bing tracking image
  1. Lubricants Sealants Adhesives
  2. Loctite
  3. Sealant
  4. Gasket Maker
  5. 2.7 oz
Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube
Loctite

Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube

Part Number: LT37464
In Stock
$9.43
Retail:$21.09
You Save: 55%
Lubricants Sealants Adhesives
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This gray silicone gasket maker forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases, such as air, oil, antifreeze and transmission fluid. Fastest Shipping and Great prices for Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube. Read our customer reviews of Loctite lubricants sealants adhesives. Call 1-800-940-8924 for expert service or order your lubricants sealants adhesives part number LT37464 by Loctite online at etrailer.com.
  • All Info
  • Reviews (21)
  • Q & A (0)
  • Photos

Loctite Lubricants Sealants Adhesives - LT37464

  • Sealant
  • Gasket Maker
  • 2.7 oz
  • Loctite

This gray silicone gasket maker forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases, such as air, oil, antifreeze and transmission fluid.


Features:

  • Seals joined parts in automotive systems - prevents leakage of antifreeze, air, oil and transmission fluid
  • Designed for high-torque applications
  • Exceeds manufacturers' warranty requirements
  • Won't corrode
  • Resists vibration
  • Made in the USA


Specs:

  • Quantity: 2.7-fl oz tube (80 mL)
  • Tack-free cure (time required to dry past tacky state): 30 minutes
  • Full cure (time required to reach full set): 24 hours
  • Temperature range (endurance limits of the gasket maker): -75 F to 625 F
  • Ideal gap-filling capacity (gap sizes in which gasket maker performs best): 0.001" to 0.125"
  • Maximum gap-filling capacity (maximum gap size between joined parts): 0.240"


Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps and thermostat housings



Applied as a gel to just one surface of the parts to be joined, silicone gasket maker forms a seal between them, keeping out contaminants. Silicone gasket maker resists oil and shop fluids, vibration, heat, and flexing of parts, replacing many conventional gaskets. Parts joined by this silicone gasket maker can easily be removed. The old gasket material comes off effortlessly, simplifying future disassembly and reassembly.


Because of their ability to flex and compress, silicone gasket makers work better than other kinds of gasket makers when the parts to be joined are made of different materials, which have different rates of expansion and contraction when temperatures change. They also work better than other types of gasket makers on stamped metal parts that can flex and in situations where clearances can be large.



OEM symbol

This product is OEM specified: It is approved to meet specifications of original equipment manufacturers.



491982 Loctite RTV 5699 - Grey High Performance Silicone Gasket Maker

Alternate part number: 37464

Installation Details LT37464 Installation instructions


California residents: click here



Customer Reviews

Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube - LT37464

Average Customer Rating:  4.9 out of 5 stars   (21 Customer Reviews)

This gray silicone gasket maker forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases, such as air, oil, antifreeze and transmission fluid.

by:

I used this to seal my hitch install. Ok so I over did it, but the seal Is excellent. One tube is plenty for the 2 holes drilled in the spare tire well. If fact you could do several. It just shy of a tube of toothpaste size to give some perspective.



by:

Thank you for fixing it promptly, I appreciate It. I have received the replacement.



by:

Only bad thing I have to say about it is don't know if it was shipping or a factory defect but followed directions on package and cut nozzle to desired size and started squeezing it on my transaxle and the locktite started coming out of the side of the tube. So I'm out of half the tube.



by:

Great adhesive quality upon applying , not to fast drying so u can move items around to line up holes like I was for trailer vents on side in race trailer . Haven’t used the trailer yet since thr rainy season to see if weather affects the bond but can tell u the grip is fantastic as we scrapped one of the vents accidentally against a building roof overhang and it creased the metal vent but did not displace, pull or unseal the vent! I would use this to mount anything to thr exterior of my trailer without worry!



by:

I received my product very quickly and in excellent condition! Every time I have ordered from E-Trailer, I have been extremely satisfied!

David P.

7/16/2016

I used the product right away after I bought it... havent used it lately. It worked excellent for me. .



by:

I used this product to repair a leaking auger gearbox on my snowblower. It was critical that when repairs were completed the two part gear case be sealed completely. The directions were simple/straightforward and the product was easily applied. I used the snowblower all winter and the gearbox seal was perfect.



by:

Worked and fit just like described, good deal.



by:

The product was shipped as promised. Product worked fine and was of satisfactory quality



by:

We use this product for creating gaskets where needed, and until now had no reasonably-priced supplier. We really appreciate your pricing and service. We had our last order of six units in three days!



by:

No problem !



by:

Great product! Great service!!



by:

Exactly what I needed for the job I was doing.



by:

Excellent product; can't find on store shelves. Pricing from this supplier is great.



by:

great stuff seals better then other bra nds



by:

Rose was very helpful.

Thanks



by:



by:

works fine. Good service.



by:



by:



by:



by:


21
21

See what our Experts say about this Loctite Lubricants Sealants Adhesives

  • Can Thule Square Crossbars Be Installed on Truck Bed Camper Topper
    For your application I recommend checking out the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B as it comes with a track system and aero-style crossbars that help to cut down more on wind noise and drag than the classic square crossbars. Another reason why is because Thule doesn't have any type of system compatible with your crossbars. This comes with all of the hardware needed for the installation as well as coverings for the holes to help prevent any leakage when it rains,...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • How Does Rhino-Rack Aero Bar Roof Rack for Camper Shells Attach to Trailer Roof
    The Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B installs by drilling holes into your roof and anchoring the tracks on the inside of your Little Guy Silver Shadow. You'll want to use a sealant like the Loctite Silicone Gasket Maker # LT37464 to help prevent water getting inside your trailer. The system itself has a 220 lb weight capacity but you'll want to proceed with caution because the roof of your trailer will be the limiting factor for your application. You can actually...
    view full answer...
  • Roof Vent with 110V-AC Powered Fan for 6 x 12-Foot Diamond Cargo Trailer
    Most square trailer roof vents are a common size, 14 x 14, and they require a roof opening of 14-1/4 x 14-1/4-inches. If your vent measures this approximate size then you can safely presume you have one of these standard-size roof vents. We do offer a 110V-AC powered fan in this size that is shown on the linked page, part # V2128SP-01 from Ventline. This vent features a manual-lift lid, on/off switch, insect screen and it also includes an internal trim piece (the garnish) for a clean installed...
    view full answer...
  • Power Consumption of Fan Motor in Ventline 110-Volt Trailer Roof Vent # V2128SP-01
    The 110-volt A/C motor in the Ventline Trailer Roof Vent # V2128SP-01 will draw a maximum of 0.77-amperes of current. This vent fits roofs from 2-1/8 to 3-1/4-inches thick and requires an installation kit # 344270KITW which includes screws and urethane sealer. I also recommend that after installation you also apply silicone sealer like # LT37464 to the exposed screw heads and mounting flange on the trailer's exterior.
    view full answer...
  • Recommended Path to Connect 4-Way Wiring Harness on 2012 Mitsubishi Outlander to 7-Way ETBC7
    I can help you route your 4-way to the # ETBC7. First thing I would search the cargo area where your wiring harness connector is for a factory grommet to get the 4-pole through. If there is no grommet the best thing to do is to drill a small access hole to run the wires through. I recommend using the snap bushing grommet # SWC8055 and instead of splicing into your vehicles harness (voids the warranty), I recommend making the splice and reconnection in the 4-way to 4-way loop # HM48145....
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Recommendations for a 2017 Jeep Cherokee Latitude
    For your 2017 Jeep Cherokee Latitude Curt hitch # C13172 is a great option. Once installed you will only be able to see the receiver portion of the hitch. Installation of this hitch is not difficult and I am confident you can perform the installation at home. The bolt leaders do indeed come with the hitch. I have included links to the instructions and a video showing an example installation for you. Installation required 8mm, 10mm, 13mm, and 21mm sockets, a 3/4 inch socket, tape measure,...
    view full answer...
    Image 1 for
  • How to Install the Blue Ox Tail Light Wiring Kit on a 2017 Jeep Wrangler
    In order to install the Blue Ox Tail Light Wiring Kit part # BX8869 in the back of the taillight housing on your 2017 Jeep Wrangler you will need at least 1" of space in order for the bulb and socket kit to work. I did some research and looked at a few of the taillight assemblies for your Jeep and believe you should have absolutely no problem using this kit. 1) Starting in the engine compartment of the towed vehicle, run the 26 ft. harness through the fire wall, under the driver's side...
    view full answer...
  • Does Better Bath Single Bowl RV Kitchen Sink Come With Mounting Hardware
    The Better Bath Single Bowl RV Kitchen Sink - 25" Long x 15" Wide - Stainless Steel # LC421572 comes with the same mounting hardware you pointed out comes with sink # LC385313. I also recommend using the Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube # LT37464 to seal the sink to the underside of the counter.
    view full answer...
  • Thule HideAway Awning Installation on 2015 Forest River R Pod
    The Thule HideAway Awning - Direct Mount - Waterproof - 80 sq ft # TH490011 will mount directly to the side of your 2015 Forest River R-Pod trailer with the included mounting brackets and hardware. It will require drilling directly into a stud/support location to give you the weight support needed. I recommend using silicone in the locations where you install the brackets as outlined in the attached instructions. You can use either # 0160297 or a silicone gasket maker like # LT37467...
    view full answer...
  • Gasket Availability for the Bargman Triple Tail Light # 47-84-009
    The best recommendation I could make would be to use a gasket maker like the Loctite Silicone Gasket Maker part # LT37464. I wish we carried a gasket specifically designed to work on the Bargman Triple Tail Light # 47-84-009 that you referenced but we do not. I have spoken to my contact at Bargman about this before and they told me that gaskets aren't used for these assemblies because if they are used they can trap condensation in the lens and it won't dry out. Without the gasket air...
    view full answer...
  • Is Drilling Needed to Install a Powered Trailer Wiring Harness in 2015 Chevrolet Malibu
    Routing the 12V power wire for a powered trailer wiring harness like the Tow Ready T-One # 118602 may require some drilling. Often there will be existing holes and/or wiring grommets that can be used but in some instances drilling a new hole will make the installation process easier. You just want to be very careful to check the area where you intend to drill to ensure there are no critical components behind it, such as other wiring, a brake line or a fuel line. If you do end up drilling...
    view full answer...
  • RTV Sealant Recommendation for Oil Seal for Dexter Axles
    The Unitized Oil Seal # 10-51 would require that you apply RTV like part # LT37464 to the outer diameter of the seal before you install it per Dexter's seal installation instructions. This seal is designed as a replacement for Dexter 9K and 10K axles.
    view full answer...
  • Mounting Hardware is Not Holding the Lend-a-Hand # AM-200 on a 2011 Rockwood Ultra Lite
    Yes, it sounds like you need to install some anchors for your Lend-a-Hand # AM-200 or simply remove all of the hardware and move the mounting location up or down a few inches to avoid using the same holes. If you do move the Lend-a-Hand then you want to make sure that you are installing the screws into a stud and that you patch up the previous mounting holes with sealant like part # LT37464. It might be easier to move the hand rail location but since both options are fairly easy it really...
    view full answer...
  • Trailer Roof Vent Installation Kits and Sealers
    The Ventline trailer roof vent # V2092SP-28 does not include mounting screws or sealant. The reason is that trailer roofs vary in their materials and thickness and if hardware were to be included it would not work for each and every application. But we do have vent install kits and sealants to help you get the job done. I linked a video to help too. We have vent installation kit # 344270KITW for trailers with a metal roof; this includes both hardware and sealant. We also have a kit for...
    view full answer...
  • Canoe Carriers for SportRack SR1020 Roof Rack on 2009 Aliner Classic Pop-Up Camper Trailer
    The SportRack Pop-Up Camper Roof Rack # SR1020 will work on pop-up camper trailer roofs that have a 90-degree edge (not curved or rounded) and that are up to 85-1/2-inches wide. The four rack feet bolt permanently to your roof using included hardware. I recommend using a silicone sealant like # LT37464 during the installation to prevent any water from entering the camper. You will want to check the height of the skylights on your roof to ensure that the 3-inches of height added by the...
    view full answer...
  • Installing Hopkins Smart Hitch Backup Camera Without Cutting Through Floor
    If you are referring to the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002, depending on your vehicle, you may be able to go through the firewall which you can drill in order to run the cable from the monitor back to the camera without going through your rubber floor. Anytime wiring passes through the firewall, the opening should have a grommet # SWC8055 and sealant # LT37464 to prevent the metal from wearing away the wire insulation and possibly causing a short...
    view full answer...
  • Can a Roof Cargo Box Have Thule Hardware Installed to Fit Wider Crossbars
    We have recommended in the past for people in similar situations as yours to modify their boxes and install the Hardware part # TH04997 which has much wider U-bolts compatible with factory and aftermarket aero style crossbars. You basically would have to drill new holes in the box and then use all of the included hardware to secure the mount kit to the box. You will want to space the holes that you drill in the box the same distance apart as the crossbars of your roof rack. For sealant...
    view full answer...
  • Mounting Method for Stromberg Carlson Extend-A-Shower RV Shower Curtain Rod EXT-3542S
    The Stromberg Carlson Extend-A-Shower RV Shower Curtain Rod # EXT-3542S weighs under 3-lbs and even with the small additional weight of the shower curtain itself should be fine for installation in your shower even if a wall stud or other structural member is not available at the mounting point. It would obviously be better to have such a mounting point to install just about anything on an RV but the included 2-inch stainless steel mounting screws will work for most applications. I would...
    view full answer...
  • Does Ventline Exterior Wall Vent for RV Range Hood V2111-13 Have a Locking Damper
    The Ventline Exterior Wall Vent for RV Range Hood, part # V2111-13 in white and part # V2111-55 in black, do have pivoting latches that lets you lock the damper closed when not in use. This is a great feature for storage periods and prevents critters from entering the RV. Installation requires either re-using your RV's existing vent hardware or supplying new screws such as # 31071. You will also need a sealant to complete the install. We offer pure silicone sealant that remains flexible...
    view full answer...
  • Does Ventline Exterior Wall Vent for RV Range Hoods V2111-55 Include Insect Screen
    The Ventline Exterior Wall Vent for RV Range Hoods # V2111-55 does not include a screen to block insects but it does have a lockable damper panel that lets you secure the damper when the range hood fan is not in use, such as during storage periods. This feature helps stop drafts that can cause your HVAC system to turn on unnecessarily. We also have this item in black as part # V2111-55. Installation requires hardware such as # 31071 (ten screws are needed) as well as a silicone rubber...
    view full answer...
  • Damper Operation & Installation of Ventline Exterior Wall Vent for RV Range Hoods V2111-55
    Yes, the internal damper in the Ventline Exterior Wall Vents for RV Range Hoods, parts # V2111-55 in black and # V2111-13 in white, opens automatically when you turn on the exhaust fan in your RV's kitchen range hood. These vents also have a locking feature for the damper that lets you keep it secured in the closed position. Two swiveling latches, one on each end of the damper panel, allow you to secure the damper for off-season storage or when in extreme temperatures when you will want...
    view full answer...
  • Comparison of Trailer Wiring Harnesses Available for the 2011 Hyundai Santa Fe and Routing the 4-Way
    As far as towing a trailer goes, there is not an advantage or disadvantage between the Replacement OEM Tow Package Wiring Harness, # 118258, and the T-One Vehicle Wiring Harness, # 118415, for the 2011 Hyundai Santa Fe. Both harnesses are capable of the same amount of amperage for trailer lighting. The difference between these harnesses is that if you have a damaged factory wiring harness the Replacement OEM Tow Package Wiring Harness, # 118258, will be the correct replacement for your...
    view full answer...
  • Can Trailer Wiring from Europe be Used on a 2011 Mercedes-Benz E-350 Wagon
    Thank you for the purchase of the Curt Trailer Hitch # C11189 for your 2011 Mercedes-Benz E-350 Wagon. I checked out the Jaeger kit that you referenced and unfortunately it will not fit your vehicle. The wiring is specific to European models and the connector on the end has too many pins on it. If you look at the comments underneath you can see that someone from the States purchased it not that long ago and it wouldn't fit their model. We haven't installed the Curt Powered Tail Light...
    view full answer...
  • Light and Color of Optronics Thinline Amber LED Clearance Light
    Hey Jim, thanks for reaching out! I'll answer your questions about the Thinline LED Trailer Clearance or Side Marker Light w/ Bracket # MCL67AB in order so it's easier to keep track of everything. 1 - The lens color is a standard amber color. The first photo on the product page (which I'm attaching here) is a great example of what it looks like. 2 - Yes, this is designed for 12V DC power. 3 - This bas is just a plastic base, but it doesn't come with a gasket because it's a surface mount...
    view full answer...


< Previous



Do you have a question about this Lubricants Sealants Adhesive?


Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Michael H
Expert Research:
Michael H
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.