Curt Anti-Rattle Hitch Clamp for 2" Hitches
(207 reviews)
Price: $23.09
In Stock
Curt Anti-Rattle Hitch Clamp for 2" Hitches
Item # C27UR
Our Price: $23.09
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (207)
- Q & A (0)
- Photos
CURT Hitch Anti-Rattle - C27UR
- Fits 2 Inch Hitch
- Accessory Anti-Rattle
- Towing Anti-Rattle
- Standard Anti-Rattle
- CURT
- Clamp Style
- Steel
- Universal
Keep your ball mount, tow bar, bike rack, cargo carrier, or other hitch-mounted accessory stable and rattle-free with this easy-to-use clamp. No tools needed, just tighten the clamp with the built-in lever and then pop it down to secure.
Features:
- Anti-rattle clamp keeps hitch-mounted accessories stable and quiet
- Helps to reduce or eliminate wobble and sway within your hitch receiver
- Ideal for ball mounts, cargo carriers, bike racks, and other hitch-mounted accessories
- No-tool installation with easy-to-adjust lever
- Position clamp around collar of hitch and accessory shank
- Use built-in lever to crank clamp until tight
- Pop lever down to secure clamp in place
- Durable, high-strength steel and lightweight aluminum combine for maximum durability
- Clear finish provides corrosion resistance
- Limited lifetime warranty
Specs:
- Application: 2" x 2" hitch receivers
- Hitch receiver must have a ring or collar
- Overall dimensions: 4-1/2" wide x 4-3/4" tall
22325 Curt Anti-Rattle Hitch Clamp for 2" Receiver
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Curt Anti-Rattle Hitch Clamp for 2" Hitches - C27UR
Average Customer Rating: 4.2 out of 5 stars (207 Customer Reviews)
Keep your ball mount, tow bar, bike rack, cargo carrier, or other hitch-mounted accessory stable and rattle-free with this easy-to-use clamp. No tools needed, just tighten the clamp with the built-in lever and then pop it down to secure.by: Paul11/05/2022
Good design. Mounts much faster than my previous anti-rattle device which requires a wrench to tighten two bolts.
The downside is the design of the Genesis GV80 and trailer hitch prevents upright mounting of the clamp. There’s not enough clearance to operate the clamp. Simply inverting the clamp works but requires reaching underneath to dismount.
by: Darrell 07/26/2022
Easy installation just like demo.
Comments
The anti-rattle device was easy to install and works well. Keeps the rattle down even on bumpy roads.
Darrell P - 08/01/2023by: Kim 05/26/2023
My bike rack started to wobble a bit. This clamp stopped it like I had hoped. Well made.
by: Doug12/22/2022
It kinda works, but I not great. When you try and clamp it down it grinds aluminum to aluminum. So you have to try and lube the lever to the clamp. It really doesn’t keep the hitch from banging with a trailer on. It works great if it’s just the hitch and your on bumpy roads to keep it from rattling but not with a loaded trailer.
by: Kenneth04/12/2022
I purchased this device because it would be easy to transfer between vehicle's. It works fine for awhile, but becomes loose on long drives. Going to try adding a lock washer on the left side and see if that helps
by: Bob09/08/2023
Works ok, but I had to replace the nylon washer with a stainless one after the nylon failed.
by: James06/03/2022
Easier to use than the U-bolt with nuts. Otherwise, does the same thing. No rattles, no clanking, works good.
Comments
Worked well on my old truck Colorado but wont fit on the Tacomas receiver. Nothing wrong with it, just doesnt fit the Taco.
James - 06/04/2023by: Jerald02/08/2023
What more could I want? Great customer service, simple ordering process, shipped out fast, was supposed to arrive on Monday but instead arrived the previous Friday, and the product was exactly what I expected. And it it nice not to hear that hitch rattling! Thanks y’all.
by: Dennis08/11/2021
This Curt clamp works as advertised and after installing it upside down to clear the Canyon bumper cover, it was a cinch to adjust and provide anti-rattle protection for my hitch. It is very easy to install and tighten without the use of a single tool. Great product!
Comments
Great product that ends the dreaded hitch ball mount rattle. Heartily recommend as an inexpensive fix and it looks great while keeping things quiet.
Dennis - 08/15/2022by: Joseph08/15/2022
Didn't work great on my 2017 F350 while using a Weight Safe hitch. Just didn't fit great, too small even with a 2" reciever. Unit also deteriorated rather quickly and corroded quickly. I no longer use this and have switched brands.
Comments
I am sorry to hear that your item is not fitting your application. I have sent your information over to our customer service department for them to get into contact with you about getting this corrected.
-- 
Katrina B - 08/24/2022by: Jeff10/09/2022
I was hoping for a hitch clamp I could put on & take off without tools. This one had potential, but it would not lock tight enough. When I tried to tighten it, the plastic washer at the hinge point just bunched up and got mangled. It never would tighten enough and the bottom of the clamp wouldn't set properly. Disappointing. I had to go with my old one with washers & nuts using a wrench.
by: Dell02/07/2022
will not work well for a ram truck with standard bumper can't get it tight
Comments
I am happy to look into this for you. I wanted to ask if it was possible to send a picture of the clamp installed?
-- Jenny N - 02/15/2022I think that with your hitch tucked under the bumper that the u bolt style anti rattle device is not the best option. You might be able to turn it upside down and see if it tightens this way. If not then a sleeve style device like part # 325-GH-033
Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers
$31.89 would be the only option that I recommend.
-- Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers
$31.89 would be the only option that I recommend.
Jenny N - 02/16/2022by: CMB12/23/2022
Great Product. I have been using this for about a year towing my RV. It helped reduce the noise related to the hitch.
by: Bruce 07/01/2023
Works well and serves intended purpose. Initial set-up takes some time and patience, fairly easy thereafter. No tools required to install or remove. Appears to be well made.
by: Debbie09/17/2023
Very difficult to figure out. I'm still not there. Working on this still.
by: Ronald03/08/2023
This clamp works as it should. I have left it on permanently throughout the year and it still looks brand new. Great product.
by: Curtis06/15/2022
Not really a good solution for wobble.The reason this is low quality is due to the fact that the handle that is the leverage point to lock down the unit is made from lower quality metal and it actually bends when you try to lock down right. Anything less than making sure it's tight does not have an affect on the wobble that was created from my motorcycle carrier. I did end up giving this away and ordering a bolt down version instead of the cam style. It made significant improvements to the wobble.
Comments
For an alternate anti rattle that is more robust I would recommend part # RM-061
Roadmaster Quiet Hitch for 2" Trailer Hitches
$30.32 instead. It does bolt down like an u bolt does.
-- Roadmaster Quiet Hitch for 2" Trailer Hitches
$30.32 instead. It does bolt down like an u bolt does.
Jenny N - 06/20/2022by: Steve 07/23/2023
Have not yet needed this accessory. I have no rattle.
by: Aaron08/03/2023
This thing sucks. It won’t stay tight and lose a up.
by: Rick 12/28/2022
It works like it supposed to you. Once you get it set up on your hitch you don’t hear any more rattles.
by: Mr. Smith09/14/2022
I was attracted to this clamp as it didn't need a wrench to tighten it. One less tool to carry around. Unfortunately it's pretty fiddly to fit correctly. You have to tighten the nut by hand and the tighten the cam. Getting the nut tightened just right so you can the adjust the cam takes a while. Too tight and the cam bar wont close, too loose and it won't stay closed properly. In the end I had to use a wrench but as it's so fiddly I replaced it with a conventional one and now carry a wrench around. I persevered but laying under the truck trying to make it work was just not worth it.
by: Tony06/22/2022
This carrier was easy to assemble, though I did have to borrow a torque wrench. It seemed important to follow the mfg's spec on that to make sure it didn't rattle apart. It's very wide and when loaded with a matching 2' high cargo bag it obscures my Subaru Ascent tail lights some, so I ordered the light kit. Reasonable price, also easy to install and works fantastic. I've got over 5000 miles using it and zero issues. This is a huge addition to cargo capacity in this class of SUV (Ascents and Pilots) It's even a bigger difference on my neighbor's Highlander). Highly recommended.
by: Daniel12/05/2022
The bolt or U part was not as heavy duty as I expected. Thought it would have been like the one that came with the hitch
by: James01/11/2023
the very first time i used it the aluminum part broke.
by: Daniel02/24/2023
Poor design, difficult to tighten. Plastic washer smashes n squeezes out. Don’t recommend!
25
204
Show More Reviews
See what our Experts say about this CURT Hitch Anti-Rattle
- How To Determine Compatibility of Curt Anti-Rattle Hitch ClampThe Curt Anti-Rattle Hitch Clamp part # C27UR is compatible with any vehicle that 1) has a 2" x 2" receiver tube opening and 2) has a collar around the outside of the receiver tube opening. If your vehicle has both of these things then it should work well but Curt does not offer vehicle specific testing unfortunately. If you would like to send a photo of your hitch I would be glad to see if I can offer any further fit info.
view full answer... - Can Curt Anti-Rattle Hitch Clamp for 2" Hitches Remove without Removing Hitch AccessoryYes, if you wanted to remove the Curt Anti-Rattle Hitch Clamp for 2" Hitches # C27UR without having to remove the entire hitch accessory you can do so by just unthreading the bolt on the one side and the handle on the other and the u-bolt will slide off.
view full answer... - Is There a Replacement U-Bolt for the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch ReceiverI do have an option for you but we don't offer a replacement u-bolt for the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver part # RSCP. The item is honestly pretty cost effective from the go so even if it were available, a new u-bolt would run you just slightly less than a new assembly and this option gets you new nuts and plate. That said, I think now might be a good time to upgrade to a tool-less design, the Curt Anti-Rattle Hitch Clamp for 2" Hitches part # C27UR.
view full answer... - Easy to Install Brake Controller for Towing with 2019 Aluma 6812H Utility TrailerThe easiest brake controller for 3 different vehicles is the Curt Mobile Echo # C51180 which only needs to plug into an active 7-way and once synced to a smart phone is ready to tow with. If you needed to add brakes to your trailer as well I attached a help article that covers everything on how to do that.
view full answer... - Front Mount Trailer Hitch Receiver For a 2003 Ford E-450 RV Cutaway ChassisThe Curt Front Mount Trailer Hitch Receiver # 33055 is the part you are looking for to fit your 2003 Ford E-450 RV Cutaway chassis. I recommend using a etrailer Rubber Hitch Cover # 22282 to cut down on the whistle that often comes from having an open receiver tube. If you are using this for a carrier the Curt Anti-Rattle Hitch Clamp # C27UR will allow you to remove the excess play so your carrier isn't rattling around while you drive.
view full answer... - Is the 8K Capacity of the Curt Ball Mount 3" Rise/4" Drop for 2" Hitches for Both Rise and DropThe Curt Ball Mount for 2" Hitches part # C84WR has an 8,000 lb weight capacity which is for both rise and drop positions. In regards to fit, this will vary by receiver, some are tighter than others and some are looser. It comes down to both the hitch side and ball mount side. That said, if you're worried about rattle you can add an anti-rattle like the Curt Anti-Rattle Hitch Clamp for 2" Hitches part # C27UR.
view full answer... - Is Anti-Rattle Device Needed for Malone Axis Truck Bed and Roof Load ExtenderThe anti-rattle bracket that comes with the Malone Axis Truck Bed and Roof Load Extender # MPG907 isn't a necessity but it is good to have as it reduces the amount of movement you'll see with the extender so I definitely recommend using it. You can also swap it out for a tool-free anti-rattle device like the Curt # C27UR or Brophy # RHSB to help speed things up. Attached are some review videos for you to check out.
view full answer... - Compatibility of Curt 2" Anti-Rattle Clamp With Equal-i-zer Weight Distribution SystemYes, the Curt Anti-Rattle Hitch Clamp # C27UR will work with your Equal-i-zer Weight Distribution System # EQ37100ET in your 2" receiver as long as it has a collar on the end of the receiver. It is designed to work with both solid shanks like the one included with your Equal-i-zer and hollow shanks that some other manufacturers use.
view full answer... - How To Prevent A Bike Rack That Wobbles While DrivingSome wobble is unavoidable with bike racks like the Saris Superclamp # SA4025F. To help limit the wobble, you can use this anti rattle # C27UR. I've used it and it works really well especially for vertical movement. If you haven't already, double check all the bolts on the carrier and when you're tightening down the anti rattle bolt that comes with the rack be sure to wiggle the rack up and down when tightening it.
view full answer... - Can The etrailer Hitch Pin Alignment Collar Be Used With Anti-Rattle Locking DevicesNo, The etrailer Hitch Pin Alignment Collar # e98942 will does not work as an anti-rattle device. The Let's Go Aero # 63232 will work with The etrailer Hitch Pin Alignment Collar # e98942 (only for alligning the carrier) as long as your hitch mounted cargo tray has a hollow shank. The Aero anti rattle device pulls the shank against the inside wall of the hitch receiver using a spring block and tightened down bolt. This will not interfere at all with the etrailer collar. If you have a solid...
view full answer... - Is Stabilizing Strap Needed For Curt Hitch C13206 or Will Clamp be OkayThanks so much for your purchase, and I can tell you that the Curt Cam Buckle Stabilizing Strap # 18050 is not a requirement for use with the Curt Trailer Hitch Receiver # C13206. While Curt does recommend the use of the strap, it is not needed in order to maintain the warranty. A clamp is an excellent idea for stability, so definitely continue to use a clamp like the etrailer Anti-Rattle Hitch Stabilizer # e99007 or Curt Anti-Rattle Hitch Clamp # C27UR.
view full answer... - Using A Curt TruTrack Weight Distribution With Gen-Y Weight Distribution ShankYes, the Gen-Y Torsion Weight Distribution Shank # GY54FR can be mounted in either orientation to provide more rise or drop. It will have a gauge on both sides of the hitch so that you can uses in either orientation and clearly see the gauge. Your 2020 Artic Fox must have between 400lbs and 1,100lbs of tongue weight to properly operate the torsion hitch. Yes, your Curt TruTrack Weight Distribution System # C17500 will work with the Gen-Y weight distribution shank. It shares the same 1-1/4"...
view full answer...
- Trailer Hitch Receiver And Wiring For a 2011 BMW X3 28i xDriveTo go with the Curt Trailer Hitch Receiver # C13316 on your 2011 BMW X3 I recommend the Curt Powered Tail Light Converter # C59236. This powered converter will connect to the battery for the power that goes to the trailer lights. This will prevent the vehicle wiring from being overloaded due to the excess draw that a non powered converter will cause. The Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 is only designed to be used on Draw-Tite 2" Receivers. I have seen customer reviews...
view full answer... - Can The Reese RP45018 Extension Be Used To Flat Tow A Jeep Wrangler Behind A 2021 Ford F-350?As you Jeep Wrangler weighs 4,200 pounds and you will be using the Reese Titan Hitch Box Extension # RP45018 at the 41" length, there will be no issues using it on your 2021 Ford F-350. You are getting pretty close to the 5,000 pound max capacity though, so I do not recommend adding any extra weight to the Jeep when you are towing it. With that said, I do recommend a couple add on parts to go with this. The Curt # C87UR (for 2-1/2" hitch) and # C27UR (for 2" hitch) anti rattle devices...
view full answer... - Bike Rack Recommendations for 2 E-Bikes for a 2022 Mercedes Sprinter 3500 Leisure Travel Van RVWe have a solution for you that provides you with the license plate and tail light visibility you need. Judging by my available photos of your 2022 Mercedes Sprinter 3500 Leisure Travel Van, the license plate mounts right above the hitch receiver. With that location, the license plate will be blocked by a hitch-mounted bike rack. However, if you are worried about this, you can always use a PlateMate License Plate Holder # Y02713 and the Curt Auxiliary LED Indicator Lights # C53201. Both...
view full answer... - Recommended Hitch for 2022 Hyundai TucsonFor the 2022 Hyundai Tucson we have several options available and all are class III rated with a 2" receiver. I recommend the etrailer Trailer Hitch Receiver, # e38KR as it is equal in specs and quality to the other options but offered at a better price point. Most all manufacturers of bike racks, cargo carriers and other hitch mounted accessories are moving away from a 1-1/4" option and making all accessories fit the 2" receiver for uniformity. This provides ease of use for customers...
view full answer... - Extended Ball Mount For Towing an Enclosed Trailer Behind a MotorhomeI have a couple options for you as the Curt High-Low Adapter 45797 # C27KR is only designed to be used with tow bars when flat towing. The Curt Class III Ball Mount with 2-5/16" Ball # C45065 is only 9-1/4" long from the receiver hitch pin hole to the ball mount hole. The Curt Ball Mount # D-28 also has a 6" drop like the other Curt ball mount but this mount is 14-1/4" long from the receiver pin to ball mount hole. That would gain you 5 inches without using an adapter. The ball mount...
view full answer...
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-747-0401
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.