Anti-Rattle Hitch Pin for 2" Trailer Hitches
(95 reviews)
Price: $21.99
In Stock
Anti-Rattle Hitch Pin for 2" Trailer Hitches
Retail:$34.84
Our Price: $21.99
You Save: 37%
Orders above $50 qualify for Free Shipping
In Stock
Customers prefer these similar products
- All Info
- Reviews (95)
- Q & A (0)
- Photos
- Why etrailer?
Lets Go Aero Hitch Anti-Rattle
- Accessory Anti-Rattle
- Fits 2 Inch Hitch
- Standard Anti-Rattle
- Lets Go Aero
- Threaded Pin Style
- Universal
This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.
Features:
- Anti-rattle pin reduces play and vibration in the hitch connection
- Place block with spring inside ball mount or hitch accessory shank
- Insert pin through hitch pin hole and anti-rattle block with spring
- Tighten pin so ball mount or accessory is pulled tight against side of hitch receiver wall
- Sturdy steel construction
- Hitch pin can be turned into secure hitch lock with snap-on padlock (ACC3250 - sold separately)
Specs:
- Application: 2" x 2" trailer hitch receivers
- Ball mount or hitch accessory must have a hollow shank
- Pin diameter: 5/8"
Note: This device can only be used with hollow-shank ball mounts and hitch accessories.
The anti-rattle Silent Hitch Pin from Let's Go Aero takes the rattle and play out of the connection between your trailer hitch and your ball mount or hitch accessory. The unique design features a sturdy steel block with an attached spring that is designed to sit inside the shank of your hitch-mounted accessory.
Place the block inside your ball mount or hitch accessory and line up the hole in the block with the pin hole in your ball mount. Slide your ball mount into your hitch and insert the hitch pin. To activate the anti-rattle device, just tighten the pin. Doing this will pull the accessory up against the wall of your hitch receiver, thus keeping the accessory from moving around inside your hitch. No more annoying clanking or vibrating.
SHP 359 Let's Go Aero Silent Hitch Pin Antirattle Device for 2" Trailer Hitches
Replaces SHP 2061
Item # SHP2061
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Missing parts
Customer Reviews
Anti-Rattle Hitch Pin for 2" Trailer Hitches - SHP2061
Average Customer Rating: 4.9 out of 5 stars (95 Customer Reviews)
This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.by: Mike 11/03/2021
Works well, no more rattle from the receiver hitch
Comments
Works well, no issues
Mike - 11/04/2022by: Ila R.07/12/2017
I have a double hitch installed on the back of my Class C motorhome. The top hitch is for my bike rack and the bottom hitch is for my Blue Ox to tow my car. The entire assembly was VERY loose with A LOT of play. I installed the 2 Roadmaster Quiet Hitch anti-sway rings on the two bottom receivers which had the lips around the receiver. The top hitch did not have the lip so I installed the Silent Hitch Pin in it. All the hitches now have no movements at all and I am so happy with my purchases! I am a single traveling lady and if I can do it, so can you! Thanks etrailer for your great parts!
by: Cory08/30/2021
I love these anti-rattle hitch pins. Easy to use and very secure. I usually lockable ones but went with the non-lockable due to price.
by: Doug05/17/2022
I still have to look at it each time I use it to figure out why it works, but it does exactly what it claims. The entire hitch is rock solid once this is installed.
by: Robert04/12/2022
We bought the anti-rattle hitch to tighten the connection between our van's 2" hitch and our hitch reducer, which brings the opening down to 1.25" to fit our car's Thule bike rack. The connection was a little too loose for us to feel comfortable toting our bikes cross-country. Joanne suggested this product, and it saved us the money we would have spent buying a second bike rack for the van.
by: Ted 08/11/2022
Alex directed me to the right part for my hitch issue. I received the part in 3 days. Great service!
by: William 10/22/2021
ABSOLUTELY NECESSARY!! Without this Anti-Rattle pin, my bike rack rocks back & forth on the hitch whenever I go over a bump in the road, A LOT!!! With the pin, everything is secure and steady!!
by: Larry06/09/2022
Great product...need to get another one for the other hitch!
by: AndyG01/07/2022
Installed a year ago and has worked great! Carry 250 lb. scooter on RV full time, rack still tight and haven't had to do anything to it. Would definitely recommend and would purchase again.
by: Robert10/14/2022
It is Excellent I wish I had picked this first
by: Frank 12/16/2021
Installed with my cargo carrier. No more rattle and kept the carrier straight
by: Ron H08/09/2019
Very satisfied with this product. I like the hitch hauler to be stable and not rattle all of the time.
Comments
It still works fine, no problems. Would recommend it if people want their hauler stay stable.
Ron H - 08/10/2020by: Robert 10/05/2022
Works great
by: Rick 01/26/2022
I always find what I need at eTrailer. Helpful service and fast delivery.
by: Charles C03/08/2017
I'll simply say this about these anti rattle hitch pins. If you ever try one, you'll never use a regular hitch pin again. These things really take a lot of noise out of your head when you're pulling a trailer. I like them so well, I've recently purchased more of them as gifts for friends and family members that have trailer hitches.
Comments
Yes, even after one year of owning it, I feel that product is a must have for anyone using a trailer hitch. Ive recommended them to friends and family. And thats coming from a very frugal spender.
Charles C - 03/11/2018by: Jerry L08/03/2019
This product is still going strong. I purchased a cheaper model for another hitch product and regretted doing so. This stays in place so pin lineup is perfect every time.
Comments
This is still working out well. As I said a year ago dont go cheap. I have several hitch setups for bikes and motorcycles and the setup with this product I never have issues lining up.
Jerry L - 08/04/2020by: Jerry 11/07/2021
This is the best anti rattle pin. always stays in place.
by: Darryl D02/25/2015
I was sick of the noise that the hitch made every time I drove over a pothole, speed bump etc so purchased one of the Anti-Rattle Hitch Pins from eTrailer - I should have done this years ago. The Pin works as advertised plus the service from Tommy was first class, as always!!
Comments
After a year, still as good as on day one and still five stars!
Darryl D - 02/25/2016by: Carlo P08/07/2017
Flawless.... a perfect fix to stabilize my hitch steps to my camper. Steps do not wobble any more. Easy to install and remove, highly recommend this product...could not be happier!!! thank you
Comments
Year later, just as happy with this product.
Carlo P - 08/07/2018by: Steve 08/25/2022
Just what I expected
by: Lynn10/07/2021
Using as anti sway device to take side play out of hitch and receiver assy.
by: Eryn07/29/2019
This cargo carrier was amazing on our trip to the beach. With the anti-rattle hitch pin you couldn't even tell it was back there. The only slight problem is that the clearance with it on our 2019 RAV4 wasn't great. We had a little trouble getting in and out of driveways, but we made it work. Customer service at etrailer.com was super. The agent helped me pick all the parts based on my needs and they worked perfectly. I will definitely return to the site when I have other auto needs.
by: Louis03/21/2022
It does the job it was designed to do. I am satisfied.
by: Keith12/12/2018
Does the job. No rattle or sway with my cargo carrier. There's a locking cap that can be used in place of the safety clip. I wish it had been a suggested purchase when checking out. However, since you can torque this thing down tight, a thief would have to be walking around with a 3/4" wrench to get it off.
by: Jsw07/09/2020
I bought two of these to use with my Extend-A-Bed (t-post for truck). Since I need two (one at my truck receiver and one at the joint of the Extend-A-Bed), I wanted one of the less expensive options that etrailer has for sale. I am very satisfied with the product. It holds my bed extender securely and keeps it from rattling.
25
95
Show More Reviews
See what our Experts say about this Lets Go Aero Hitch Anti-Rattle
- Anti-Rattle Device Recommendation for Use with MaxxHaul Carrier MT70106What you would want is an anti-rattle device like the part # SHP2061 which will install in the shank of the MT70106 and will take out the movement. I attached a review video for this for you to check out as well.
view full answer... - Can the Lets Go Aero Anti-Rattle Hitch Pin be Used with Tow BarThe Let's Go Aero Anti-Rattle Hitch Pin # SHP2061 that you referenced will work well for your with your tow bar to flat tow your Jeep. Your tow bar will need to have a hollow shank in order for the anti-rattle pin to work properly. I have attached a review video of this hitch pin for you. The # SHP2061 will work great to tow the weight of your Jeep. The hitch pin is designed to work with all Class III towing applications and has a weight capacity that exceeds the weight of your vehicle....
view full answer... - Will the Lets Go Aero Anti-Rattle Device # SHP2061 Work w/ a 2 inch Hitch ExtensionYes, the Let's Go Aero Anti-Rattle Hitch Pin, # SHP2061, will prevent the extension from rattling inside the 2 inch hitch, as long as the extender you are using is hollow. Please note, that when using an extension, the tongue weight capacity of the hitch is reduced by 50 percent so the total weight of the bike rack and the bikes on it must be less than 50 percent of the tongue weight capacity that's listed on the identification sticker affixed to the hitch.
view full answer... - Is Sleeve Included with Let's Go Aero Anti-Rattle Hitch PinThe sleeve you point out in the picture of the Let's Go Aero anti-rattle hitch pin, part # SHP2061, is included. The smooth part of the pin has a smaller diameter than the threaded part and that sleeve takes up the gap in the pin hole. Yes, you can use this pin to tow your trailer as long as the ball mount has a hollow shank.
view full answer...
- Does Anti-Rattle Hitch Pin # SHP2061 Come with BushingThe bushing you mentioned in the product picture for the Anti-Rattle Hitch Pin # SHP2061 that you referenced does come with the kit. The video is older shows an older version of this part number that did not include this. It's in the process of being reshot (as of August 2018).
view full answer... - Shear Strength of Anti-Rattle Hitch Pin for 2" Trailer HitchesThe Anti-Rattle Hitch Pin for 2" Trailer Hitches part # SHP2061 doesn't have a weight rating provided by Let's Go Aero. However, its a 5/8" bolt so you can estimate it to be between 70,000 and 90,000 lbs.
view full answer... - Recommended Anti-Rattle Hitch Pins For 2015 Chevrolet TahoeWe have a couple of options for anti-rattle devices that will work for your 2015 Tahoe. If you have some room on the side of your trailer hitch I recommend the Lets Go Aero Hitch Locks, part # 63232. This is used in place of the standard pin and clip. This has a barrel-style lock and comes with 2 keys. These hitch locks do require a hollow shank. For a non-locking anti-rattle hitch pin I recommend part # SHP2061.
view full answer... - Anti-Rattle hitch Pin that Can be Used to Tow a TrailerWhen towing a trailer you can use the Let's Go Aero anti-rattle hitch lock, # SHP2061. You can use # SHP2061 even if the pin does not go all the way through the shank. The clip is just a fail safe. Provided the pin is properly tightened down then the lock washer will provide tension to keep the bolt from backing out. The pin, if threaded all the way in, measures 4-1/2 inches from the outside of one pin hole to the tip of the pin. It is 3-3/4 inches to the notch for the clip so it would...
view full answer... - Anti-Rattle Hitch Pin for a 2-1/2 Inch Trailer Hitch Using a Reducer SleeveFor the 2-1/2 inch trailer hitch using a reducer sleeve you will need an anti-rattle device with a longer pin to compensate for the wider hitch. I recommend the XL device # SHP2040-XL. It functions as anti-rattle devices and locks.
view full answer... - Anti-Rattle Hitch Lock for 2016 Toyota Tundra with Wider Hitch TubeFor an anti rattle hitch lock to fit the wider hitch on your 2016 Toyota Tundra the best option is the Anti-Rattle Trailer Hitch Lock # 63232 which has a usable span of 3-1/2 inches or even the # SHP2040-XL for a 3-7/8inch span. I attached a review video of these for you to check out as well.
view full answer... - Replacement Lock for Let's Go Aero # SHP2061 Anti-Rattle Hitch PinThe # SHP2061 does have a replacement lock available, it is part # ACC3250.
view full answer... - Recommended Options To Fix Loose 2-Inch Ball Mount on 2017 Dodge DurangoWe have a few options that help fix a loose ball mount on your 2017 Durango. First, check out the Anti-Rattle Hitch Pin, part # SHP2061. This pin reduces any movement or vibration between your hitch and hollow shank ball mount. Another option is the Roadmaster Quiet Hitch, part # RM-061, helps eliminate rattle and sway within your hitch receiver.
view full answer... - Lock Recommendation for Anti-Rattle Bolt of Reese Eclipse Bike Rack 63124For a snap on pad lock that you can add to the anti-rattle bolt of your Reese Eclipse bike rack part # 63124 you would want the part # ACC3250. This has been confirmed as a fit for your bike rack and would work well. You will also need the part # SHP2061 with the lock.
view full answer... - Does the Anti-Rattle Hitch Pin # SHP2061 Fit the Snap-On Lock # ACC3250Yes, the Anti-Rattle Hitch Pin # SHP2061 is compatible with the Snap-On Lock # ACC3250 that you have in your order.
view full answer... - Options on How to Fix Loose Ball MountI have just the thing to fix a loose ball mount or drawbar. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount.
view full answer... - Difference between Lets Go Aero Anti-Rattle Hitch Pin SHP2061 and SHP359This is the Lets Go Aero Anti-Rattle Hitch Pin for 2" Trailer Hitches # SHP2061. We do not offer SHP359 but it is a similar design. You are correct the main difference between the two is that # SHP2061 includes the pin sleeve that helps reduce the space between the pin and hitch pin hole. This Anti-Rattle device will take out a majority of the movement in your hitch mounted accessory. I feel that it's most effective when used with bike racks and cargo carriers but still works great with...
view full answer... - Recommended Cable Lock For Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike RackWe do not offer a lock that will work with the 5/8 anti-rattle bolt that came with your Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack. Since the bike rack shank has proprietary threads, a standard non-threaded hitch pin like part # SHP2061 and # ACC3250 lock will not work. I recommend using a cable lock like part # e98891. You would just route the cable through the bike frames and then thread the cable through the safety chain loops on your trailer hitch.
view full answer... - Options on How to Fix a Loose 2 Inch Ball MountI have a couple different options on ways to fix a loose ball mount. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # MPG908, will take up play and eliminate rattle. The Roadmaster Quiet Hitch, # RM-061, helps eliminate rattle and sway within your hitch receiver.
view full answer... - Replacement Universal Anti-Rattle Hitch Pin for BV BV Bike RackWe don't carry BV products, so I couldn't say if any of the bike rack threaded hitch pins we offer would be a compatible replacement. If your rack has a 2 inch hollow shank and doesn't use an adapter, a universal option like # SHP2061 would be a likely replacement. You'd need to remove the threaded block from the inside of the shank of the rack and replace it with the one included with the # SHP2061. If you have a 1-1/4 inch hollow shank, the # F-315 would be a possibility. Once again,...
view full answer... - Anti-Rattle Hitch Pin Needed with a 5/8" DiameterI have the perfect alternative for you! The Let's Go Aero Anti-Rattle Hitch Pin # SHP2061 is for accessories and ball mounts that fit a 2" receiver and have a hollow shank. The block goes inside the shank of your accessory and the threaded pin pulls it in to the side of the receiver to help eliminate movement. The pin has a 5/8" diameter like what you are looking for. This comes with just a clip but you can add the padlock # ACC3250 if you want more security. A demonstration video has...
view full answer... - Replacement Anti-Rattle Trailer Hitch Pin for Bell Hitchbiker 2 Bike RackWe don't have a confirmed fit for a Bell bike rack. Based on the information your gave, I recommend the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks # S64027. If you don't want the lock, then you can use # P5901. These pins are 5/8 inches diameter. The bike rack manufacturers all use different threads, but your rack looks very similar to the Swagman Trailhead fixed base rack. if that doesn't fit your rack, you may want to consider drilling out the threaded...
view full answer... - How to Prevent a 12 Inch Receiver Hitch Extension From Rattling in ReceiverAdding an extension introduces another component in between the receiver and the ballmount or hitch accessory. Because of this, getting a certain amount of wobble is unavoidable. If you're using the extension for a hitch mounted accessory, you can use an anti-rattle device like part # BX88224. However, keep in mind that using an extender will lower the tongue weight capacity of your hitch by 50 percent. If you'll be towing, you'd be better off using a longer ball mount, if the longer...
view full answer... - Best Way to Use a Kuat Sherpa 2.0 Bike Rack on a 2" and a 1-1/4" ReceiverWe have 2" to 1-1/4" receiver adapters that you can use on your 2020 Toyota RAV4. As you said, the Kuat Sherpa 2.0, part # SH12P, fits a 1-1/4" receiver and can be used with the Kuat Adapter, part # D101, to fit a 2" receiver. However, if you're looking to switch between these two often, then a better option is to use a hitch adapter rather than the bike rack's shank adapter. The Brophy Reducer, part # HT02, is exactly what you're looking for. This can be inserted into a 2" receiver and...
view full answer... - What do You Recommend to Transport a 24 x 48 260 Pound Object on a Flat-Towed 2014 Grand Cherokee?The only option we currently have that will give you the 24 x 48 inches of space you need as well as the safety, I recommend the GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out item # HGK819 (dark grey) or item # HGK826 (light grey). With the GearSpace 34, it has internal dimensions of 63" long x 28" wide x 40" tall. Also, the GearSpace 34 has been constructed to withstand the added torque and force when mounted on a hitch receiver on a flat-towed vehicle. Almost all of our...
view full answer...
Do you have a question about this Hitch Anti-Rattle?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate hitch anti-rattle information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Andrew K
Written by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Matthew S
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-833-496-1390
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.