bing tracking image
  1. Kayak Trailer
  2. Malone
  3. 2 Kayaks
  4. 20 Feet Long
  5. Crossbar Style
  6. 800 lbs
Malone MicroSport Trailer - 78" Crossbars - 800 lbs
Malone

Malone MicroSport Trailer - 78" Crossbars - 800 lbs

Part Number: MPG460G
In Stock
$1,799.10
Retail:$1,999.00
You Save: $199.90
Kayak Trailer
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long. Fastest Shipping and Great prices for Malone MicroSport Trailer - 78" Crossbars - 800 lbs. Read our customer reviews of Malone kayak trailer. Call 1-800-940-8924 for expert service or order your kayak trailer part number MPG460G by Malone online at etrailer.com.
  • All Info
  • Reviews (87)
  • Q & A (0)
  • Photos

Malone Kayak Trailer - MPG460G

  • 2 Kayaks
  • Malone
  • 20 Feet Long
  • Crossbar Style
  • 800 lbs
  • Extra Long Tongue
  • 6-1/2W x 13L Foot
  • Galvanized Steel

Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.


Features:

  • Heavy-duty trailer lets you haul canoes, kayaks, SUPS, or other gear
  • 78" Square crossbars accommodate most clamp-on accessories
    • Perfect for transporting watersport carriers, bike racks, and cargo carriers
  • Submersible LED tail lights and side markers are DOT-approved
  • Galvanized steel construction resists corrosion - great for fresh and saltwater environments
  • Trigger-latch-style coupler attaches to your vehicle's 2" hitch ball
    • Included safety chains act as an emergency measure if coupler disconnects
  • Leaf spring suspension absorbs road shock
  • Assembly required - includes hardware, brackets, and wiring with 4-flat plug
  • Licensing and registration paperwork included
  • Made in the USA


Specs:

  • Weight capacity: 800 lbs
    • Crossbar capacity: 500 lbs
  • Maximum boat length: 20'
  • Crossbar dimensions: 78" x 1-1/4" x 1-1/4"
    • Crossbar spread: 44" - 63"
  • Trailer dimensions: 13' 3" long x 78" wide x 30" tall
    • Trailer tongue dimensions: 90" x 3" x 2"
  • Trailer weight: 197 lbs
  • Maximum speed rating: 65 mph
  • 5-Year warranty


Coupler Specs:

  • Ball size: 2"
  • Pin hole diameter: 1/2"
  • Height (from ground to bottom of coupler): 18"

Tire and Wheel Specs:

  • Wheel dimensions: 12" diameter x 4" wide
  • Wheel bolt pattern: 5 on 4-1/2"
  • Tire size: 4.80" x 12"
    • Section width: 4"
    • Outer diameter (when inflated): 21.3"
  • Tire capacity:
    • Load range: C
    • Ply rating: 2
  • Speed Rating: 70 mph


Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.


Multipurpose Trailer Hauls Different Types of Boats and Cargo

MPG535 In Use

This heavy-duty trailer with 78" crossbars has extensive space to mount accessories like watersport carriers, bike racks, a fishing rod carrier, or a cargo box (sold separately). With a 7-1/2' long tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.


Submersible LED Trailer Lights

MPG535 LED tail lights

The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.


Plug-and-Play Trailer Wiring

CE48870 main harness to 4-way

The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.


CE48870 4-way plug

Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.


CE48870 4-way plug

When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.


Leaf Spring Suspension

MPG535 leaf spring suspension

This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.


Quick and Easy Trailer Hookup

MPG535 trigger style coupler

Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.



MPG460G Malone MicroSport Trailer - 78" Crossbars - Galvanized Steel Wheels - 800 lbs

Installation Details MPG460G Installation instructions




Customer Reviews

Malone MicroSport Trailer - 78" Crossbars - 800 lbs - MPG460G

Average Customer Rating:  4.7 out of 5 stars   (87 Customer Reviews)

Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.

by:

Good quality trailer. Went together easy, had all the parts even though the main packaging was torn open from shippment. Got it licensed with no problems.
I will be hauling my 2019 Hobie Outback on this trailer. Also mounted a 6" tube for
my fishing poles. Will also be adding the storage box. Have not had it on the road
yet. I like the size of this trailer, not very heavy or to large.

Keith W.

7/16/2020

Its been working out great! Diffidently was a good purchase. It handles my Hobie Outback kayak with ease. I can loadunload it easily by myself. I haul it with my Jeep wrangler. The trailer is lite enough that I can move it around myself. I did not install the storage box, because I feel that it needs support from the bottom. Im afraid with to many bumps on the road could cause it to fail. So I keep it inside the Jeep instead. Still Im glad I purchase the storage box, very handy.



by:

The search for a trailer to carry our two Hobie Kayaks was extensive. My main concern was finding one that could carry the two heavy (83 lbs. ea.), travel at highway speeds and be easy to use. This Malone MicroSport trailer has turned out to be great. It is easy to get our kayaks on and off the trailer at the lake. Rhino-rack Nautic roof rack carriers were installed to carry the kayaks because I wanted them to provide conforming support for the hulls. They have proven to be capable of carrying the weight of the Hobie kayaks and the kayaks can be slid on them when loading/off-loading. This was a primary concern because capacity is not listed with most carriers. Assembly of the trailer was fairly easy and I would rate it requiring moderate mechanical skill. Before doing this assembly I watched a fantastic video online, walking you through the assembly.

I would add just a couple things. Those include: 1. It would be easier to do most of the assembly on a table, until you get to the wheels. Especially true for us older folks that don't bend so well. 2. Be sure to read the wiring harness installation a few times before installation. It is tricky, but will work if you follow the instructions correctly. There is barely enough wire to connect the tail lights. I wound up having to splice some wire because of problems I had. 3. You will need to get some grommets to protect the wires going through the holes in the frame. They are not supplied with the kit. Other than that the trailer works great,very solid and have had no issues traveling at highway speeds. Attached is a photo of the trailer with the kayaks.



by:

I love this and just told a friend about it as he's lifting a heavier canoe up on his truck. It was easy to put together, I did add a set of deep sockets to my tool collection which really helped. I am a woman in her 70s and though I have assembled a lot of stuff this was my first trailer. Very well designed, and the instructions are well written.



by:

I love my microsport trailer. Easy to put together, a cinch to load my two hybrid kayaks, and tows great.



by:

Excellent Instructions made assembly straightforward without miss-steps. In my case, 6 hours and assembled.

Raymond L.

5/24/2021

Its great. Even better than I imagined. Perfect for my needs.



by:

I used this for the full 2021 season on at least 20 trips. I use it for quick trips to local lake withe kayak, works perfect, leave boat on trailer, drop on hitch and go. Cust load and unload times in half. The order was complete Fubar, misteaks by all UPS< Malone and etrailer. Extra parts, wrong parts. But I was able to get a real person at etrail and it was all straighened out. Including the title and paper work I needed to register in MA. Assembly takes a bit, but if you pay attention to the directions, it is straight forward. The issues I had was because I didnt pay attention, mounted srpings backward, and did discover till much later, then you have to disseble much and redo to fix. Just go slow and check each step before proceeding.



by:

Was able to order the item when it was not in stock. Trailer was sent directly from Malone but without a proper bill of sale. Now I'm getting the run around and have a trailer that can't be registered.



by:

Only thing I would suggest would be adding a video on your website about backing the trailer up from various angles. I still have problems with that.

Etrailer Expert

Sierra K.

11/4/2021

I found a video on our site that will help you:



by:

Great trailer for my Hobie PA12 kayak. Pricing for this item is the same everywhere so service makes all the difference - etrailer and their rep Kathy delivered. They provided excellent communications and updates on shipping and a timely receipt of the MCO made it easy to title. Overall a professional experience. Thank you!



by:

Product was as advertised, however it was missing four bolts that I had to get at a hardware store, but other than that it was fine. Service from etrailer team was outstanding.



by:

Fairly easy to assemble, works well transporting a sunfish and 2 kayaks. Good quality trailer overall



by:

Great little trailer. Perfect for what I needed...something to haul my 16 1/2 foot canoe and 13' 8" kayak. Instructions were clear and there were no components missing.



by:

Only problem is various boxes arrived over a 3 day period, assembly 3+ hours, but all parts present, trailer works well



by:

This was the perfect solution for me. I needed a way to transport kayaks with a vehicle that did not work with rooftop racking systems. Not to mention much easier to load/unload than a roof rack. Customer service is very nice any very helpful. All and all, a great experience!



by:

Sliding tongue and ability to store vertically against garage wall is great and very easy to do. Use trailer to haul a pair of 14 foot sit on top kayaks; hauls them well and is easy to load and tie down the kayaks.



by:

The trailer assembly was easy. The most difficult part, if any, was centering the support bars. We just wish it was 'Made in the USA' instead of China. etrailer expediently shipped the (4 total) packages. We were pleasantly surprised how quickly we received them. FYI: The registration documents are mailed separately. We look forward to loading up our kayaks and going fishing. Cheers!



by:

Easy to assemble with minimal tools. Grandkids Ivan and Jeanette did the work, grandpa checked mechanical integrity. Ready to go and play by the afternoon.



by:

Excellent is an understatement. Very easy to order on line. All questions answered without hesitation. Product shipped and was received in a timely fashion. Great company



by:



by:



by:



by:



by:



by:

We have used and enjoyed the kayak trailer for about a year. It is a pleasure to arrive home from a kayak trip and I just unhook the trailer and back it into the garage. No more have to lift the kayaks on and off the top of the pickup. During winter I remove the support bars, and tongue to set the trailer up on end against the wall. The only issue has been the wing nuts on kayak holders. I could not tightened them so that the holders move during transport. To solve this issue I replaced the wing nuts with lock nuts. Also the bolt head slips during the tightening of the lock nuts. Other than that, we love the trailer.



by:

This is a fabulous product! Assembly was easy, and it served us well last season with our two 14-foot kayaks. The only reason I'm not giving it 5 stars is that six of the tiny lights in one of the red taillights went out after several uses. I haven't replaced the light yet as it still has working lights, but eventually I'll have to buy a new light fixture and splice in into the wireing harness.


25
87
Show More Reviews

See what our Experts say about this Malone Kayak Trailer

  • Correct Replacement Leaf Springs for Malone Microsport Trailer
    The correct replacement leaf springs for a Malone MicroSport Trailer part # MPG460G is the 2-Leaf Slipper Spring part # e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that measure 24-5/8" long.
    view full answer...
  • Replacement Hubs for Malone MicroSport Trailer
    The Malone MicroSport Trailer # MPG460G uses a # 34823 grease seal and # L44643 inner and outer bearings like what you can find in the # BK1-100. For a complete hub assembly with the same 5 on 4-1/2 bolt pattern you can use the # CE13210.
    view full answer...
  • How to Add Bunk Boards to Malone MicroSport Trailer
    To add bunk boards to the Malone MicroSport Trailer # MPG460G you'll want 2 of the Bunk Kit # MPG561 which actually installs on the crossbars. Since the Malone trailer frames are different you'll need to source U-Bolts to install the CE Smith Bolster and Swivel Bracket Assemblies # CE10003G-4 locally as we don't have any standard-sized U-Bolts that fit the MicroSport.
    view full answer...
  • Does etrailer Kayak Carrier Fit Malone MicroSport Trailer
    Hey Norman, It does! I'm happy to confirm for you the etrailer Kayak Carrier # e98878 does in fact fit the crossbars of the Malone MicroSport Trailer # MPG460G.
    view full answer...
  • Can Winch be Added to Malone MicroSport Trailer
    Since the Malone Microsport trailer part # MPG460G has a tongue width of 2 inches you could use the tower kit part # CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part # 337HW800S.
    view full answer...
  • Replacement Dust Cap for Hub of Malone LowMax Trailer
    For the Malone LowMax trailer the correct replacement dust cap is the part # F001518.
    view full answer...
  • Recommended Kayak Trailer to Haul Two 14' Kayaks
    Well if you plan on sticking with just two 14' kayaks then the Malone MicroSport Trailer # MPG460G is the way to go. This trailer is a bit more expensive than the EcoLight, but you do get a bit more trailer for the difference. This trailer, as I'm sure you're aware, has a much higher weight capacity at 800 lbs and can haul boats up to 20' long which gives you plenty of wiggle room. If you plan on hauling more than 2 kayaks then all you'd need to do is get the 2nd Tier Load Bar System...
    view full answer...
  • Replacement Tires for Malone MicroSport Trailer
    There really isn't an advantage to moving to a higher load range so I would choose the # AM30590 over the # AM30670 to save a little money. The tires are both made by Kenda and fairly comparable to each other with the same 5-year warranty.
    view full answer...
  • Bearings, Seal, Grease Cap, & Grease For Malone MicroSport Trailer
    We do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer # MPG460G. What you will need is the following: - Bearing Kit # BK1-100 - Grease Cap # F001518 - LubriPlate Poly HP-2 Wheel Bearing Grease # L11465 The bearing kit comes with the correct bearings, races, and seal for one hub on your MicroSport trailer. Then for a grease gun and bearing packer use the LubriMatic Grease Gun # L30200 and Bearing Packer # ALL647646.
    view full answer...
  • Can I Fit Two 3 Rivers Big Fish 103 Kayaks On The Malone Microsport Trailer
    Yes, The Malone MicroSport Trailer # MPG460G will be able to carry your two 3 Rivers Big Fish 103 Kayaks. The crossbar spread on the trailer is 78 inches, and will accommodate most clamp-on accessories. The trailer has submersible LED tail lights and side marker lights. The weight capacity of the trailer is up to 800 pounds, and the crossbar capacity is up to 500 pounds. The trailer has a galvanized steel construction that will help resist corrosion. It will be great for fresh and saltwater...
    view full answer...
  • Replacement Fenders For Installing 12" Wheels and Tires On a Malone EcoLight Trailer
    We have the Aluminum Diamond Plate Fender # MPG602 which is a replacement for the standard fender that comes on a Malone MicroSport Trailer # MPG460G. This fender will allow you to fit the Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30670 on your Malone EcoLight Sport Trailer # MAL93FR You will need new holes for these fenders as your trailer and the brackets were only designed for the 8" wheels and tires you currently have.
    view full answer...
  • Will the Malone Retractable Tongue Kit Fit A CE Smith Multi Sport Plus Trailer
    The CE Smith Multi Sport Plus Trailer part # CE48870 and the Malone MicroSport Trailer part # MPG460G which is what the Retractable Tongue Kit for Malone MicroSport Trailers part # MPG494 is designed for both have a 2" x 3" trailer tongue so the Retractable Tongue Kit should in theory work as well but we have not tested this. The other option you have is a fold-away tongue kit, the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101 which we do know will work.
    view full answer...
  • Will 18 Foot Hobie Kayak Fit Malone MicroSport Trailer MPG460G
    Your 18 foot Hobie kayak will absolutely fit the MicroSport trailer with 78" crossbars, which is the following part number: - Malone MicroSport Trailer - 78" Crossbars # MPG460G I verified with Malone that this trailer will fit boats and kayaks up to 20 feet long; the trailer itself is 13 feet, 3 inches, so part of your kayak will sit behind the rear edge of the trailer, but that is completely normal. The MicroSport # MPG460G also has the capacity needed for your kayak, as its crossbars...
    view full answer...
  • Recommended Folding Tongue Kayak Carrier Trailer
    I'll start off by saying that the only trailer with a folding tongue is the Yakima EasyRider Double Decker Trailer - 14-1/2' Long - 78" HD Crossbars - 500 lbs # Y08129, which is 14 feet long and has a capacity of 500-lbs. The issue you are likely going to have going with this trailer is that it will not allow you to mount the Plastic Storage Box # MPG536, which is only designed to be mounted on trailers with A-frames; it can also be mounted on either the front or behind the front axle of...
    view full answer...
  • Is Storage Trunk for Malone MicroSport Trailers Compatible With MicroSport LowBed Trailer
    I checked with Malone and the Storage Trunk for Malone MicroSport and XtraLight Trailers # MPG481 is not a compatible accessory for the Malone MicroSport LowBed Trailer # MPG464-LB. As you mentioned, the Storage Trunk is compatible with other models, such as the Malone MicroSport Trailer # MPG460G. I have added links to video reviews for you to check out as well.
    view full answer...
  • Hardware Needed to Install the Malone MicroSport to LowBed Trailer Conversion Support Tubes
    The Malone MicroSport to LowBed Trailer Conversion Support Tubes # MAL33TR will use the same u-bolts and hardware already on your Malone MicroSport Trailer. The conversion kits work with the Malone MicroSportXT Trailer # MPG460XT, Malone MicroSport Trailer # MPG460G and as replacement tubes for the Malone LowBed MicroSport Trailer # MPG464-LB. If you have a different MicroSport trailer, this would not be the correct conversion kit.
    view full answer...
    Image 1 for
  • Will The Malone Trailer Tongue Kickstand Work With The Retractable Tongue Kit?
    The Retractable Tongue Kit for Malone MicroSport Trailers # MPG494 is designed to replace a damaged tongue on a MicroSportXT # MPG460XT, or to upgrade the tongue on a Malone MicroSport Trailer # MPG460G. Both of these trailers have an overall length of 13' 3" long, but when # MPG494 is installed, reduces the length to 8' 2". The 20' you're referring to, has to do with the maximum boat length that'll fit on the trailer. Also, the Trailer Tongue Kickstand for Malone Trailers # MPG467 will...
    view full answer...
  • Converting Malone MicroSport Trailer Crossbar Conversion to Low Bed Style
    Since you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs # MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475. It sounds like you are just looking for the lower crossbars but there isn't a conversion kit option for those bars. You can customize mounts just bolting square aluminum posts at your desired height to the frame and use the Crossbars for Malone MicroSport Trailers - 78" Long -...
    view full answer...
  • Can Spare Be Carried on Malone MicroSportXT Trailer # MPG460XT
    I attached a picture that shows where the spare part # MPG465 would mount on the Malone MicroSportXT Trailer # MPG460XT that has a retractable tongue. The crossbar spread for this is between 44 and 63 inches normally which might get slightly reduced when carrying the spare, but in most cases there's no need for that much of a spread.
    view full answer...
    Image 1 for
  • Can Malone MicroSport Trailer Use Thule Accessories
    The Malone MicroSport Trailer # MPG460G can absolutely utilize your Thule accessories because it uses standard square crossbars which are the same as those you would find on a roof rack. So using the MicroSport trailer is a lot like utilizing a roof rack that you are towing behind your vehicle. The biggest difference is this trailer is a whole lot easier to access than the top of most roofs. If you are looking for the easiest way to haul a kayak, this is it. I have added a photo a customer...
    view full answer...
    Image 1 for
  • Can I Tow a Malone MicroSport Trailer with a Nissan Altima
    What that means is that the Malone MicroSport trailer, part # MPG460G, is level when the bottom of the coupler is 18 inches off the ground. To tow the trailer level you need a ball mount with a rise. Park your Nissan Altima on level ground and measure from the ground the inner top of the receiver hitch. When we installed the Draw-Tite hitch on an Altima we measured 10-1/4 inches. You'll likely be close to this but measure your car so you're sure. Then subtract your measurement from...
    view full answer...
    Image 1 for Image 2 for
  • Availability of Crossbar System from the Malone MicroSport Trailer # MPG460G
    The Malone MicroSport Trailer # MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit # MPG475 and it comes with the mounting hardware. If you are wanting carpeted bunk boards instead we have them in the following lengths: 2' - # CE27850 3' - # CE27800 4' - # CE27810 5' - # CE27820 6' - # CE27840 These come in pairs.
    view full answer...
  • Are Malone 2 Tier LowBed MicroSport Trailer Rear Crossbars Below Fender
    That's an excellent question, and you've got a good eye because the crossbars are about an inch lower than the fenders on the Malone 2 Tier LowBed MicroSport Trailer - 78" Crossbars # MPG464-LBT. So if you wanted to lay lumber completely flat you would not be able to, but for things like kayaks it wouldn't be an issue because you could mount them with the Bunk Kit for Malone Trailers - 1 Kayak # MPG561 and they would have plenty of height to go over the fenders. If you really did want...
    view full answer...
  • Retractable Tongue Kit That Will Work With Malone MicroSport Trailers
    The Retractable Tongue Kit for Malone MicroSport Trailers # MPG494 that you mention will unfortunately not work with the Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks # MPG462G2. This kit is designed to upgrade the Malone MicroSport Trailer # MPG460G, or replace a damaged tongue on the Malone MicroSportXT Trailer # MPG460XT.
    view full answer...


< Previous
123. . .6



Do you have a question about this Kayak Trailer?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Colin H
Installed by:
Colin H
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Jessie B
Updated by:
Jessie B
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B
Employee Daron K
Edited by:
Daron K
Employee Jonathan S
Written by:
Jonathan S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.