bing tracking image
  1. Lubricants Sealants Adhesives
  2. LubriMatic
  3. Grease
  4. Brake and Bearing Grease
  5. Standard Bearing Grease
  6. 14 oz
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
LubriMatic

LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge

Part Number: L11465
In Stock
$23.53
Lubricants Sealants Adhesives
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life. Fastest Shipping and Great prices for LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge. Read our customer reviews of LubriMatic lubricants sealants adhesives. Call 1-800-940-8924 for expert service or order your lubricants sealants adhesives part number L11465 by LubriMatic online at etrailer.com.
  • All Info
  • Reviews (89)
  • Q & A (0)
  • Photos

LubriMatic Lubricants Sealants Adhesives - L11465

  • Grease
  • Brake and Bearing Grease
  • Standard Bearing Grease
  • 14 oz
  • LubriMatic
  • Petroleum-Based
  • Polyurea - Conventional

This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life.


Features:

  • Resists high temperatures for wheel bearings for all disc and drum brake applications
  • Formulated with polyurea for improved bearing protection and longer electric motor life
  • Made in the USA


Specs:

  • Quantity: 14-oz cartridge
  • Application: wheel bearings for disc brake and drum brake applications
  • NLGI grade: #2 (about the consistency of peanut butter)
  • Drop point: 500 degrees F


11465 Plews & Edelmann LUBRIPLATE Poly HP-2 from LubriMatic Wheel Bearing Grease for Disk and Drum Brake Applications - 14-oz Cartridge





Customer Satisfaction Score:


Customer Reviews

LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge - L11465

Average Customer Rating:  4.8 out of 5 stars   (89 Customer Reviews)

This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life.

by:

Easy ordering and product worked well repacking bearings on travel trailer.



by:

Great Grease! I prefer this in trailer bearings that do not need marine grade grease.

I cannot buy this grease in tubes locally and only one store sells this by the small can. I made sure recently to purge the unknown grease out of my camper bearings and replaced with this brand as I know it and trust this product. I wanted to get tubes for my now dedicated grease gun for my trailers and etrailer was the only way to go.

etrailer has the best price and ordering tubes allows me to put the same bearing grease into my Bearing Buddies as I packed my bearings with.

Matt W.

1/27/2015

Still working fine. Holds up the way I expect.



by:

Great "tacky" wheel bearing grease...holds on bearings well.....5-stars!



by:

THIS GREASE IS SUPPOSE TO BE VERY GOOD. DOWNSIDE IS AVAILABILITY. BEING A POLYUREA CONVENTIONAL TYPE GREASE IT NOT COMPATIBLE WITH THE MORE AVAILABLE GREASE AT AUTO PART STORES, SO YOU BETTER KEEP A CARTRIDGE IN YOUR BACK POCKET AT ALL TIMES. BUYING FROM E-TRAILER IS A PLEASURE.



by:

etrailer was where I found the Lubrimatic grease for my trailer bearings. The price was right and the shipping on a small order was only 4.99. This arrived in 3 days with standard shipping. Thanks for the great turnaround time.

Foster G.

8/24/2018

very good



by:

We recently placed an order for several items. However, an issue arose with an out of stock item. Ensuring that the order would not be delayed, the etrailer team substituted a comparable product. This makes for great customer service. Sometimes the test of a company is how they respond to issues that arise. All of the staff that we have dealt with have provided excellent service. They definitely get five stars from us.



by:

Have used this grease for years, stands up good to water. It is all I use in the bearings on my off road trailer, never had a problem.

Mark E.

8/19/2015

still works great, no problems at all



by:

Order arrived very quickly. Placed on Friday, arrived on Tuesday from Mo to Pa. Items were packed well and arrived in good condition. Upon initial inspection all items appear of good quality. Ordered tires, brakes with backing plates, hubs ,seals and grease. Haven't installed any items yet, but I am sure I will have no issues. Free shipping is a plus. Additionally unlike other free shipping offers that are out on the back burner for a week, order was processed and shipped promptly. I have recommended etrailer to friends and would highly recommend them to anyone.



by:

Works great for trailer bearings, thanks, jeff

Jeff B.

3/26/2017

Its working great, no bearing failures, thanks !!



by:

All the products I purchase from etrailer (most recently trailer bearing grease and five pin trailer plugs) are always high quality and do the job they are designed to do. The prices are reasonable also.



by:

Love it. Use it for wheel bearings.

Dave W.

8/23/2021

Great Product. No Problems.



by:

I purchased to grease a trailer that I just purchased. Having never done this before, I had no idea how much I needed to do all of the EZ-Lube wheel bearings. I bought one tube and this got me through two wheels. I ended up ordering two more tubes that I'm now waiting on.

I think half a tube per EZ-Lube wheel. So two tubes for a trailer with four wheels. I ordered an extra tube to make sure.



by:

Before I ordered any grease from anyone... I checked around on-line for information on what I should be looking for, as far as specifications and usage. Then I checked to see what etrailer. had. I've ordered from etrailer several times before and been very satisfied with the products and the service. This product more than met the requirements I wanted, and I learned from my very first order, the people at etrailer are paying attention! I can't see what this stuff is actually doing... so, I have to believe in who is selling it.



by:

Had ordered brakes for my travel trailer and in a few days I got them. No problems with the packaging and I got free shipping. Service was excellent and I would highly reccomend etrailer for parts. I would definitely buy from them again.



by:

Bought this product to use for greasing the wheel bearings on my Grand Design 5th wheel. Product had good reviews. To soon to evaluate. Will respond as I get some miles on the product.



by:

Have problem with new wheel bearing. I checked both on the spindle before installing in the hub/drum. One was OK the second would not go. Saved if you would need to see it. The rest of the installation went well. Good delivery time



by:

A must have for disk brake users. Other grease types leak out the seals where this stuff stays put



by:

Great product and very "sticky" which is exactly what I want for hard use applications. I originally bought this to repack wheel bearings but was so impressed with it that I now keep it in my grease gun to lubricate my farm equipment.



by:

This grease has worked very well for my salt water boat trailer for many years.
Quick on time delivery. The staff is very helpful and knowledgeable .



by:

Nothing bad to say about product. I use it specifically for greasing our travel trailer bearings.



by:

This is the wheel bearing grease recommended by pop up camper maker. The grease tube fit my grease gun perfectly making my grease job very easy and neat.



by:

Worked as designed. Easy way to install new dust caps and minimize damage to cap when installing. Used wood for years ...... but this is way easier to store in your tool box.



by:

Good, high quality grease for my trailer hubs.



by:

Product works great,had no leaking from my grease gun unlike some others I have used. Reccomend this product.



by:

Great well organized place to get trailer stuff from...Thank you


25
89
Show More Reviews

See what our Experts say about this LubriMatic Lubricants Sealants Adhesives

  • Is LubriMatic Marine Grease Compatible With LubriMatic 11465
    Hey Malcolm, The LubriMatic Marine Trailer Wheel Bearing Grease # L54FR isn't going to be compatible with the 11465 grease you were using. That said, I do have some good news as that grease is in fact still made and available. What you need is the LubriPlate Poly HP-2 Wheel Bearing Grease # L11465.
    view full answer...
  • Bearings, Seal, Grease Cap, & Grease For Malone MicroSport Trailer
    We do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer # MPG460G. What you will need is the following: - Bearing Kit # BK1-100 - Grease Cap # F001518 - LubriPlate Poly HP-2 Wheel Bearing Grease # L11465 The bearing kit comes with the correct bearings, races, and seal for one hub on your MicroSport trailer. Then for a grease gun and bearing packer use the LubriMatic Grease Gun # L30200 and Bearing Packer # ALL647646.
    view full answer...
  • Replacement Electric Brakes and Components for a 2000 Coachman Catalina Trailer
    We will be able to find you the electric brakes and other components that you will need for your Coachman Trailer. We will need some additional information to make sure that you will be able to select the correct products for your trailer. First, we will need to know what your axle rating is on your trailer. Most axles will have this information printed on a label that is attached to the axle tube. By chance is this information is missing, then the inner and outer bearing numbers or...
    view full answer...
    Image 1 for
  • Recommendation on Brake Assemblies and Drums for the Timbren Axle-less Suspension
    For the Timbren Axle-Less Trailer Suspension, # ASR35HDS02, Timbren recommends the Dexter Trailer Hub Assembly, # 8-201-9UC3-EZ. These Dexter hubs measure 12 inches in diameter and 2 inches wide and have a 6 on 5-1/2 inch bolt pattern. These hub assemblies include the E-Z Lube dust cap that will allow access to the E-Z Lube grease Zerk in the Timbren spindles. This comes pre-greased. I recommend the etrailer hubs, # AKHD-655-6-EZ-K. These hubs have all the same features that you will get...
    view full answer...
  • Replacement Bearings for 4,300 Pound Axle on 2008 Airstream 19CB
    For replacement bearings, races, and seals on your 2008 Airstream 19CB you need the following: -Bearings: Inner # 25580 Outer # LM67048 -Races: Inner # 25520 Outer # LM67010 -Grease Seal: # RG06-070 For grease you can use the LubriPlate Poly HP-2 Wheel Bearing Grease # L11465. If you need a grease gun as well we have the # L30200 along with the # L70025 to help pack the bearings.
    view full answer...
  • Needing Wheel Bearing Kits for Lippert 5,200 Lbs Axles
    We carry two different wheel bearing kits for 5,200 Lbs axles. The difference between the two set is in the inside diameter of the grease seals. One kit, # BK3-300, uses a grease seal the measures 2-1/4 inches I.D. The other kit, # BK3-310, has a seal the measures 2-1/8 inches I.D. You will need to measure your current seals to see which kit will work for your application. Both kits will include bearings, seal, and race cups. One kit per wheel. I also recommend LubriMatic Bearing Packer,...
    view full answer...
  • What is the Length of the Trailer Idler Hub Assembly # TA88545-2
    I went out to the warehouse and found that the total length of the Trailer Idler Hub Assembly # TA88545-2 is 4-1/4". If you have a straight spindle with a diameter of 1-1/16" then the 2 # L44649 bearings should fit just fine, just note that the grease seal has an inner diameter of 1.50" so you will need to make sure that corresponds to what you have. If all of that checks out then this hub will fit! Always use the same grease that you used the last time that everything was greased. Different...
    view full answer...
    Image 1 for
  • Recommended Grease For Dexter Trailer Idler Hubs
    The grease used on The Dexter Trailer Idler Hub Assembly # 34822545BX, is The LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge # L11465. This grease resists high temperatures, and has a drop point of 520 degrees F. I attached a review video link below.
    view full answer...
  • Needing Bearing and Seal Replacement for Lippert Axle
    I found a bearing and seals that will fit your Lippert Axles. According to the manufacturer on the 5,200 lbs axles, the outer bearing number is # LM67048, the inner bearing is # 25580 and the grease seal will be 10-36, # RG06-070. Now, before you order your parts, you will need to remove the wheel and hubs to inspect the bearings to see if the bearing numbers are match to the ones listed above. If they match then you will need # BK3-300. This is a bearing kit that will include both inner...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Hub Assembly for 1 Inch Axle Spindle
    We have the complete assemblies available with the races installed, but you still will need to install the bearings and seal to attach to your spindle. I recommend the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # AKIHUB-440-2-2K or the 5 on 4-1/2 bolt pattern # AKIHUB-545-2-2K. These will both fit 1 inch spindles and have all the needed parts, so you just pack the bearings and install on your spindle. For grease use # L11465 for grease packer use # PTW1218.
    view full answer...
  • Recommended Grease For Item # C16070
    Your Curt A30 5th Wheel Trailer Hitch Item # C16070 has a zerk fitting on each side of the jaw. A high temperature wheel bearing grease can be used for lubrication. I recommend Item # L11465.
    view full answer...
  • Does AKHD-655-6-EZ-K Pre-Lubed 3500 lb Hub Drum Need Additional Grease Before Installation
    The # AKHD-655-6-EZ-K hub would arrive with the grease seal, the races and the inner and outer bearings installed. The bearings are already packed with grease, so the hub is ready to install. I'd recommend using some additional all-purpose marine wheel bearing grease like # L11465, and smearing a good coating on the spindles as some extra added insurance. I've linked to a product description video featuring this hub/drum. All this being said, since this is for a boat trailer I'd instead...
    view full answer...
  • Needing Brakes, Hubs, Bearings and Seals for a set of AL-KO Axles with 10 X 2-1/4 Inch Brakes
    The brake assemblies that I recommend to replace your AL-KO brakes are # AKEBRK-35R and # AKEBRK-35L. Theses are the brake assemblies for both the left and right sides of the axle. I like these brake assemblies over the others we carry for two reasons, the shoe pads are machined rather than clipped and the magnets on theses brakes are thicker. The machined shoe pad will wear better and are sturdier than the clipped end shoe pad. The thicker magnet will wear better and in turn last longer...
    view full answer...
    Image 1 for
  • Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter Axle
    You can confirm the weight rating of your Dexter axle by removing one hub and pulling its bearings. The included photo shows how part numbers usually appear on bearings. The specific bearings used will tell you the axle's weight rating. Just refer to the linked article that lists the bearings commonly used for various axle weight ratings. A new hub must use the same bearings as the original hub in order to fit on your spindles. A 3500-lb axle commonly uses bearings # L68149 and # L44649...
    view full answer...
    Image 1 for Image 2 for
  • How to determine what size hub I need?
    To figure out what size hub your are going to need for this axle we are going to need the wheel bearing numbers off the axle you are wanting to change the hub. The numbers can tell us size the spindle on the axle and tell us what the weight capacity of the axle. If by chance the bearing numbers are missing or worn off, then the attached picture will show you what measurements are needed to find the correct bearings. The inside diameter (I.D.) of both inner and outer wheel bearings or the...
    view full answer...
    Image 1 for
  • Replacement Idler Hub for Older Trailer with 0.99-Inch Spindle Diameter
    A replacement hub for your older trailer must use the same bearing set as the original hub. This ensures the hub will fit properly on your spindles. The hub kit you referenced, part # AKIHUB-440-2-1K, uses bearing # L44643 as its inner and outer bearing. This bearing's inner diameter, which fits over the spindle shaft, measures 1.00-inches so it will fit your 0.99-inch spindles as long as they are straight, not tapered. Another kit that will work is part # AKIHUB-440-2-1K which uses the...
    view full answer...
  • Is High Temperature Grease Okay to use with Bearings
    You can absolutely grease like the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications # L11465 that is designed for high-temperature requirements. This LubriMatic grease is specifically designed to resist high temperatures and would be a great option for packing your bearings.
    view full answer...
  • Parts Needed When Adding Brakes to a 3,500 Lbs. Axle
    With a 3,500 pound axle you'll need brake flanges with a 4-bolt pattern like # 4-35. Your trailer may already have these and if so that's good. The brake flange needs to be welded to the end of the axle to support the brake assemblies. It will need to be welded perfectly straight for your brakes to function properly so the work should be performed by a certified trailer shop. For brake assemblies, I recommend # AKEBRK-35-SA Left and Right Side Brake Kit. This kit will include 2-10 inch...
    view full answer...
    Image 1 for
  • What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup Trailer
    We have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle. This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub. If you do not have grease zerks at the end your axle spindles, then...
    view full answer...
  • Timbren Axle-less Suspension for Off-Road Tear Trailer
    Yes, it looks like you've made a great choice. The Timbren Axle-less Suspension # ASR1THDS03, will be ideal for an off-road teardrop trailer. This system is rated at 2200 lb. and will make off-roading much more comfortable as the rebound springs will minimize rattle and bottoming out. The hubs you selected, # AKHD-545-35-EZ-K and the brake assemblies, # AKEBRK-35-SA are a good match. The Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer...
    view full answer...
    Image 1 for
  • Does Titan Disc Brake Kit And Actuator Come With Oil Bath Or Grease Hubs
    The Titan Disc Brake Kit and BrakeRite Electric-Hydraulic Actuator part # T4843800 comes with Titan Disc Brakes that come with bearing protectors. The bearings still need to be greased with bearing grease like part # L11465 however the bearing protectors have a grease fitting to make it easier to grease the bearings. If all the bearings match up to your current oil bath hub then you shouldn't have an issue with the Titan Disc Brake Kit part # T4843800. You do want to make sure to wipe...
    view full answer...
    Image 1 for
  • How To Install New Bearings and Seals on a Trailer Hub/Drum
    In order to install the bearings, races, and seals that come with the Titan 5 on 4-1/2 Complete Hub-and-Drum Assembly part # T1544500042 you can use the video I have attached for you on the Trailer Hub and Drum Assembly part # AKHD-545-35-K. This is a different hub/drum yes but the install process will be the same. Please note that in order to properly grease the bearings you are going to need a bearing packer like part # L70025 as well as some grease like part # L11465. The Installation...
    view full answer...
  • Grease Fitting Locations for Curt A20 Fifth Wheel Hitch
    The zerk fittings for the Curt A20 hitch part # C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out. Curt recommends high pressure grease like the part # L11465. If you need a grease gun we have part # L30200.
    view full answer...
    Image 1 for
  • Do You Still Need To Add Grease to etrailer Easy Grease Trailer Hub and Drum Assembly
    Correct, the pre-greased hubs we offer such as the Easy Grease Trailer Hub and Drum Assembly part # AKHD-655-35-EZ-K will still require additional grease to be added once they are secured to the spindle. The pre-greasing simply means the bearings have already been packed for you. They come with a petroleum-based grease which is most common so you could use part # L11465 although the color may be a bit different.
    view full answer...


< Previous
123. . .5



Do you have a question about this Lubricants Sealants Adhesive?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Michael B
Installed by:
Michael B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.