Buyers Products Weld-On Pintle Hitch Plate - 34-5/8" Wide x 15-5/8" Tall

See what our Experts say about this Buyers Products Hitch Fabrication Parts

• Pintle Hitch Plate For 1997 Ford L8000 Dump Truck
  The only option we have for a pintle hook plate that has D-rings attached for the 1997 Ford L8000 Dump truck is the fabrication plates like part # 3371809042 part # 3371809043 and part # 3371809040. These plates come with the D-rings to be welded on with additional gussets for strength. Then you would use Buyers Pintle Hook with Mounting Kit - Bolt On part # 33710042. We do not currently carry anything that is truly adjustable for the dump truck unless you have a 2" hitch. Then you could...
  view full answer...
• Heavy Duty Hitch Plate For a 2023 Mack MD7 Truck
  For your 2023 Mack MD7 you will need to use one of the Buyers Products Weld-On Pintle Hitch Plates. You will need to select the best plate for your truck based on the dimensions of the plate below. 34-1/2" Wide x 15-1/2" Tall # 3371809042 34-1/2" Wide x 25-1/2" Tall # 3371809027A 34-5/8" Wide x 15-5/8" Tall # 3371809040 34-1/2" Wide x 22-1/2" Tall # 3371809043
  view full answer...
• Is There a Hitch Plate Available For a 2008 Ford F-650?
  While we do not have a custom fit hitch plate for your 2008 Ford F-650 you are able to use one of the universal kits from the list below. I listed the dimensions of the main plate so you can verify which will fit your frame rails best on your F-650. 3/4" Thick x 34-1/2" Wide x 23-1/2" Tall # 3371809027A 1/2" Thick x 34-5/8" Wide x 15-5/8" Tall # 3371809040 5/8" Thick x 34-1/2" Wide x 15-1/2" Tall # 3371809042 5/8" Thick x 34-1/2" Wide x 22-1/2" Tall # 3371809043
  view full answer...
• Hitch Plate That Can be Used at Rear of 1991 Dodge Ram 350
  We don't have hitch plates that were specifically designed to fit your 1991 Dodge Ram due to the age of it but we have fab options like the part # 3371809040 which you could use to weld the plate to your truck and you'd be set.
  view full answer...
• What Frame Dimensions Does Buyers Products Hitch Plate # 3371809061A Fit
  The 34 inch trailer frame measurement is taken from outside to outside of the two frame channels. On older heavy duty vehicles like yours this is a very common size so most likely this would work for you. If this won't fit your best option would be to find a fabricator who could weld you up a hitch solution as custom fit options would be very limited. We also have plates without brackets like the part # 3371809040 as well.
  view full answer...
• Recommended Hitch Plate for a 1999 International 4700
  I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you are not an experienced welder then I recommend taking both the hitch plate and your truck to one for installation. The hitch plates below all come with d-rings for the safety chains as well as gussets for added strength. Buyers Products Fabricators...
  view full answer...
  
• Solution for Bolt-On Hitch Plate for 2001 International Trucks 4700
  The best option we have for your 2001 International 4700 is going to be a weld-on hitch plate. Unfortunately there are no bolt on options available for your truck. Make sure to use an experienced welder for installation of the hitch plate. We have the following hitch plates available: Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040 Buyers Products Fabricators Hitch Plate -...
  view full answer...
• Hitch Plate that Could Fit 2016 International 4300
  While we don't have any custom fit hitch plates that fit your 2016 International 4300 we do have some universal mounts that would potentially work. You'd need to have a qualified welder install the kit. The hitch plates below all come with d-rings for the safety chains as well as gussets for added strength. Buyers Products Fabricators Hitch Plate: part # 3371809040 (1/2" thick x 34-5/8" wide x 15-5/8" tall) Buyers Products Fabricators Hitch Plate: part # 3371809042 (5/8" thick x 34-1/2"...
  view full answer...
• Do They Make the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumpers for 37 Frames
  I do have an option but all of the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumpers like part # 3371809055 are designed for cab and chassis models which have the narrower frame rails. If you want to install one on a standard model which has the wider frame rails you'll need to go with one of the universal plates like the Buyers Products Fabricators Hitch Plate part # 3371809040 and make some custom brackets.
  view full answer...
• Recommended Hitch Plate for 2021 Interational CV515
  For your 2021 International CV515 you will need to use a universal weld-on hitch plate. There are no custom hitch plates available that will fit your truck. We have three different options. Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040 You would need to have a professional welder perform the installation....
  view full answer...
• What Is the Correct Hitch Fabrication Plate for a Semi Tractor
  We do carry a range of hitch fabrication plates such as the Buyers Products Fabricators Hitch Plat part # 3371809040 which measures 34-5/8" wide x 15-5/8" tall. That said, these are universal in design as the end product requires modifications to fit the exact application. I don't have any options specific to a particular make or model but these are the same plates you do see installed on big rigs so what you need to do is choose the one with the best dimensions for your particular application...
  view full answer...
• Will the Buyers Products Hitch Plate with Receiver Tube Fit a 2001 Dodge Ram 3500 Chassis
  The Buyers Products Hitch Plate with Receiver Tube - Dodge/RAM part # 3371809067 is designed for 2007+ models. The only option we have for the older models is the Buyers Products Fabricators Hitch Plates like part # 3371809040 which requires custom fabrication i.e. drilling and welding.
  view full answer...
• Buyers Products Fabricators Hitch Plate Kits For a 2006 GMC Topkick 7500
  I recommend one of the Buyers Products Fabricators Hitch Plate Kits for your 2006 GMC Topkick 7500 as there is not a hitch plate specific to your vehicle. Here are the ones we carry. Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040 Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2"...
  view full answer...
• Solution for Hitch Plate for 1996 International 4700 LPX
  According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International 4700 LPX you will need to use a universal weld-on hitch plate. Unfortunately, there are no custom hitch plates available that will fit your truck. We have the following options. Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042 Buyers Products...
  view full answer...
• Will Buyers Products Hitch Plate Fit 1990 Ford F-Super Duty
  Hi Cody; Buyers Products was unable to confirm if the # 3371809060A could fit your 1990 Ford F-Superduty. What you can do is look at the measurements below to see if they line up with what you have. If not, you could use one of the following universal options: Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" #...
  view full answer...
• How To Confirm Fit of Buyers Products Fabricators Hitch Plate
  I don't have any specs to determine fit of the Buyers Products Fabricators Hitch Plate like part # 3371809040 on any one vehicle but you can make an educated guess using the overall dimensions of the plate which for the above are 34-5/8" wide x 15-5/8" tall. You'll need to weld the hitch in place so modifications are to be expected.
  view full answer...
• Is There a Pintle Hitch Plate Option that Fits 2002 Dodge Ram 2500
  Buyers Products doesn't offer a custom fit pintle hitch plate for your 2002 Dodge Ram 2500 but they do have the part # 3371809040 which is one you could use to fabricate something that would fit your truck. This comes with a plate that measures 1/2" thick by 34-5/8" wide by 15-5/8" tall, safety chain loops, and some angled mounting brackets as well.
  view full answer...
• Is There a Buyers Products Hitch Plate for a 2000 Dodge Ram
  There is not a custom Buyers Products Hitch Plate for a 2000 Dodge Ram. Therefore, you'll have to use one of the Buyers Products Fabricators Hitch Plates like part # 3371809040 and fabricate the rest of the supports needed for installation. The plates will then accept most pintle hooks like the Buyers Products 10 Ton Pintle Hook part # 337PH10.
  view full answer...

Do you have a question about this Hitch Fabrication Part?