. I ride my bike daily and at times have need to get picked up due to mechanical problems. Since I don't have the bike rack on the Jeep my wife has to install the bike rack in order to come get me. I have a rolling cart jack with the bike rack so my wife can load up the rack in just a few minutes to get me and the bike. The swing arm and bike rack tends to place the bike a distance from the back of the Jeep but it also allows easy access for the install and prevents the pedals and other bike parts from contact with the Jeep. Very pleased with this unit. My bike rack is a 2 bike rack but I have removed one side.
- Y02483
Malcolm - 05/12/2020
by: Malcolm05/12/2019
One of the best accessories I’ve bought for my Jeep!! It makes traveling with a hitch basket SO easy! Prior to getting this, I would have to get on the ground to unlock the basket hitch, have my wife help me pull it off (with or without stuff on it), and then finally have access to the trunk. We travel with our dogs in a cage system in the back buckled in so this process made bathroom stops almost a 45min ordeal. With the Backswing I can get into the trunk area in 15seconds, what used to take 5mins or more. AMAZING!!!
Comments
Phenomenal!!!
Malcolm - 05/12/2020
- Y02483
by: Zachery09/03/2020
I use this in conjunction with a Hollywood bike rack. They are on a Chevy Express van with cargo doors. I haul 2 tandems. This set up has been a life saver.
- Y02483
by: Stephen05/04/2019
Another excellent Yakima product. Now I can get in and out of my truck camper without climbing over bikes. Great service from eTrailer
- Y02483
by: Daniel05/30/2020
Game changer! Easy to assemble and install. Nice smooth rounded design vs other swing adapters I was researching. Heavy duty for sure. Nice product Yakima! Installed in 2016 Chevy Suburban LT. Thank you etrailer.com for the videos reviews. Was a major influence in making this purchase! Also- it came 2 days early!
- Y02483
by: Charles12/05/2019
Nice unit. Installed on my 2019 Subaru Ascent. The way the factory hitch is on this vehicle (very high) any accessory like a bike rack or tray is going to be hit by the lift gate. This takes care of that. Assembled easy except for one snap ring that needed some extra efforts to install. Attached a tray carrier and seems to be a nice set up . I may end up bolting tray hitch pin to allow it to be tightened up assure it doesn’t wiggle too much. If your tray or bike rack has a locking pin set up that would be the best. It does add a bit more than a foot of length to the whole set up. In my case I would have needed to install an extension anyway so this is the best option.
- Y02483
by: Earl09/23/2019
Used this in conjunction with a 2'x4' cargo carrier on the back of a jeep Wrangler. Works quite well even with the spare tire still mounted. The spare tire does keep the door from opening past about 80 - 85 degrees but it is more than enough room to open everything. The unit comes with a bolt and lock rather than a hitch pin and I drilled that out to accept a standard pin as I take this off and on very frequently and need the convenience of a standard pin and snap ring. Happy with the unit and fit.
- Y02483
by: D.P.07/01/2019
Purchased this to use with the Yakima HoldUp EVO bike rack. It's very convenient to be able to swing the bikes out of the way instead of having to remove them to open the tailgate, especially when it may not be necessary (or practical) at the time to take the bikes off your rack. It requires tools and doesn't install as quickly as the HoldUp EVO, so I don't use it in quick trips around town, but you can leave it installed and take the bike rack on an off if necessary. Solid steel construction and durable.
- Y02483
by: Lee H06/30/2020
There’s no doubt this thing is spendy! But the first time you swing it open and can access the back of the truck without ducking handlebars or taking a pedal to the back......worth every penny!
- Y02483
by: Mark08/01/2019
works great, fits perfect to our etrailer subaru hitch i had installed in the spring and our 15 year yakima bike rack mounted right on
- Y02483
by: Bobby X11/23/2019
Product functionally works great! The only flaw is that the plastic cover around the main hinge sits in front of the exhaust pipe and has melted a bit. My car makes a low hum when getting up to higher speeds and I think it's due to air getting under the melted plastic and causing a vibration but I can't test this theory.
- Y02483
by: Gary06/04/2020
Just what I needed for my FJ Cruiser to be able to open the back door which is also swing out. Now I can access my cargo. Well made product and great price. Thank You E Trailer
- Y02483
by: Keith12/30/2020
- Y02483
by: Jeff10/01/2020
Easy to install.
- Y02483
by: Kevin05/23/2020
Working as advertised. Easy to install and use.
- Y02483
by: Mark02/15/2020
Excellent product with an easy installation as shown in the video. Product shipped right away and was just as advertised.
- Y02483
by: Works G08/13/2020
Works very well as described.
- Y02483
by: Matthew06/19/2018
Amazing service and quick turn around. Thankfully they ship to APO AE over seas! I highly recommend this website and their services!
- Y02483
by: Jo12/04/2019
Easy to install. Product does what it is made to do. Very satisfied.
- Y02483
by: Rick11/20/2018
Have not installed yet, but amazingly fast shipping. Ordered Thursday evening and shipped same evening. It was scheduled to be in AZ on Tuesday, but got it early Monday. I will update once installed
33
33
Ask the Experts about this Yakima Hitch Adapters
- Will the Yakima BackSwing # Y02483 Fit on a 2012 Jeep Wrangler Unlimited with a Spare tireIt really depends on the location of the hitch pin hole on your trailer hitch. A trailer hitch like the Draw-Tite # 76104, which is a confirmed fit for your 2012 Jeep Wrangler Unlimited, sticks out significantly farther than OEM trailer hitches do so it would be less likely of an issue. I did measure the Yakima BackSwing # Y02483 and found that from the center of the hitch pin hole to the back of the arm assembly measured 8-1/2" while that same measurement to the handle was 11-3/4"....
view full answer...![Image 1 for]()
![Image 2 for]()
- Best 4-Bike Rack To Clear Rear Doors On a 2007 Dodge Sprinter The only way you are going to be able to open the rear doors on your 2007 Dodge Sprinter with a bike rack installed and the bikes attached would be to use a swing-away bike rack. I saw that you were looking at four bike racks so if this is how many bikes you have then I recommend going with the SportRack Ridge Swing 4 Bike Rack part # SR2415 which is currently the most cost effective option that fits the bill. However, you will need the SportRack Bike Frame Adapter Bar part # SR0500 for...
view full answer... - Can the Yakima BackSwing be Used with a Spare Tire Carrier for a 75 lb TireYes you can use the Yakima BackSwing # Y02483 with the Spare Tire Carrier # C31006 to carry your 75 lb tire. The BackSeing actually has a weight capacity of 250 lbs so you won't have to worry about overloading this product.
view full answer... - Read Door with Ladder Clearances when using Swing Away AdaptersThe Yakima BackSwing # Y02483 extends 22-3/4 inches to the side from inside edge to inside edge. A rough estimate of the length of the rear doors of your 2020 Winnebago Revel and the distance they swing out is 40" not including the ladder. If your hitch is centered on your 2019 Sprinter chassis, then you would only be able to swing your door with the ladder out 19-3/4" when using the cargo carrier, and 21-1/4" when using a bike rack like Hollywood Racks Sport Rider SE # HLY84FR. The clearance...
view full answer...![Image 1 for]()
![Image 2 for]()
- Comparing Yakima and Kuat Swingaway Hitch Adapters for Use on Jeep WranglerI like your line of thinking and would agree the pivoting adapter that extends out the most would be your best solution to give you best clearances possible past your rear spare. The Yakima # Y02483 is 4-7/8 inches longer than the Kuat # PV20B so the Yakima is the swing away adapter I recommend for you with the Hollywood Rack E-Bike rack part # HLY84FR. The review video i attached for it shows it installed in a Wrangler hitch as well.
view full answer...![Image 1 for]()
- Recommended Swing Away for Swagman 2+2 Quad Bike Rack on 4Runner with Aftermarket Spare Tire RackThe Swagman Quad 2+2 2-Bike and 4-Bike Platform Rack - 2" Hitches # S64692 has a measurement of 17-1/4 inches from the center of the hitch pin hole to the closest wheel tray. The shank raises at the 10 inch point. To get your swing away, I recommend the Yakima BackSwing # Y02483 which is 14-1/2 inches from pin to pin and will be away from the spare tire with restricted clearance versus on top. This means you will have 21 inches from the center of the pin to the upright rise in...
view full answer...![Image 1 for]()
![Image 2 for]()
![Image 3 for]()
- Can Yakima BackSwing be Used With 2017 Mercedes Sprinter?Sure, the Yakima BikeSwing # Y02483 can be used on a 2017 Mercedes Sprinter van. It is not a vehicle-specific part, so as long as your '17 Sprinter has a 2" hitch it will work just fine.
view full answer... - Compatibility of Spare Tire Carrier and Yakima Backswing Adapter on Hymer Activ 2.0 MotorhomeThe Front Mounted Trailer Hitch Universal Spare Tire Carrier # 6715 will work with the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches # Y02483 as long as you don't exceed the 100 weight capacity of the tire carrier. This will work on your Hymer Active 2.0 motorhome built on the Ram Promaster Chassis.
view full answer... - Using the Yakima BackSwing on a 2006 Dodge Sprinter RV Conversion with Softride Versa 2 RackThe Yakima BackSwing # Y02483 is a great add-on for allowing your standard platform rack to transform into a swing away rack, however it is not compatible with 1-1/4" hitch shanks or shanks that allow for an adapter to go up to 2"; for that reason, it would not be an option for you to use with your Softride Versa unless you have the version that was specifically made for use with a 2" hitch receiver. If you don't have the 2" version and you'd like to upgrade to a swing away platform...
view full answer... - Rear Door Clearances When Using Yakima BackSwing Swing Away Hitch ExtenderThe Yakima BackSwing # Y02483 is 41 inches from hitch pin hole to the furthest point of the receiver tube when open. It is 31-1/2 inches from the hitch pin hole straight out to the inside edge of the receiver tube. It is 22-3/4 inches from inside edge to inside edge. I've attached a photo with these measurements to assist. It is 8-1/2 inches from the hitch pin to the back of the fixed side rail. I've also linked a video with more dimensions to assist. You will need to make some...
view full answer...![Image 1 for]()
- Can the Yakima BackSwing Swing Away Hitch Extender Be Used On the Back Of a ToadYes, the Yakima BackSwing Swing Away Hitch Extender part # Y02483 can be used on the back of a toad vehicle therefore this is what I recommend you use.
view full answer... - Swing Away Hitch Extender for 1Up Bike RackI reached out to a representative of Yakima who said that the Yakima BackSwing Swing Away Hitch Extender # Y02483 had a receiver that had a depth of 8 inches and was 2-1/2 inches from the edge of the receiver to the center of the hitch pin hole. The accompanying diagrams show measurements of the Yakima BackSwing # Y02483. I have added a link to a video review of this swing away extenders for you to check out as well.
view full answer...![Image 1 for]()
- Solution for Kuat Pivot that Lines up with Rear Exhaust on 2015 Lexus GX 460It is definitely possible that the Yakima BackSwing Swing Away Hitch Extender # Y02483 referenced in your question will line up with the rear exhaust on your 2015 Lexus GX 460 when in its folded position. Based on the trailer hitches we have installed on the vehicle, at least a portion of the extender will be exposed to its heat. Over time, the heat from the exhaust may cause some paint or finish issues on the extender. The best solution for this would be to simply add some exhaust...
view full answer... - Will Yakima BackSwing Swing Away on 2018 Ram Promaster Allow Rear Doors to OpenFrom a previous customer we spoke with we found that on the Ram Promasters like your 2018 model the distance from the bottom of the hitch opening to the bottom of the door when swung out measures right at 9-1/4 inches. The Yakima Bikeswing Part # Y02483 when installed without a bike rack would allow your door to open then with a couple of inches of clearance.
view full answer... - Dimensions of Yakima BackSwing Swing-Away Hitch ExtenderI went out to our warehouse to measure the Yakima BackSwing Swing Away Hitch Extender # Y02483 and found it was approximately 4-3/4" from the top of the extension to the top of the assembly. Please keep in mind the BackSwing was not fully assembled when I measured so there may be a slight difference in this dimension when it is fully assembled.
view full answer...![Image 1 for]()
- Why Do Swinging Bike Racks All Swing Towards Passenger SideThe reason bike racks all swing to the driver side is because when people pull over on the side of the highway they almost always pull to the right side. So if you were on the side of the highway and needed to swing the bike rack out you wouldn't want to swing it out into traffic. That's why the bike rack manufacturers like Yakima make their pivots like the part # Y02483 swing to the passenger side.
view full answer... - Will the Thule Apex Bike Rack Work With The Yakima BackSwingWe have not physically tested the Thule Apex Bike Rack with the Yakima BackSwing Swing Away Hitch Extender part # Y02483 so I cannot confirm an exact fit but I do not see any apparent issue in doing so. However, the Yakima BackSwing will reduce your trailer hitch's weight capacity by 50% so you will need to keep this in mind while loading your bikes. If the weight of your bikes and bike rack exceeds 50% of the trailer hitch's tongue weight capacity then you may be interested in the...
view full answer... - Recommended Swing Away Hitch Extender Compatible with Cargo Carrier on Jeep Wrangler UnlimitedI have just what you need. I recommend the Yakima BackSwing # Y02483 which is rated for up to 250 lbs and will work well for your cargo carrier. It was created for bike racks, but you can use other accessories like a cargo carrier as long as you stay within the total weight capacity of 250 lbs which will include the aluminum cargo carrier weight and the Yeti cooler as well as everything in that cooler.
view full answer... - Will Yakima Backswing Swing Away Adapter Fit Other Brand Bike RacksYakima has stated that the Backswing part # Y02483 will fit basically all standard 2 inch hitch bike racks and cargo carriers so it would work well with either rack you mentioned. Check out the review video I attached for this as well.
view full answer... - Best Swing Out Hitch Adapter For Cargo Carrier and Kuat Bike RackAll of our Pivot Swing Away Hitch Extenders swing away at 90 degree angle. I recommend the Yakima BackSwing part # Y02483 for your Kuat 2 Bike Rack because it is lighter and offers a higher rise shank then the other options. Any swing away extender cuts the tongue weight rating of the hitch on the Promaster Cargo Van in half because it creates an extra leverage point on the setup. The tongue weight includes the extender itself, the rack and the bikes. If you are using a cargo carrier the...
view full answer... - Will the Hollywood Racks Hitch Cargo Carrier Work With Yakima BackSwing Swing Away Hitch ExtenderThe 15x52 Hollywood Racks Hitch Cargo Carrier part # HR1485 will work with the Yakima BackSwing Swing Away Hitch Extender for Bike Racks part # Y02483 so you are good to go. The reference to adapters has to do with carriers which have a 1-1/4" shank and use an adapter to install inside a 2" hitch but the 15x52 Hollywood Racks Hitch Cargo Carrier has a 2" shank so there will be no issues.
view full answer... - Can the Yakima Backswing be Used with Other Hitch AdaptersThe Yakima BackSwing, part # Y02483, is essentially an adapter that gives a hitch mounted accessory the swinging feature. If you are to use a 1-1/4 to 2 inch expander, like part # 80303 which is also and adapter, you would be using two adapters which is never recommended.
view full answer... - Is Thule T2 Pro XT Bike Rack Compatible with Yakima BackSwing Swing Away Hitch ExtenderYes, you can use the Yakima BackSwing Swing Away Hitch Extender # Y02483 with the Thule T2 Pro XT whether it's the 2-Bike Version, Black # TH9034XT, or the 4-Bike Version, Black # TH9034XT-9036XT.
view full answer... - Rear Spare Wheel/Tire Carrier for 2017 Mercedes Sprinter 2500 that Allows Rear Door to OpenThe solution you came up with that uses the Yakima BackSwing Swing Away Hitch Extender # Y02483 and the Curt spare carrier # C31006 is a really creative and excellent option. This would allow you to carry the spare at the rear of your 2017 Mercedes Sprinter and will swing out and away from the vehicle when needed so that you have access to the rear door as needed. I attached review videos for both of these for you to check out as well. The Roadmaster solution would be too tall to allow...
view full answer... - Can the Yakima BackSwing Swing Away Hitch Extender Be Used with a Cargo CarrierYes, the Yakima BackSwing Swing Away Hitch Extender part # Y02483 can be used with the Reese Cargo Carrier part # 63153 or any cargo carrier for that matter so long as it has a 2" shank. However, using the Yakima BackSwing will reduce your hitch's tongue weight capacity by 50% so that is something you will need to keep in mind. The same can be said for pretty much any adapter/extender in regards to hitch mounted accessories. I have attached a photo of the swing away being used with...
view full answer...![Image 1 for]()
- How To Use Bike Rack That Hits Doors on Sprinter VanThe best and really only feasible solution to make a bike rack work on a Sprinter Van is to use a swing away adapter, the Yakima BackSwing Swing Away Hitch Extender part # Y02483 is the most cost effective one we offer. This will allow you to open then rear doors without hitting them on the rack.
view full answer...
Why etrailer.com?
At etrailer.com we guarantee:Highest quality hitch adapters for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate hitch adapter information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Test Fit:
Zack K
Video by:
Andrew K
Expert Research:
Jameson C
Updated by:
Daron K
Video Edited:
Zach D
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.