bing tracking image
  1. Hitch Pins and Clips
  2. CURT
  3. Fits 1-1/4 Inch Hitch
  4. Standard Hitch Pin
  5. 1/2 Inch Diameter
  6. 2-1/2 Inch Span
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span
CURT

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

Part Number: F-4
In Stock
$2.94
Retail:$8.54
You Save: 66%
Hitch Pins and Clips
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion. 1-800-940-8924 to order CURT hitch pins and clips part number F-4 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span. Hitch Pins and Clips reviews from real customers.
  • All Info
  • Reviews (733)
  • Q & A (0)
  • Videos (1)
  • Photos

CURT Hitch Pins and Clips - F-4

  • Fits 1-1/4 Inch Hitch
  • Standard Hitch Pin
  • 1/2 Inch Diameter
  • 2-1/2 Inch Span
  • 2-1/2 Inch Long
  • CURT

This 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.


Features:

  • Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver
    • Included clip inserts into end of pin to hold pin in place
  • Sturdy steel construction
  • Corrosion-resistant zinc-plated finish


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Pin diameter: 1/2"
  • Usable length (span): 2"


F-4 Curt Manufacturing Class I and Class II Trailer Hitch Receiver Pin and Clip





Video of Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of CURT Hitch Pins and Clips - Standard Hitch Pin - F-4

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Curt half inch diameter hitch pin and clip for the 1 1/4 inch hitches. Now this hitch pin will secure your ball mount or other hitch mount accessory in your 1 1/4 inch trailer hitch receiver. The included clip right here is what'll insert into the hole at the end of the pin to hold the pin in place. So basically when you install this, you'll put your ball mount or hitch accessory in, run this through all the holes. When it comes out the other side, you'll just take your clip, slide that in, and that'll hold it into place.

And then when you're ready to move it, just take your clip out, slide your pin out, and then you can move your accessory or ball mount. This is a sturdy steel construction. Has a nice corrosion resistant zinc plated finish. Application, as we mentioned, fits 1 1/4 inch by 1 1/4 inch trailer hitch receivers. Pin diameter is a half an inch, and the usable length, which is gonna be measured from here to here on this pin is gonna be right at up two inches.

But that's gonna do it for a look at this Curt half inch diameter hitch pin and clip for 1 1/4 inch hitches.

Customer Satisfaction Score:


Customer Reviews

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span - F-4

Average Customer Rating:  4.8 out of 5 stars   (733 Customer Reviews)

This 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.

by:

works well, but with the particular hitch, the safety chain loops make getting the clip in the pin hole a little difficult. Slightly longer pin would be great

Etrailer Expert

Jenny N.

5/3/2024

We do have a hitch pin that would be longer, it is 3 inches with its usable length, part # ML1495DAT. And it also doubles as lock.



by:

Bolted on easily, perfect fit. Low profile makes it barely visible. I use it for a bike track and I have full confidence in its support.



by:

this was just what I needed to keep my bike rack from dragging over a hump where I park. works grate. and thank you.



by:

Very nice Hitch Pin & Clip. Fits really well, I had some in the past that didn't.



by:

Great product, tho directions called for 19mm socket (actually uses 18mm socket). Installed in my driveway using common tools, and drove the rear wheels up on some blocks of wood to get a couple extra inches of space to work. I loved the 'fishing wires' that came with to get the bolts and spacers through the holes - how clever!



by:

Fit well, great product. Delivered as p romised.



by:

It’s a great product, I highly recommend it, you won’t regret it



by:

I always seem to miss place the pins so I got extra, the personal at rtrailer are great, Tammie you did a great job, that's why I keep coming back

Les C.

4/29/2023

Works great, Tammie did a great job,I will an have told my friends



by:

Solid, Does it's job, and is cheap. What more could you want?



by:

fast shipping great customer service



by:

It's a pin. What can one say?



by:

Quick. Fair Price. Excellent Communication. First, we ordered the hitch and had it installed. Then we needed the perfect fit for the task at hand: to pull a tank with gray water through a campground. Very specific. Just for our toad, a Smart car.
Etrailer.com has the perfect software to lead you to what you need for the perfect combination. Quick shipment, reasonably priced. Direct communication for every step in the process. All in all, exactly what you’d hope for during these extremely dysfunctional time.



by:

Every part excellent quality. Perfect fit, all parts were exact for my vehicle. Watched the video on youtube for wiring and being a mechanic for over 50 years was able to connect signal lights all from driver side of harness. Instead of leaving plug inside trunk I wired through the rubber outlet to the back of the hitch ready for use. Very happy highly recommend etrailer.

Brad H.

9/24/2018

Very happy with products all high quality feel confident using. Thanks



by:

Rcvd my hitch today (one day earlier than predicted by etrailer when I ordered...well done!). Everything was received as expected/requested.
Crawled under the car and started installation immediately. Piece of cake really; although some people would struggle with the tight space, 13 year old car, and need to clean threads, and remove caulk/undercoat in order to achieve "hole alignment".
Hyundai also did a great job by having pre-threaded welded nuts in place.
So far.... a great product received in time to use this weekend (as was my plan).

Great job and great product by etrailer.
Also, the website was easy to use and the videos quite helpful.
I will be back!
Thank you,
2008 Hyundai Sonata

Frank

10/20/2022

Hitch etc is holding up fine. Routinely used to pull trailers up to 2000 lbs with a 2008 Hyundai Sonata. I avoid going over 55 mph, or sway is detectable.



by:

They did the job!



by:

Fits good and tight into the space available, and designed to take advantage of the strongest part of the unibody.
Pro tip #1: On Subaru installations calling for cutting out an opening, take the time to remove the bumper, allowing access to the unibody tunnel without hacking a hole into it, to insert the carriage bolts and reinforcement plates.
Pro tip #2: While you have access to the unibody tunnel, now is a great time to apply Fluid Film/Woolwax/B'laster Surface Shield to the interior of the unibody, bumper, and undercarriage, to make your automobile last much longer!



by:

Arrived 1 day early. Will buy from etrailer agin



by:

Excellent service, quick responses to questions and delivery



by:

I got this a year ago to install on my tiny Honda Fit.It was easy to put together myself. I needed extra room to attend art fairs with all my product and displays. It works very well and so easy to take off and put it back on whenever I need to use it.



by:

I ordered this part by accident I didn't notice it came with the hitch. I'm going to keep it. I have a bolt in one of my other vehicles.



by:

like the stuff I;ve ordered so far!



by:

It’s a hitch pin, it worked great. I don’t leave my hitch on 24/7. I would recommend a locking hitch pin if you plan on leaving your hitch on permanently. I only use mine a few times per year, so this one was perfect.



by:

It's a hitch pin. What could go wrong.

Thanks
for the fine service and quick delivery.



by:

Nice fit. Shipped fast.



by:

The most straight forward install ever. Excellent instructions, four bolts and your done. The only thing you really need is a torque wrench. Well designed product and no interference with stock exhaust on my 2011 VW GTI.


25
733
Show More Reviews

See what our Experts say about this CURT Hitch Pins and Clips

  • Will Draw-Tite Hitch For 2017 Ford Fusion Work With 2 Inch Hitch Adapter For Bike Rack
    Hey Karen, you'll need a specific adapter but the answer is yes, you can use a 1-1/4 inch to 2 inch adapter for your bike rack on your 2017 Ford Fusion with the Draw-Tite Sportframe Trailer Hitch Receiver # 24897. What you will need is one compatible with the Class I hitch, the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD; to secure it to your hitch use the Pin & Clip # F-4. Keep in mind this will halve the capacity of the hitch, so the capacity of your bike rack and bike(s)...
    view full answer...
  • Parts Needed to Tow With 2012 Ford Fusion
    Hi Nicholas, We can get you a hitch for your 2012 Ford Fusion, but the maximum capacity for the hitch that fits is 2,000 lbs towing and 200 lbs tongue weight. You mentioned the ATV is 800 lbs and trailer is 775 lbs, so that is under 2k and would be just fine, just remember you want to stay under that weight. With that in mind, here is the hitch, wiring, and other parts you'll need to tow with your 2012 Ford Fusion: - Curt Trailer Hitch Receiver # C11390 - Vehicle Wiring Harness # 118422 -...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Honda Fit Sport
    For your 2008 Honda Fit, I recommend the Curt Class I, part # C11058 that you referenced. It installs fairly quickly and easily onto your vehicle and adds a 1-1/4 inch hitch. I recommend adding the Curt Class II Drawbar, part # C45521. This is a basic drawbar with a 3/4 inch diameter ball hole, and you'll combine this with either a 1-7/8 inch diameter ball, part # A-80 or 2 inch diameter hitch ball, part # A-82, depending on your trailer's coupler size. You'll connect this to the receiver...
    view full answer...
  • Trailer Hitch & Wiring Harness For 2023 Kia Seltos to Tow Trailer
    We can set you up to tow with your 2023 Kia Seltos, and I'll go ahead and list out exactly what you need: - Curt Trailer Hitch Receiver # C65FR - T-Connector Vehicle Wiring Harness # C89KR - Curt Drawbar # C45521 - Pin and Clip # F-4 - 2" Hitch Ball # C40018 or 1-7/8" Hitch Ball # C40001
    view full answer...
  • Recommended Trailer Hitch, Wiring Harness and Ball Mount for 2004 Volvo XC70
    There are options to install a trailer hitch on your 2004 Volvo XC70 but the only fits for this vehicle are Class II hitches with a 1-1/4 inch receiver and they do not allow weight distribution to be used; I checked with the hitch manufacturers to make sure. Among these hitches for your Volvo I recommend the Curt Trailer Hitch # C12318 durable steel construction, easy bolt-on installation and the fact is made in the USA. The accompanying photo is one a customer sent in of this hitch installed...
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver & Towing Set Up For Lexus 2006 IS 250
    There is not because the only trailer hitch receiver that fits your 2006 Lexus IS 250 is indeed the Class 1, 1-1/4 inch hitch from Curt. I'll go ahead and list below the hitch, and all other parts you'll need for towing if that's what you want the hitch for: - Curt Trailer Hitch Receiver # C11372 - 4-Way Wiring Harness # C59496 - Curt Drawbar # C45521 - Pin and Clip # F-4 - 2" Hitch Ball # 19258 or 1-7/8" Hitch Ball # 19256
    view full answer...
  • Utility Trailer, Trailer Hitch Receiver, and Wiring Harness For Towing With 2014 Buick Verano 2.4L
    First you will only be able to tow a trailer if your 2014 Buick Verano has the 2.4L engine and a single exit exhaust. The 2.0L turbo is not rated to tow from Buick and will not fit with Curt Trailer Hitch Receiver # C11282. This receiver paired with a 2.4L single side exhaust will allow you to tow up to 1,000lbs according to your owners manual. The Curt T-Connector Vehicle Wiring Harness # C56288 will give you a 4-way flat trailer connector. This will connect to a Detail K2 Mighty Multi...
    view full answer...
  • Trailer Hitch Recommendation for Towing Jet Ski Trailer with a 2017 Hyundai Elantra
    I recommend going with the Curt Trailer Hitch Receiver # C11424 for your 2017 Hyundai Elantra as long as it's a Sedan (excluding the Sport edition). I like the Curt hitches because they tend to have a thicker powder coat which helps to protect them longer. If you have a different model of the Elantra please let me know and I can make a different recommendation from the linked selection. To complete a towing setup you also need wiring and a ball mount setup. I recommend picking up the Curt...
    view full answer...
  • Correct Hopkins Plug-In Simple Vehicle Wiring Harness for a 2010 Buick Lucerne
    The Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # HM11141395 is a confirmed fit for a Buick Lucerne from 2006 - 2011, therefore it does indeed fit your 2010. If you need any other parts to start towing with your 2010 Buick Lucerne such as a trailer hitch and ball mount/hitch ball, check out the list I have created for you below. Curt Trailer Hitch Receiver part # C12022 Curt Drawbar for 1-1/4" Hitches part # C45520 Curt Hitch Pin and Clip part...
    view full answer...
  • All Parts Needed to Tow U-Haul Trailer With 2011 Hyundai Sonata Non-Hybrid
    Appreciate that info and we can go ahead and get you all the parts you need, including the ball mount, to tow the U-Haul trailer with your 2011 Hyundai Sonata non-hybrid. I'll go ahead and list them for you below: - Curt Trailer Hitch Receiver # C11025 - Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56049 - Curt Class II Euro Style Drawbar with 1-7/8" Ball - 5-1/8" Rise # C45591 - Hitch Pin and Clip # F-4 Both the hitch and wiring harness are fits for your '11 Sonata,...
    view full answer...
  • Hitch Pin to Use with Curt Hitch # C12264
    Hitch pin size doesn't matter that much I would say. As long as the pin fits through the hitch pin hole and the accessories hitch pin hole you'd be fine. That said, if you were looking at the Curt hitch part # C12264 the # F-4 is an easy solution for a hitch pin and clip.
    view full answer...
  • Does a Curt Trailer hitch Come with a Ball Mount
    The Curt Class I trailer hitch # C11124 does not come with the appropriate ball mount. The correct ball mount for this hitch is # C45520. I checked your order and it looks like you did order it so you chose the correct one. Then use # F-4 for a pin and clip and for a 1-7/8 inch ball use # 19256 or for a 2 inch use # 19258.
    view full answer...
  • Recommended Trailer Hitch Receiver and Draw-Bar For 2011 Toyota Prius
    I would be happy to help! The Curt Trailer Hitch Receiver # C11276 is confirmed to fit your 2011 Toyota Prius and has a 200lb tongue weight rating and 2000lb trailer weight rating so you will need to make sure your trailer does not exceed those ratings. For a drawbar Curt recommends the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 which has a 2-3/4" rise. For a compatible 2" hitch ball you will need the # A-82, and for a hitch pin and clip you will...
    view full answer...
  • Best Trailer Wiring Harness Option for 2004 BMW 325xi Sedan
    Since there isn't a plug and play option for your 2004 BMW 325xi Sedan, the best option and the one I recommend is the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. What sets this harness apart from others is that it uses sensors that clamp onto your vehicle's tail light wires to sense the current and transfer it back to the trailer connector. This means you don't have to worry about any potential issues caused by cutting or splicing into your BMW's factory wiring. The built...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2019 Volkswagen Golf
    I have a different hitch recommendation for you, but the Draw-Tite Trailer Hitch # 24949 you were looking at is only confirmed to fit the 2019 Volkswagen Golf Sportwagen's and will not fit your standard Golf. Instead we have the Curt Trailer Hitch Receiver # C11412 which is currently the only option for your standard 2019 Volkswagen Golf. While the vehicles do appear somewhat similar they are not interchangeable due to vehicle differences. This hitch is made here in the USA so you know...
    view full answer...
  • Weight of Curt Trailer Hitch C11567 For 2020 Toyota C-HR
    I verified with the manufacturer for you that the weight is just 25 lbs for the Curt hitch that fits your 2020 Toyota C-HR, which is the following part: - Curt Trailer Hitch Receiver # C11567 I have added a link below to a video install of this hitch on a similar model year C-HR for you to check out if you'd like to take a look. Additionally, if you plan on doing some light towing with your C-HR you'll need some other parts as well, which I'll list out for you. - T-One Vehicle Wiring...
    view full answer...
  • Recommended Trailer Wiring Harness on a 2014 Audi A6
    We do not carry a custom wiring kit for your 2014 Audi A6. I recommend using the ZCI Circuit Protected Wiring Harness # 119250KIT on your Audi. This is a universal harness that does not require any splicing. Instead, it uses sensors that clamp around the car's wires to read the current that travels through the wire. I've attached an install video for you to take a look at. If you don't already have a htich reciever on your A6, the Curt # C11423 is a Class I receiver confirmed to fit....
    view full answer...
  • Hitch Installation on 2014 Nissan Versa
    Page 9-16 of the online edition of the owner's manual for the 2014 Nissan Versa says only this about towing a trailer: "Do not tow a trailer with your vehicle". Attaching a hitch such as light-duty Class I hitch # C11256 from Curt will not change the vehicle's capacities. When hitches are made for cars that are not intended to tow this is so that they can use accessory items like bike racks such as # S64650 and cargo carriers such as # C18145. An installation video for this hitch is...
    view full answer...
  • How Does Trailer Hitch Receiver for 2022 Kia Seltos Attach To Frame
    No worries, the Curt Trailer Hitch Receiver, # C65FR is a no drilling needed installation. This is a bolt-on installation with no welding required or drilling of new holes. It uses existing factory hardware to be mounted to holes that already exist. This is a 1-1/4" x 1-1/4" Class I hitch with a max gross trailer weight of 2,000 lbs. and a max tongue weight of 200 lbs. If you plan on doing some light towing there are a few other parts you'll need too. - Vehicle Wiring Harness # C89KR -...
    view full answer...
  • Recommendations For Outfitting A 2008 Subaru Forester To Tow A Trailer
    Though the size of the ball and amount of rise or drop for the ball mount will be determined by the size of the trailer coupler and how high it is off the ground, I can definitely make a few suggestions for you. To start with, the Curt # C12038 will be the hitch I recommend. You will need to double check your owner's manual to verify the vehicle capacities, but this will be rated up to 3,500 pounds towing and 350 pounds of tongue weight. Once installed, the top of the receiver opening...
    view full answer...
  • Parts Needed To Be Able To Tow a Trailer With a 2013 Lexus CT 200h
    While we do carry all the components that you will need to be able to tow a trailer with your 2013 Lexus CT 200h it is not recommended for trailer towing by Lexus. That said you are likely past any manufacturer warranties that would be voided so the decision is yours to make. You will need the Curt Trailer Hitch Receiver # C11200 to attach either the 1-7/8" # C45571 or 2" # C45572 Curt Euro Style Drawbar. You will need to match the ball size to the coupler on the trailer. You will need...
    view full answer...
  • Custom Fit Trailer Hitch Receiver For a 2014 Scion iQ and Parts Needed For Towing a Trailer
    The Curt Trailer Hitch Receiver # C11291 is custom fit for your 2014 Scion iQ. It will bolt on with no drilling required but, you may need to enlarge the access holes to get the square hole spacers to fit inside your frame. I recommend installing the Upgraded Circuit Protected Tail Light Converter # 119178KIT when you install the receiver. This will give you a 4-way flat connector that can be used when towing most small trailers. It will also allow for Auxiliary Lights # C53201 if you...
    view full answer...
  • What Size Hitch Pin do I Need for my Curt 1 1/4" Hitch
    The Curt Trailer Hitch Receiver part # C11184 uses a 1/2" pin and clip like part # F-4.
    view full answer...
  • Parts Needed To Transport a 250LB Dirt Bike With a 1999 Honda Civic Sedan Or Hatchback
    For your 1999 Honda Civic sedan or hatchback the Curt # C11207 is the highest capacity with 200lbs of tongue weight. Instead of carrying your 250lb dirt bike on a rack you would need to haul it on a small Trailer # K2MMT4X6. This means you will also need the 4-Way # 119178KIT to control the trailer tail lights. To connect to this particular trailer will need a Ball Mount # C45017, 1-7/8" Ball # 19256 and Hitch Pin # F-4. Other small utility trailers may require a 2" Ball # 19258 depending...
    view full answer...


< Previous
123. . .21



Do you have a question about this Hitch Pins and Clip?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924