To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This sturdy, rustproof aluminum ladder rack clamps securely to your truck bed rails and includes mounts for your crossover-style toolbox. The slotted crossbars let you easily mount and adjust accessories such as the included load stops.
Features:
Specs:
The TracONE comes with a mounting kit that allows for quick, easy installation to the factory track system in the bed of your Toyota Tacoma. Simply position the bases of the rack where indicated in the included instructions and secure them with the provided clamps. Each support base is held in place by 2 heavy-duty aluminum clamps. Torque the clamps down to ensure a substantial connection and you're good to go.
Four of the included installation clamps have pre-drilled attachment points so that you can securely mount a crossover-style toolbox (sold separately). The clamps eliminate the need to drill into your truck bed rails when installing the toolbox.
The sturdy aluminum crossbars on all TracRac truck racks feature integrated slots for mounting and easily adjusting accessories, such as the included load stops. These slots appear on both the top and bottom of the bars for the ultimate in mounting versatility.
A built-in trip strip at the front of each crossbar shields the slots from wind, maintaining the aerodynamic quality of the bars and preventing that annoying whistle you often find with slotted bars.
Included with the TracONE are 4 aluminum load stops with tie-down points. These load stops are designed to mount in the slots of the crossbars and slide along them for quick, easy adjustment.
TracRac crossbars accept a variety of accessories (sold separately) that slide and adjust for optimal placement.
The TracONE rack system is constructed of durable, lightweight aluminum. Because aluminum is lighter than steel - the material most often used for truck racks - only a small percentage of your truck's cargo capacity is taken up by the rack itself, enabling you to pack on more weight than you could with a steel system.
Even though aluminum is already rustproof, TracRac has taken the extra step of adding a dual powder coat finish to further protect the rack. The silver electrostatic powder coat (e-coat) clings to the metal surface better than traditional paint finishes for a more durable covering. The second coat is a clear finish that adds extra shine and protection from scuffs and scratches.
Average Customer Rating: 4.6 out of 5 stars (338 Customer Reviews)
This sturdy, rustproof aluminum ladder rack clamps securely to your truck bed rails and includes mounts for your crossover-style toolbox. The slotted crossbars let you easily mount and adjust accessories such as the included load stops.
The rack is great!! Looks awesome and very functional. Great for carrying 2 x lumber, wish it had rings on the posts for easier securing. I would give it 5 stars or at least 4.5, if not for the slight mounting issue. The bases that sit on top of the bed are not at the proper angle causing the arms, the sections between the base and the top cross pieces, to be leaning in slightly. The cross pieces then do not fit exactly, they can be fastened on but once tightened down, the cross pieces have a bow. I lessened the bow by adding shims to the underside of the cross pieces but I had to get longer fastening bolts. Overall great product.
Easy to install. It is very sturdy.
Arrived quick lily and was very simple to install.
Great product, love it!
It goes together easily with some patience. It’s solid and sturdy once installed. The bits that make it Tacoma-specific come in a separate box and take the place of other parts in the universal kit so there will be extras. Quality is what I expected. Fitment is glove-ish. My only complaint is the clamps are a silver color (some clear coat not bare aluminum) and everything else is black. Not a big deal. Now I can haul a canoe properly and not looking like a dweeb. Fast delivery.
These racks are built strong and light weight. Designed really well. But the Tacoma mounting brackets were not thought out well. The walls of the bed are at an angle and the threaded holes in the bracket should reflect this. It would give room for tightening fasteners. I shortened the rear bolts to make it easier to remove the rear rack. Threads were a lot tighter than any need to be. The package was opened on one end when received.
Rack has worked great hauling 20 foot lumber, 17 foot kayaks and standup paddle boards. The only issue I have had is the front cantilever bar over the cab is about 1" from the roof. If I hit a bump in the road it hits the top of the cab. I have a 2004 Dodge Ram 2500 Crew Cab short bed. Wish there was a little more clearance between the cross bar and cab.
Rack was a good fit for my 2016 Chevrolet Colorado and is solidly constructed and easy to install. Expensive but probably worth the money. No problem at all with black powder coating in screw threads, which many other reviewers complain about. I bought the Thule aero rack pads at the same time. They do not fit the rack properly and I’m disappointed that etrailer did not question the order and offer advice.
Rack is sturdy and well built. Took less than an hour to assemble and install. Maximum height of rack does not clear the top of the cab of a 2016 Ford F-350 SD Crew Cab. If you want to carry a kayak it will require foam blocks or Malone kayak saddles made for the Tracrac(not carried by etrailer). You can not carry a long ladder if used on this vehicle. Over all it is good rack though.
After using only for a couple months, the bolts continually loosened up until they sheared off leaving the rack unable to be used. Never will I buy anything of this sort again. Track rack truly went down and they sold to Thule
Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++
No fault of eTrailer - the service was exceptional. It's a great ladder rack - my only issue is that the threads needed to be chased out with a tap to avoid cross threading, which i guess is some feedback for the manufacturer. Looks great on a 2024 Sierra.
I have owned this for a year now installed on my 2023 Ford Ranger and works great. Would definitely purchase from etrailer again in the future.
Bought this Thule rack to go with a pair of Thule Hullavators. It was the perfect rack to fit our needs. Thanks to etrailer.com for their help in selecting the best rack to fit our needs.
Thule has been a trademark name to trust, I'm glad you carry their products. I think it's too early to make a definite five-star rating since poor product hardware takes time to show, they are not coated that I can see.
I received my Thule TracRac TracONE ladder rack promptly. It is very nice and installed quite easily into the bed track of my 2020 Tacoma. Hats off to etrailer - they're great. However I would make the following product recommendations to Thule for this rack:
1. There realy need to be tie cleats on the vertical supports on this rack. Cleats would make it so much easier to secure heavy loads.
2. They should offer a accessory piece which provides a flush surface to the tops of the C-clamps that mount into the bed rack. This would make it much easier to mount a tool box over the TracRack mounts and snug the tool box up as far to the front of the bed as possible - leaving more cargo room in the bed. As it is, I either have to fabricate something to do this, or mount the tool box behind the TracRac mounts - needlessly consuming valuable bed space.
Thanks etrailer!
I chose the racks because they appeared more secure than my previous setup, and they certainly are. I took my time methodically assembling things and all went well. A precious review mentioned there is little to no clearance between the button head cap screw (securing the clamp and bracket to truck rail) and the side of the truck bed; I found by rocking the tall leg I could finger tighten 'till the foot made contact, then just needed a few turns from a L shaped Allen wrench.
Installed on my Ford F250 Super Duty. Excellent construction, takes about one hour to assemble with just a few tools. Instructions are good, and all parts were in the box. Looks/fits fine on my truck. The rack is about 1" taller than the cab roof. Flat items like ladders, lumber, rigid pipe will clear, but flexible items like PVC or plywood may touch the top of the cab when travelling. I purchased this unit to transport kayaks when we travel on vacation. Canoes/kayaks clear fine if transported right-side up (as they are flat on the bottom) . But I load them upside down for better wind and noise control, and the 'tip' of the boat will just touch the top of the cab. I easily fixed this by getting a few 4"-5" stainless hose clamps at Lowe's, and a piece of 2x4, and clamp that to the front bar. Not a hill for a stepper.
I love this truck rack! I want to give it 4.5 stars but that’s not an option. The reason I’m leaving 4 stars instead of 5 is so that people will read this review for the one critical element that gives it a mark down. The brackets are made specifically for a Toyota Tacoma with the bed rails. The issue is that the bolts used to tighten the rack to the truck are so tightly wedged against the inside bed of the truck that it’s almost impossible to get to them. It’s incredibly easy to strip the head of the bolt because of the angle required to insert a tool to tighten them onto the truck bed.
For context I do not keep this attached to my truck at all times it is only used when I need to utilize the truck rack.
We purchased some ratchet style tools that allow us to put it on faster but that does not prevent the stripping of the head of the bolt used to tighten the brackets.
My recommendation to Thule And or etrailer is to include the necessary tools to attach this to the truck because there is no standard tool that works well. The ratchets that we purchased were maybe $10 each however the hex bit required is still too long even at an inch. If we could find them in half an inch that would be optimal, but my search has so far proven unsuccessful.
With that said it holds the weight limit as indicated and felt super sturdy on a 14 Hour drive loaded with roughly 450 lbs.
I just put it together last night and installed it on my tundra.
Then mounted my fly rod holder to it
It feels very rugged and it looks awesome on my truck
I received my product quickly. I was very pleased with the quality and instructions. I installed this on my truck that also has an in-bed tool box.
Although the install instructions were easily understood it would be very helpful to have another set of hands.
I do have a suggestion w/ref to the excellent hardware supplied. Unfortunately I found in several instances I experienced difficulty because there was paint in the internal threaded areas. This I was able to overcome by using the correct tap to clear the internal threads.
I love it.
Great product, easy install, easy to follow instructions. My only complaint is: getting tool box mounting kit and there is no option for getting black hardware. Who would think I wouldn't mind silver clamps with my black rack, black tool box, ladder that I painted black? Black running boards, mirrors and handles changed out from factory. I painted them, but wish I didn't need to after paying I think around $600 for the 2 products combined. They should look at sending the tool box kit to powder coat. It's literally the exact same clamp with a hole drilled and threaded in it.
This is a constructed, great looking rack that is easy to assemble too. etrailer.com’s customer service is exceptional; prompt responses to questions with helpful information and suggestions and they are knowledgeable about the products they offer. Very satisfied with this rack and other purchases I have made with them.
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.