Roadmaster Hitch Pin and Clip for 2" or 2-1/2" Hitch - 5/8" Diameter x 4" Span

See what our Experts say about this Roadmaster Hitch Pins and Clips

• Is a Longer Threaded Hitch Pin Available for the Flint Hill Goods Cargo Carrier?
  We do not have a longer threaded hitch pin option that'll work with the Flint Hill Goods 22" x 60" Cargo Carrier # FHG49ZR however what you could do is use the Roadmaster Hitch Pin and Clip for 2" or 2-1/2" Hitch - 5/8" Diameter x 4" Span # RM-910034 which will give you an additional 1-3/8" of pin length in conjunction with the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches # RM-062. This will ensure that your Flint Hill Goods 22" x 60" Cargo Carrier # FHG49ZR will stay secured in...
  view full answer...
• Flat Tow Set Up For 2019 Mini Cooper Convertible S
  There are few items you are going to need to flat tow your 2019 Mini Cooper behind your 2020 Tiffin Wayfarer. The following is what you will need to set the vehicle up: Blue Ox Base Plate Kit Item # BX1312. This base plate is a custom fit base plate. Steele construction and attaches to the chassis of the vehicle to provide a solid connection point for the tow bar. It is compatible with the Mini Cooper convertible and convertible S. It has removable tabs so the front of the vehicle looks...
  view full answer...
  
• GenY and Roadmaster Hitch Pin Weight Capacity Comparisons
  Roadmaster hitch pins like # RM-316 and # RM-910034 are both rated for 10,000lbs. The GenY hitch pins like the # 325-GH-099 are rated for 32,000lbs. If you were using the # RM-316 the only way the lock would fall off is if it wasn't properly seated on the hitch pin when installed. If you were using the # RM-910034 the hitch pin clip could've came off. The GenY hitch pin clips wrap down for a bit of extra protection from coming off unlike the Roadmaster hitch pin clips. When -installing...
  view full answer...
• Comparison Of Andersen And Curt Adjustable Ball Mount
  Both of the adjustable ball mounts you asked about are well made and meet all of the requirements for towing. The Andersen, part # AM3298 has an 8-inch rise or drop versus the Curt, part # C45900 that has a 5-1/4 inch rise or 6-inch drop. Both of the ball mounts have the same weight capacity. The # AM3298 is made in the US. The Curt # C45900 is made overseas. The Curt does feature anti-rattle but the Andersen does not have that feature. The hitch pin and clip are included with the Curt...
  view full answer...
• What Size Hole is On the Roadmaster Direct-Connect Base Plate Kit for Connecting the Tow Bar
  The Roadmaster Direct-Connect Base Plate Kit # RM24VR has a 5/8" hole on the tow bar clevis. If you are needing a pin(s) we have the Roadmaster Hitch Pin and Clip # RM-910034 available that would fit your needs.
  view full answer...
• What Diameters Are Available For Hitch Pins
  Hitch pins come in 1/2 inch and 5/8 inch diameters with the 5/8 inch being the most common. Since it sounds like your hitch pin hole has elongated, you should get a new hitch. Send me the make, model, and year of your vehicle and I will make a specific recommendation. For a 1/2 inch diameter hitch pin, I recommend the Curt Class I and II Pin, Item # C21403, for a basic pin or the Tow Ready Trailer Hitch Pin, Item # TR63254 if you need one that locks. For a 5/8 inch pin, I recommend...
  view full answer...
• Using Tow Bar For 2 Inch Hitch in 2-1/2 Inch Hitch Receiver
  While there isn't an adjustable hitch, what you can do is just use a hitch reducer sleeve to fit your tow bar with a 2 inch shank into your 2-1/2 inch hitch. So all you'll need is the following: - Hitch Receiver Reducer Sleeve - 2-1/2" to 2" # BWRHXA2182 Then you can secure the tow bar with either Pin and Clip # RM-910034 or Hitch Lock # e98881.
  view full answer...

Do you have a question about this Hitch Pins and Clip?