Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty and lightweight trailer lets you haul heavy kayaks or canoes. Padded bunks protect your boat and hold it securely in place. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long. Spare tire included.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.
This lightweight and low-profile trailer with padded bunks lets you transport your favorite kayaks or canoes. Because of the trailer's low-profile design, the crossbars sit only 22" off the ground. The lower crossbars provide a safe height to load heavy kayaks and help avoid unnecessary overhead lifting.
With a 7-1/2' tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.
Heavy-duty bunks stabilize your boat and prevent movement while traveling on uneven or rough terrain. They can be adjusted to accomdate different size hulls and eliminate boat-to-boat contact. The bunks durable padding prevents scuffs, scratches, or damage to your boat during transport. To prevent mold or mildew, the bunks have weather-resistant covers to repel moisture and water.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
Average Customer Rating: 4.7 out of 5 stars (87 Customer Reviews)
Heavy-duty and lightweight trailer lets you haul heavy kayaks or canoes. Padded bunks protect your boat and hold it securely in place. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long. Spare tire included.
Bought the LowBed MicroSport specifically for my Blue Sky Boat Works Angler 360 kayak. Trailer works great! It's lower and makes getting the kayak on and off easier. Had no issues with the trailer assembly. LED lights work great. After one year I'm very happy I bought this trailer.
Nice trailer, easy to put together except it, being the low bed cane with directions for the high bed. But Etrailef send me the pdf for the low bed.
David
3/27/2024
This trailer is used to move two 80-pound kayaks around. It works great and after 1 year there have been no issues. I have taken it on several long, over 2,000-mile trips. I did upgrade the tires to a higher speed rating.
Excellent product!! Excellent, fast se rvice!!
Always great service ! Any problems and they step up making things right. Highly recommend Etrailer
Well it finally came in over two months after ordering due to MFG back orders I have finally assembled the trailer and all my friends think it’s great. I have been roof top kayaking for many years but the constant loading unloading and reloading and unloading back home was starting to make me loose my joy of kayaking. Now with this trailer I hope to keep kayaking into my 90’s. And no back pain.
In a few words, "I Love It"
We have used and enjoyed the kayak trailer for about a year. It is a pleasure to arrive home from a kayak trip and I just unhook the trailer and back it into the garage. No more have to lift the kayaks on and off the top of the pickup. During winter I remove the support bars, and tongue to set the trailer up on end against the wall. The only issue has been the wing nuts on kayak holders. I could not tightened them so that the holders move during transport. To solve this issue I replaced the wing nuts with lock nuts. Also the bolt head slips during the tightening of the lock nuts. Other than that, we love the trailer.
This is a fabulous product! Assembly was easy, and it served us well last season with our two 14-foot kayaks. The only reason I'm not giving it 5 stars is that six of the tiny lights in one of the red taillights went out after several uses. I haven't replaced the light yet as it still has working lights, but eventually I'll have to buy a new light fixture and splice in into the wireing harness.
Can't say enough good things about this trailer! I used it for a multi-day kayak trip and we loaded 18ft. fully-loaded sea kayaks onto the trailer. It towed perfectly and I still had room to open the hatch on my Nissan Rogue. Towed it on the highway, on dirt roads and off-road. The fold-down J rack make it easy to load the center boats. Be sure to buy the optional jack stand and 1 person can roll it around even when loaded. It was straight-forward to assemble and it just works great!
Problems after problems. Bowed bunks miss drilled holes and missing nuts. There’s a reason it’s priced low. Think twice or have HD close to replace the missing parts and re-drill holes. Should have stayed with Trailex Trailers. Lesson learned.
Can't say enough about the quality and prices. Ashley and Bridgette in CS were extremely helpful in helping me get what I needed in a Kayak trailer, and their follow up was extraordinary. Malone trailer is very sturdy, assembly instructions were right on. Paper work for title and registration was sent to me asap after delivery of the trailer. Trailer tows and tracks very well.
This is a great trailer for the price.
I found the packaging and instructions pretty straightforward and easy to follow.
Once together it seems quite solid and I really like the LED lights.
The crew at etrailer.com were in constant contact and very supportive throughout the entire process and all the paperwork for registration came within a week .
Good quality trailer. Went together easy, had all the parts even though the main packaging was torn open from shippment. Got it licensed with no problems.
I will be hauling my 2019 Hobie Outback on this trailer. Also mounted a 6" tube for
my fishing poles. Will also be adding the storage box. Have not had it on the road
yet. I like the size of this trailer, not very heavy or to large.
Due to the pandemic, I waited 2 months to receive the trailer. It all arrived in good shape and I was able to assemble it easily. I was pleasantly surprised that the hardware and wiring harness had been upgraded to be more robust. I am waiting for plates and then I will see how it does on the road.
The search for a trailer to carry our two Hobie Kayaks was extensive. My main concern was finding one that could carry the two heavy (83 lbs. ea.), travel at highway speeds and be easy to use. This Malone MicroSport trailer has turned out to be great. It is easy to get our kayaks on and off the trailer at the lake. Rhino-rack Nautic roof rack carriers were installed to carry the kayaks because I wanted them to provide conforming support for the hulls. They have proven to be capable of carrying the weight of the Hobie kayaks and the kayaks can be slid on them when loading/off-loading. This was a primary concern because capacity is not listed with most carriers. Assembly of the trailer was fairly easy and I would rate it requiring moderate mechanical skill. Before doing this assembly I watched a fantastic video online, walking you through the assembly.
I would add just a couple things. Those include: 1. It would be easier to do most of the assembly on a table, until you get to the wheels. Especially true for us older folks that don't bend so well. 2. Be sure to read the wiring harness installation a few times before installation. It is tricky, but will work if you follow the instructions correctly. There is barely enough wire to connect the tail lights. I wound up having to splice some wire because of problems I had. 3. You will need to get some grommets to protect the wires going through the holes in the frame. They are not supplied with the kit. Other than that the trailer works great,very solid and have had no issues traveling at highway speeds. Attached is a photo of the trailer with the kayaks.
I love this and just told a friend about it as he's lifting a heavier canoe up on his truck. It was easy to put together, I did add a set of deep sockets to my tool collection which really helped. I am a woman in her 70s and though I have assembled a lot of stuff this was my first trailer. Very well designed, and the instructions are well written.
I love my microsport trailer. Easy to put together, a cinch to load my two hybrid kayaks, and tows great.
: Didn't work out at all considering with the j-hooks installed the trailer is way too deep to hug a wall, so I store the trailer outside with a tarp over it. If you have to store the trailer with the tongue retracted, this is a must have.
I started building the trailer yesterday afternoon and just finished it an hour ago after spending three more hours on it today. It went together very well. Institutions were very clear. I am very happy with it. I am attaching a photo.
Trailer directions straight forward. All materials identifiable, quality made and on hand. Take your time to do it right. Taking on kayak trip this weekend!
I researched a number of different trailer options for my pair of Hobie fishing kayaks. Due to their weight, proper support was crucial to prevent long term sagging. I liked the multiple options available with the Malone Microsport trailer and went with the twin bunk option.
The Microsport trailer is sturdy and easy to assemble. The instructions were detailed and easy to understand. I also took advantage of assembly video on the etrailer.com website. All this being said, I found the estimated 3 hour assembly time to be overly optimistic. (It took me about 5 hours.)
I like the fact that all of the parts are galvanized. Living in a rainy area and using the trailer to store the kayaks when not in use, rust prevention is important to me. I'm confident the trailer will last a long time.
I've already towed my kayaks over 100 miles to our vacation home without incident. The trailer towed like a dream. The LED lights are bright and easy to see from behind, even though the kayaks overhang the back of the trailer by at least 4 feet. I was not concerned about drivers behind me not being able to see my turn signals and break lights.
All in all, the Malone Microsport trailer is great, reasonably-priced trailer for kayaks and canoes. It also makes a great rack to store them on, if you have the space.
Excellent Instructions made assembly straightforward without miss-steps. In my case, 6 hours and assembled.
the instructions were well written and user friendly. The packaged bolts and nuts were numbered so the assembler couldn't get packages mixed up. The website said 3 t o5 ohurs to asssemble and I beleive it was 5 hours with hand tools. With battery or air tools it would take 3 hours. I haven't road tested it yet however it is on my agenda for this weekend
Took my wife and I 4hrs to put it together. Instructions were accurate and easy to follow. Perfect fit for our two pedal drive kayaks 12ft And 14ft. Tip- using battery powered impact wrench would have made the process much faster. Very pleased with the results and thanks etrailer for another great shopping experience.
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
1/28/2024
Only one issue otherwise a great trailer for my Blue Sky Boat Works Angler 360. The issue is 3 of the individual tail light LEDs have failed. To eTrailer support, does this require a whole tail light replacement or just the 3 individual LEDs?