Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your Ford F-150 and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on this 2013 Ford F150, we'll be installing the WeatherTech no-drill mud flaps for the front and rear, part number WT110002-120002. Before we start our install, we're going to go ahead and turn the wheels to one side to make it easier to get to the fasteners. Now there are two fasteners on the bottom edge of the fender wells towards the bottom. We'll go ahead and remove these two screws. At this point, it would be a good idea to have a test fit of the mud flap against the fender well to see how it fits against it. You also want to make sure the attachment point on top is in its unlocked position.
Once you know how it fits up against the fender well, we can go ahead and reinstall the existing factory fasteners. The mud flap is marked with and indicator of locked and unlocked position. We'll press it against the fender well, and then take the included Allen key and go ahead and tighten down the screw. You'll see it slide over to the locked position as it grabs the edge of your fender well and tightens down. We'll go ahead and continue tightening down until it's nice and snug.
Then we'll go ahead and tighten down the other two screws on the bottom. With that, our driver side is done and we can go ahead and repeat the same process over on the passenger side. Now we can move on to the rear flaps. The first thing we need to do is go ahead and locate the two fasteners that are at the bottom of the fender well. There are two plastic rivets that we have to remove.
We'll start them off with a screwdriver. Then we'll pull the remainder out with needle nose pliers. With those pulled out, we can go ahead and take the mud flap and do a quick test fit to see how it fits up against the fender well. So now I'll take the new hardware that comes with the mud flap, the stainless steel screw and washer. We'll run it through the outside to the inside, and on the inside we'll install the black flange nut.
We'll install two of these through two holes and leave them together loose. Next, we'll work with the fastener up on top. Now if you'll notice, there's an indicator built in onto the mud flap, which is a locked and unlocked position. We'll go ahead and push it up against the edge of the fender well, and then using the provided Allen key, we'll go ahead and tighten it down. When we tighten it down, you'll see the indicator move over to the locked position. Once it's there, go ahead and tighten it down further until it's nice and snug. With those few steps, our mud flap is already installed. We'll go ahead and repeat the same process for the passenger side. Okay, and with that, that will finish it for our install of part number WT110002-120002, on our 2013 Ford F150.
Average Customer Rating: 4.8 out of 5 stars (1380 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.My initial order was placed in error when I transposed a number. However, the service to exchange the item and receive the correct model was excellent and very timely! Great customer-based company and my after-market parts fit like a glove!!! Thanks so much!!!
The WeatherTech FIT My F150 PERFECTLY. Literally 10min to install. This product MADE IN USA, makes me PROUD to enhance my truck with AMERICAN INGENUITY.
installed on a 2012 F150, excellent fit and finish, easy no drill job.
Fits great , installed in minutes .
Excellent product, easy to install, had no problems, really help my F-150 Ford. Feel real secure after installed.
Did not installecause of gap it would leave at top between flap and fender. Item was suppose to be custom fitted.
Once again top notch. Thanks
These were super easy to install and function as expected.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Weather tech always fits and looks good
Good quality. Arrived quickly
Easy to install.
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul A.
1/9/2015
Up date , One year ago I had the bottom of my doors painted because of no mud flaps the paint was wearing off the front cab corners and door . After installing these mud there has been no new paint damage and the flaps look as good as the day I installed them .