bing tracking image
  1. Hitch Cargo Carrier
  2. CURT
  3. Flat Carrier
  4. Fixed Carrier
  5. Fits 1-1/4 Inch Hitch
  6. Fits 2 Inch Hitch
  7. Fits 1-1/4 and 2 Inch Hitch
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs

19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs

Item # C18110
lowest price pledge
Our Price: $160.17
You Save: $8.29
Hitch Cargo Carrier
This item qualifies for Free Shipping
Shipping Weight: 30 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Sturdy, carbide black powder coated carrier holds wet or messy cargo you don't want inside your car. Sidewalls have tie-down points to secure your gear. Hitch bolt and clip included. 1-800-940-8924 to order CURT hitch cargo carrier part number C18110 or order online at Free expert support on all CURT products. Guaranteed Lowest Price and Fastest Shipping for 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs. Hitch Cargo Carrier reviews from real customers.
  • All Info
  • Reviews (204)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Hitch Cargo Carrier - C18110

  • Flat Carrier
  • Fixed Carrier
  • Fits 1-1/4 Inch Hitch
  • Fits 2 Inch Hitch
  • Fits 1-1/4 and 2 Inch Hitch
  • 48 Inch Long
  • 20 Inch Wide
  • Steel
  • Class I
  • Class II
  • Class III
  • Class IV
  • CURT
  • Standard Duty

Sturdy, carbide black powder coated carrier holds wet or messy cargo you don't want inside your car. Sidewalls have tie-down points to secure your gear. Hitch bolt and clip included.


  • Hitch-mounted cargo carrier lets you tote extra gear
    • Frees up space inside your car for passengers and pets
    • Keeps wet and muddy items from dirtying up the interior of your vehicle
  • Angled shank elevates platform for better ground clearance and easier loading
  • Pre-drilled holes along the sidewalls offer tie-down points
  • Mesh floor is easy to clean
  • Shank adapter enables carrier to fit both 1-1/4" and 2" hitches
  • Rugged steel construction
  • Corrosion-resistant carbide black powder coated finish
  • Bolt-together assembly
    • Hitch bolt and clip included


  • Application:
    • 1-1/4" x 1-1/4" Trailer hitch receivers (Class I and Class II)
    • 2" x 2" Trailer hitch receivers
  • Weight capacity: 300 lbs
  • Outside dimensions: 47-3/4" long x 19-11/16" wide x 2-11/16" tall
  • Inside dimensions: 47-11/16" long x 19-1/2" wide x 2-9/16" deep
  • Side rails height: 2-3/4"
  • Shank rise: 3-3/4"
  • Carrier weight: 30 lbs
  • Measurement from center of hitch pin hole to closest edge of carrier: 11-1/8"
  • Measurement from center of hitch pin hole to beginning of rise of shank: 6-3/4"
  • 1-Year limited warranty

18110 Curt 20x48 Hitch Cargo Carrier - 1.25 Inch Hitches and 2 Inch Hitches - Black Powder Coated Steel - 300 lbs

Replaces 18140

Installation Details C18110 Installation instructions

Customer Reviews

19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs - C18110

Average Customer Rating:  4.7 out of 5 stars   (204 Customer Reviews)

Sturdy, carbide black powder coated carrier holds wet or messy cargo you don't want inside your car. Sidewalls have tie-down points to secure your gear. Hitch bolt and clip included.


A must-have for anyone that owns a small car and likes to go on weekend camping trips! OR anything you can imagine (that doesn't exceed weight limits). It took around an hour to assemble.


I bought this for my Pontiac Vibe and love it! It's really easy to put on and take off. It also easily adapts to a 2" hitch for my wife's Subaru. I recently used it to pickup some snow tires/rims I bought on facebook. When not in use, it leans against the wall in my garage, out of the way. This is way easier than a roof top carrier. Plus, it's quieter and doesn't kill your MPG.

Well the plastic 2 adapter broke the first time I used it. Curt says that part is not covered by warranty. Luckily, its still usable. I just tape or glue it back together each time I use it. Eventually, Ill get a bigger rack for my wifes car.
Chris - 03/17/2022


I used in conjunction with a hitch cargo carrier. It dramatically increased my ability to carry camping gear, or carry luggage when all the passenger seats are full. What is better, it doesn’t reduce your gas mileage as much as a roof box because it is within the streamline of your car, and doesn’t increase aerodynamic drag.


This cargo carrier is sturdy and works well on a Mazdaspeed 3. The rise and slight angle make it so clearance is not an issue. The carrier is very easy to put together. I did install the 8 bolts through the connecting plates in reverse of the instructions so cargo would not be scratched or torn. It adds so much cargo space for our growing family. The only drawbacks are a lack of license plate frame and reflectors which are easily added with very little cost. I used a Cruiser license mount plate with zip ties and Reese DOT approved reflectors. I don't plan to use the carrier at night but there are many license plate lights that can be added as well. I also purchased the Rola carrier bag for hauling luggage and other indoor items.


This cargo carrier worked great. Used it to move a rototiller, 2 hour trip. No damage or deformation to the carrier despite the tiller being near the top of the weight limit. The hitch bolt held the carrier firmly in place. It doesn't come with the lights, I installed light kit Item # 52014. Just had to drill four small holes (I knew this light kit wasn't specifically designed for this carrier, just wanted something cheap). Works great on a Town Car, lots of ground clearance. I'm very happy with this product.


Exact fit for the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # 24884. Easy to assemble. Sturdy and well built carrier. I would suggest a LED Trailer License Plate Light w/ Bracket because the carrier will block the plate and light, as shown in the photo submitted.


We recently bought a slightly used car with a 1 1/4 hitch already installed. This hitch gives us the flexibility to go on my wife car with the 1 1/4 hitch, or my car with the 2" hitch. We love having this rear platform to haul bulky items from our home in CT to my son's home in Chicago. It stands up to lots of weight, and offers a more aerodynamic option to a pod on the roof. Love! Item came quickly! Reasonable price! What's not to love?

Excellent product! Get this. I hauled a snowblower from Connecticut to Chicago with it! I haul my lawnmower to my rental house and use it to help move my daughter
Richard - 10/29/2021


Etrailer provided excellent service and was great at recommending this cargo carrier.

This cargo carrier was perfect for my 2011 Toyota Corolla with a 1 1/4 hitch. This cargo carrier not only fits without an adapter (much safer and can carry the load better), but it also is elevated over the hitch by another 4-5 inches to give greater clearance and it moves the cargo carrier away from the exhaust pipe. I worried about the heat from the exhaust pipe previously.

This was easy to assemble and install (about 30 minutes). About 6 main parts + some bolts. Easy to install. I'm going to use this for a cross country road trip.


I like the design, although it would be nice if you would have the same size in a aluminum material for a inch and a 1/4 hitch? Maybe build most in aluminum "but" have the receiver bar metal?

Thanks for the review! I just wanted to suggest a few cargo carriers that may suit you, depending on your application. There are two aluminum carriers but they fit a two inch hitch instead of your preferred one and a quarter inch. They are part # MT70422
21x48 MaxxTow Cargo Carrier for 2" Hitches - Aluminum - 500 lbs
and part # MT70108
20x47 MaxxTow Cargo Carrier for 2" Hitches - Aluminum - 500 lbs
. Hopefully this helps!
-- Etrailer Expert Brooke M - 07/09/2021


The Curt Cargo Carrier was exactly what I needed. It fir perfectly, was easy to assemble and is very solid. Hauled items for a 12 hour trip with any issues. Etrailer shipped it same day and I received two days earlier than predicted. I also ordered a Curt trailer hitch from etrailer that was easy to attach to my vehicle. Great job Etrailer for providing such a good product.


This did great on a 5500 mile roadtrip and 150lbs of camping equipment. It held up well and the raised hitch made it nice for the steep inclines on trails so there was clearance. I did add amber reflectors on the side and red on the back from walmart for extra visibility.


I just assembled and installed my new 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches on my 2013 kia soul. Was easy to assemble and i am impressed with how solid it is once installed in hitch no wobble or movement. I plan on using this for hunting hauling muddy boots and gear will free up a lot of space inside of my kia. I will also use to haul gas jugs to refill.


Product came with clear directions to assemble. Seems to be of good quality. Was hoping it would be made in the USA (did not check) like the Curt hitch I bought, but it was not. Not the end of the world. Only reason I am taking it down a notch is the mesh metal in the center bends a bit, not much but with ~155 lbs. on it I can get it to bend. But I will never have more than ~250 on it so it will work. Good for the price.


I wanted to let you know that both the hitch and carrier arrived and I have already installed them both. They are awesome! Shipping was fast and the box arrived in great condition.

The video you have on your site helped out tremendously. I didn't have the use of a lift, but had a jack and two jack stands. It was a little difficult that way, but still doable.


This carrier came in real handy during a recent move. The larger items/boxes that we couldn't fit in our CR-V were easily strapped down on the carrier. While we were making relatively short trips to the new home, for longer / more numerous trips it would be wise to purchase a portable license tag holder since it doesn't take much on the carrier to block where the normal tag location is on the CR-V.


this is lite and strong. it fits my app lication

Its good solid unit. I attached a large plastic tool box and haul around 150 lbs of gear. I have traveled about 1000,000 miles since installation with no issues. I try not to exceed the weight limit on the receiver which is around 200lbs
Ruben - 09/09/2021


overall pretty good value. A bit on the flimsy side, but works well for light duty bulky stuff. I probably wouldn't put more than about 150 lbs on it, but I like to be well within the advertised limits of stuff like this. Assembly was quick and painless, nice anti rattle pin included and works well. I was looking for one that tilted down or swings away from the vehicle, but couldn't seem to find one that fit a 1-1/4" hitch. All in all it's a good product. Fast shipping from etrailer.


Cargo carrier #18110 installed on a 90 mazda miata. ROAD TRIP READY! Happy with the purchase! Thanks etrailers!


Went on vacation that included a drive over 300 miles. Had a 1-1/4 hitch installed on my Mazda CX 5. This cargo carrier stood up to the test with flying colours. The screw in bolt was just as tight when we finished the drive as it was when we started it. Added my own reflective stickers and used a tarp, bungees and ratchet straps to protect the cargo.


I just returned home from a beach trip with my new cargo carrier. Overall it performed as needed. Having installed this on my 2006 Toyota Corolla I am happy I purchased a carrier with a rise in the shaft (raises the platform approximately 3" above the hitch insert). The carrier lightly scraped the ground a couple of times when pulling out of steeper parking lots onto the main road. Assembly took about 45 minutes doing this alone. Make sure you follow the directions and don't tighten the bolts the entire way, but make sure you tighten them enough that the square part of the bolt head will not fall out of the square hole or you run the risk of not being able to properly seat the bolts as you begin tightening all of the other bolts. I was slightly disappointed by the hitch pin. This does not use a standard slip through hitch pin and a standard pin will not fit. It instead has a threaded pin (included) that you need a 19mm socket (or box wrench) to tighten. I was hoping to use my Master Lock locking hitch pin, but was unable to because it was too large to fit through the threaded part of the carrier. There is a hole at the end of the threaded hit pin for a cotter pin so you may be able to put a small luggage zipper type lock in there for added security. The other disadvantage to the need for a socket is you need to take one with you on your trip if you plan to remove the cargo carrier, which I did for daily driving during the week around town. So again, overall it performed as needed and I would recommend this to a friend, but would make sure I pointed out the hitch pin setup as I don't think most people would expect this.

Its threaded so you dont have to watch your cargo bounce side to side and it makes for a quiter ride because the rack is on with the hitch. You can get a threaded hitch pin with lock too.
-- comment by: ty - 05/09/2015

The carrier has worked very well and I use it regularly. I recently purchased a new vehicle with a 2 receiver so it was nice to be able to just use the included adapter and not have to buy a new carrier. I mentioned the hitch pin as a downside, but after use it really is not. I purchased a cheap luggage lock to minimize the chance of theft. I also picked up a really cheap 19mm wrench to keep in the car so taking the hitch pin in and out is no problem. I would definitely recommend this product. It has held up very well despite my frequent, rough use.
Brandon M - 08/17/2015


Perfect. Took some finessing to tighten down the bolts but I did it on my own. I used it to move about 250lbs worth of belongings in containers from NY to FL (Little over 1,300 Miles).


Great carrier for hauling some extra camping gear. Only complaint is it sits pretty low if you’re driving a sedan. As far as the product, perfect for what we needed.


Used to transport a 65lb electric bicyc le


I am so glad I ordered my cargo carrier from E-trailer.The package arrived on time and was exactly what I was looking for in a cargo carrier.I liked the easy to follow instructions as it only took 40 minutes to put together. This is my first order from E-trailer and I would not hesitate to order something again.The good service and quality products have given me peace of mind for my next order. Thanks E-trailer!!

I mount my carrier on my Toyota Avalon and it works very good for when Im hunting,fishing and camping.The extra space allows for easy packing of my gear without damaging my nice car. I am very satisfied with this product.
Jason P - 11/20/2017


Was very easy to assemble. It will add to my cargo capacity in the near future as I move back to Texas.

Only used it for my move to Texas, worked as expected. No problems.
Phillip - 10/07/2021
Show More Reviews

Ask the Experts about this CURT Hitch Cargo Carrier

  • Can Rear Door on 2008 Honda Odyssey be Opened with Loaded Trailer Hitch Mount Cargo Carrier
    Curt trailer hitch mount cargo carrier # C18110 measures 6-3/4 inches from the center of the hitch pin hole to the nearest edge of the carrier. And there is a rise in the shank of 3-3/4 inches. If you measures from the center of your hitch pin hole out 6-3/4 inches and then up 3-3/4 inches (measured from the top of the receiver opening) this is approximately where the nearest edge of the carrier floor will be. If you can tell me if you have a 1-1/4 inch or 2 inch trailer hitch I can make...
    view full answer...
  • Can a Curt Fixed Trailer hitch Mount Cargo Carrier be Used on the Back of an RV
    Yes, you can use Curt trailer hitch mount cargo carrier # C18110 on the back of an RV. You will want to avoid models that fold up because folding models have additional points of movements that could possibly fail due to the increased stress associated with being at the back of an RV.
    view full answer...
  • 2011 Toyota 4Runner Cargo Carrier Recommendation
    As long as you have a trailer hitch installed on your 2011 Toyota 4Runner the 20x48 Curt Cargo Carrier # C18110 should work well as it can fit 2 inch or 1-1/4 inch hitch openings. I attached a review video for the carrier as well.
    view full answer...
  • Interior Dimensions of the Curt Trailer Hitch Mount Cargo Carrier 18110
    The specs section on the page for Curt trailer hitch mount cargo carrier # C18110 contain both the overall and inside dimensions of the carrier. The inside dimensions are: 47-11/16" long x 19-1/2" wide. The overall outside dimensions are: 47-3/4" long x 19-11/16" wide. It sounds like you might have something to carry that is close to the size of the carrier. I will be happy to make a recommendation if there is something available that will work with the dimensions you need.
    view full answer...
  • Hitch Mounted Cargo Carrier with Rise Recommendation for a 2002 Mazda Miata
    Since there are no folding hitch mounted cargo carriers that will fit a 1-1/4 inch hitch like what you have on your 2002 Mazda Miata your best option would be to go with the Curt Carrier, part # C18110, as it has a rise of 3-3/4 inches and would work well for you. I attached a review video for you to check out as well.
    view full answer...
  • How to Determine if a Rear Door Could be Opened with Curt Cargo Carrier C18110 Installed
    The Curt Cargo Carrier part # C18110 has a rise of 3-3/4 inches built into the shank and the sides of the carrier are 2-3/4 inches. That means that if the bottom of your rear door is more than 6-1/2 inches above the top of your hitch opening then your rear door would open without interfering with the carrier. So you would need to run out to your vehicle and measure from the top of the hitch opening to the bottom of the door. If it's more than 6-1/2 inches you would be good to go.
    view full answer...
  • Inside Dimensions of the Curt Cargo Carrier part # C18110
    The inside dimensions of the tray on the Curt cargo carrier part # C18110 are 47-11/16" long x 19-1/2" wide. The side rails are 2-3/4 inches tall as well. You may be able to get the mower on the carrier as long as the deck of the mower sits higher than 2-3/4 inches in height. This will fit your 1-1/4 inch trailer hitch as well.
    view full answer...
  • Recommended Hitch Mount Cargo Carrier for 2015 Honda Pilot
    A great hitch mounted cargo carrier for your 2015 Honda Pilot is the 20x48 Curt Cargo Carrier # C18110. This carrier measures 20 x 48 inches and will hold up to 300 lbs. The shank has a 3-3/4 inch rise giving you ground clearance. It is made of steel and has a black powder coated, corrosion-resistant finish. I've attached a video of the carrier on a 2016 Pilot so you can get a idea of how it will look on your 2015.
    view full answer...
  • Availability of Hitch Cargo Carrier for a 2013 Hyundai Elantra
    We have cargo carriers that would work on your 2013 Hyundai Elantra GT, but since the hitch you would have installed would be a Class I hitch there are no folding options I can recommend. The Class I compatible carriers we offer like the part # C18110 do not fold up. Folding carriers tend to have a bit more movement which can be stressful on the lower capacity Class I hitches. Technically the cargo or the carrier should not block the license plate but in most cases people aren't given...
    view full answer...
  • Fixed Hitch Cargo Carriers for 2-Inch Hitches
    Hitch accessories that will be used on the back of a motorhome, trailer or other RV have to be built for that specific application. The reason is that there is much more motion at the rear of a motorhome than at the rear of a car due to the greater distance from the rear axle to the hitch. On a car this might be 2-feet or so but on a motorhome it could be 5 or 6 feet. This extra distance translates into much more lateral and vertical motion and mechanical stress on both the hitch and...
    view full answer...
  • Will Curt Cargo Carrier # C18110 Interfere with Exhaust on 2012 VW GTI
    The Curt 19x47 Cargo Carrier # C18110 referenced in your question does feature a 3-3/4 inch rise on the shank which should elevate the platform above the exhaust on your 2012 VW GTI. Since the hitch receiver for your GTI is tucked right up underneath the exhaust the shank rise along with the carrier's 2-3/4 inch tall side rails will be enough to protect your loaded cargo from the exhaust's output during travel. This is a really nice carrier that features a 300 pound weight capacity and...
    view full answer...
  • How to Install 19x47 Curt Cargo Carrier in a 1-1/4 inch Trailer Hitch Receiver
    To properly install the 19x47 Curt Cargo Carrier # C18110 into either a 1-1/4" or a 2" hitch receiver you need to tighten the anti-rattle bolt down until the lock washer sets in place. From the photo you sent in it looks like you actually just need to tighten the anti-rattle bolt down a bit more. Once the lock washer is properly seated the bolt won't move at all and the hitch pin is just there for some extra security. You can see an example of this in the attached review video starting...
    view full answer...
    Image 1 for
  • Can I Use the Curt Cargo Carrier on a John Deere Gator?
    Yes. The Curt 19" x 47" Cargo Carrier # C18110 will fit in the 1-1/4" hitch receiver on your John Deere TX Gator, but you'll need to verify the tongue weight capacity on that hitch when attached to your Gator to determine how much weight it will actually carry. On a standard vehicle with a Class I hitch receiver, the Curt # C18110 has a 300-lb capacity, so you'll want to consult your owner's manual to determine what the tongue weight capacity for a hitch on your Gator is capable of carrying.
    view full answer...
  • Which Curt Cargo Carrier Fit 2021 Toyota Venza With Activity Hitch?
    In order to verify if the 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches # C18110 will fit your 2021 Toyota Venza with activity hitch, you will need to take a few measurements. Measure from the receiver's hitch pin hole to the rearmost part of your bumper to determine how much clearance you need out of a hitch accessory. Then you can compare your measurements to the attached photo which illustrates the specs of the shank on this Curt Cargo Carrier. There is a distance of 6-3/4" from...
    view full answer...
    Image 1 for
  • Can Gas/Propane Tanks be Carried on Curt Trailer Hitch Mount Cargo Carrier C18110
    There is nothing prohibiting the Curt cargo carrier # C18110 from carrying gas or propane tanks. But you might want to check your local and state laws to determine if there are any restrictions on how those items should be carried.
    view full answer...
  • Compatibility of Curt C18110 Cargo Carrier With Class I Hitch on 2022 Chevy TrailBlazer
    The Curt # C18110 19x47 Cargo Carrier is designed to work with both Class I and II 1-1/4 inch receivers as well as 2 inch receivers if the included sleeve is used, so it'll work great with the Class I hitch installed on your 2022 Chevy Trailblazer. The cargo carrier is rated for 300 lbs, but a Class I hitch typically has a 200 lb tongue weight capacity (maximum amount of downward force that can safely be applied to the hitch) so you'll be limited by the hitch tongue weight capacity in...
    view full answer...
  • When Using Curt Cargo Carrier in 1-1/4 inch Hitch is Same Hitch Pin Used
    When using the Curt hitch carrier part # C18110 in a 1-1/4 inch hitch you'd need to take off the 2 inch hitch adapter on the end of the shank. This will allow it to fit the smaller hitch size. The same threaded hitch pin gets used whether you use the 2 inch adapter or not as the shank has threads in it that the bolt threads too which allows the bolt to lock it against the hitch tube.
    view full answer...
  • Can a 3-Wheeled Scooter be Carried on the Back of a 2016 Kia Soul
    In all likelihood, no, trailer hitch # 24915 for the 2016 Kia Soul will not support a 3-wheeled scooter. The hitch has a tongue weight capacity of 200 pounds. The combined weight of the scooter and the carrier it is on would have to be less than 200 pounds. The lightest Class I compatible cargo carrier we have that would also work best for a scooter is # C18110 at 30 pounds. That means as long as the scooter weighs less than 170 pounds you would be within the 200 pound capacity. Otherwise...
    view full answer...
  • Hitch Cargo Carrier Option for Transporting Snow Blower with 2003 Subaru Forester
    I have a solution for you, but the MaxxTow cargo carriers you referenced will not work with the Class II trailer hitches for your Forester. Since only Class II trailer hitches are available for your vehicle, you will want to use a cargo carrier that is designed to fit a 1-1/4 inch trailer hitch receiver. We do not have any cargo carriers with ramps designed to fit 1-1/4 inch trailer hitches. I recommend the 20x48 Curt Cargo Carrier for 1-1/4 Inch and 2 Inch Hitches # C18110. This cargo...
    view full answer...
  • Cargo Carrier Weight and Tongue Capacity for 2010 Toyota Corolla
    The 19X 47 Curt Carrier # C18110, weighs 30 pounds. Yes you must factor in the weight of the cargo carrier and cargo and any items loaded behind the rear axle of the car. You also need to check your vehicle maximum tongue weight rating and use the lowest maximum rating of the vehicle, hitch or cargo carrier as the weight that can be carried in the receiver hitch. If you have a 200 pound max tongue weight rating and no items loaded in the vehicle behind the rear axle then you could carry...
    view full answer...
  • Actual Weight Carrying Capacity of Surco # C18110 Cargo Carrier Installed in Class I Receiver
    When the weight of the shipping box is subtracted, the Surco # 52017 Cargo Carrier weighs 30 lbs. Since the Class I receiver on your 2009 Accord has a 200 lb tongue weight capacity, the 30 lbs would be deducted from the tongue weight capacity of the hitch. This would leave a capacity for the carrier of 170 lbs, which is still pretty respectable. You were right on the money.
    view full answer...
  • Is a 1-1/4 to 2 Inch Trailer Hitch Receiver Adapter Recommended for Use with a 2 inch Cargo Carrier
    I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4 inch hitches, especially Class I hitches, are not designed to handle. For this reason all 1-1/4 to 2 inch hitch adapters decrease the hitch or vehicle tongue weight capacity, whichever is lowest, by 50 percent, making a class one hitch only...
    view full answer...
  • Cargo Carrier Recommendations for a 2011 Hyundai Tuscon with 1-1/4 inch Trailer Hitch
    Yes, the 19X 47 Curt Carrier # C18110 would work great on your 2011 Tuscon. It includes an easy clean mesh floor. This carrier has an angled 3-3/4" rise shank to help with ground clearance. This carrier weighs 30 pounds. This carrier does not fold up, and because of the lower weight capacities of 1-1/4 inch hitches, none of the 1-1/4 inch cargo carriers that we carry, see link, are designed to fold. This is the case because the folding mechanism can create extra torque on the trailer...
    view full answer...
  • Weight Capacity for the Curt Hitch Mount Cargo Carrier
    When using a cargo carrier like the part # C18110 there are two capacities that you will need to consider. First is the weight capacity of the cargo carrier # C18110 which is 300 lbs. That just means the carrier is capable of carrying 300 lbs. Now the next capacity to consider is the tongue weight capacity of the vehicle you plan to use the carrier on. Also when considering this you need to consider the weight of this carrier at 30 lbs. The only way you'd be able to use the max capacity...
    view full answer...

< Previous
123. . .18

Do you have a question about this Hitch Cargo Carrier?

  • Why

    At we guarantee:
  • Highest quality hitch cargo carrier for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch cargo carrier information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee John D
Video by:
John D
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Joshua M
Video by:
Joshua M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Andrew S
Test Fit:
Andrew S
Employee Robert C
Test Fit:
Robert C
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Adele M
Updated by:
Adele M
Employee Brian B
Updated by:
Brian B
Employee Wilson B
Updated by:
Wilson B
Employee Jason W
Updated by:
Jason W
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Laura H
Written by:
Laura H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.