Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your hitch receiver free from dirt and debris with this cap-style cover. It has a band that fits snugly around the hitch tube so you can just keep it on there even when towing. A storage port for your 4-pole keeps your plug right there, at the ready. So simple, yet so ingenious!
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Curt rubber hitch cover for two-inch trailer hitch receivers. Now, this part will keep your hitch receiver free from dirt and debris with this cap-style cover. It has this band right here that will fit snugly around the hitch tube, so that you can just keep it on there, even when you're towing. And, if you notice, on the band, right at the bottom here, it has a storage port that you can put your four-way in, to keep your four-way connector from hanging down and keeps the plug right there, ready to connect.What I am going to demonstrate, right here, is I got an example of here's what the end of a two-inch hitch receiver opening would look like. So all you have to do first is just take this and stretch that band right around the opening, until it goes around the tube. Then slide it back, just like that.
Then, once you've got it on there, then you can take your hitch cover and go ahead and just push it right into place. It's a nice rubber, firm fit. Once you push it all the way into place, it gives you a nice, secure fit, and then the nice features, again, if you look underneath, you see that port, right there.So here's an example, like if you have this four-way hanging on your vehicle. Instead of having it hanging down, all you have to do is just insert it, push it all the way in there. You can see, just like that, it will hold your four-way right into place, ready to plug in whenever you need to tow.But that should do it for the review on the Curt rubber hitch cover for two-inch trailer hitch receivers..
Average Customer Rating: 4.8 out of 5 stars (539 Customer Reviews)
I bought a hitch receiver a while ago and lost it driving through a farm (not the best idea). I drove into a ditch with tall grass and dirt, the cover was ripped off the hitch and my hitch was exposed filled with grass. By the time I realized the cover was lost, I was three hours away so I decided to get a new one. Very happy with the protection and look it gives to my car.
This hitch cover fell off during the first week of use — same as the previous one. I've given up on hitch covers.
I didn't want dirt, dust, and spiders to get inside the receiver so started looking for a receiver cap that solved that, and more importantly, looked clean. Etrailer always has what I need so I started my search here. I found this one right away and knew this was the one. Our van's receiver was not installed with any electrical wiring so I didn't need the cap to protect the plug. A few minutes of "customizing" and voila!... it fit perfect and looks super clean. I'm glad I bought this one.
I like this cover a lot. I cut the cover and the band with the 4-pole connector holder apart so It would hold the wires on top of the receiver and not be hang down when the hitch is in use. This worked out very well on my 2012 Chevy Equinox and keeps everything very clean looking. The rubber cover is soft and stays in place very well on my Curt hitch receiver.
Works nicely. Simple install and looks good.
I have attached three pictures if you want to use them. One is a shot of the 3 bolts on one side of the hitch after I bolted it to my 2016 RX 350. Another shot is of the hitch beautifully displayed below the center of the bumper. The third shot is with the hitch cover on.
Awesome product, fits tight, like retention strap. Had one before, different vehicle, proved durable. Newer version also has holder for 4 pin connector.
Discreet look and perfect fit for my Draw-Tite hitch. The rubber may also help to cushion any blows to the shins when loading & unloading stuff.
Cover works great. Keeps my wireing harness dry too.
Great cover. Made of durable black rubber, it should be able to cushion a minor impact and protect the hitch. The strap is a very useful feature. I just flip it up when I attach my bike rack and I don't have to worry about loosing it.
Perfect fit. The wiring harness plug holder is a nice touch.
Easy to install, helps keep the receiver clean.
Fits well and I like that it has a retainer, so it won't get lost.
Priced right, quick delivery, quality p roduct!
Excellent product! I bought two, one for my Tacoma and for the wife's Colorado, I Gorilla glued some loop velcro on mine and then affixed a morale patch, you are welcome to share if you'd like. Etrailer is a great place to do business with, Thank you!
Good quality cover. I rotated the cover so it hinges open like a door with the flat four electrical stowing feature on the side. Works great.
etrailer.com took the guess work out of finding the right trailer hitch for my vehicle and needs. The combination of printed instructions and videos made installation a snap. Two recommendations...1) "unscrew" the metal fishing wires a bit before placement of the hitch...I had them fully threaded and it was harder to remove them once the rack was in place, 2) I installed this on my own...and extra set of hands will make it much easier to lift the hitch and navigate the muffler/exhaust.
Fit good and will do the job. Thanks!
Great quality! Easy installation!
Just what I ordered. Looks exactly like the picture and fits exactly.
Looks great!
This item no. I-728, Rubber Tube Cover for 2" Trailer Hitch Receivers, is great in all regards. It was so easy to install, high quality, does its protecting job, looks super on vehicle but simple and plain, doesn't call attention to itself. Appears will be long lasting. Exactly what I was wanting and only one found anywhere which fit all my needs. And Ellen N. was so helpful in ordering, immediate shipment, arrived in perfect condition. Can't praise highly enough both the product and the purchasing experience. Both beyond excellent - exceptional!
Jim O.
6/4/2017
Great! Perfect! Could not be more pleased. Looks great, works great, wears great. Cant think of any other purchase of any type which has worked so well!
Not a ton to say about the product itself, just a good plain trailer hitch receiver cover. I had the same one for years and traded my truck and forgot to yank it off. etrailer.com was the only place I could find the same cover. Everyone else had silly sayings of which I was not interested in. etrailer.com had what I was looking for at a very fair price. I received my order quickly and it shipped at a very reasonable shipping rate. I would definitely order from etrailer.com again.
Craig C.
6/15/2016
Awesome!
Perfect product
The unit fits perfectly over my 2” hitch mount. I bought it for the purpose of slowing down rust starting up. It’s plain black rubber color goes along with the black paint of my Ford Draw-Tite hitch. Nothing fancy but look nice covering the hole on my hitch when not pulling a trailer.
Mike L.
9/13/2018
Because a trailer hitch is exposed to debris kicked up from the road and ice-melting chemicals, its a good idea to give the hitch a look over once a year or so and touch up any rust spots. The powder coat on a hitch is pretty durable, but abrasion will wear it away leaving the hitch vulnerable to corrosion.
Robert
9/13/2019
It’s been a year and the hitch cover is still looking good with no visible aging from the element or salt water effect. It’s a good and sturdy product and covers my hitch mount well whenever I remove my hitch. I’m glad I bought and installed it keeping the back of my van looking nice.
Do you have a question about this Hitch Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
8/30/2023
The hitch cover meets expectations but it requires some attention when ing into the receiver. It does not always want to stay in. Need to double check that it is fully ed.