To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your Ford F-150 and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Aiden here with etrailer. Today, we're gonna be taking a look at and showing you how to install these WeatherTech no-drill mud flaps for the front of our 2023 Ford F-150. The fronts are gonna help with kicking rock up onto your paint, keeping dirt and debris clear of that painted surface, and the material is going to be a thermoplastic resin. It's a bit more of a rigid material, but still has some flex to it and it's gonna match all the black plastics on your vehicle really well. And on the back we can see how it's a no-drill installation.
On our F-150 today, it's using factory mounting locations at the bottom on the inside edge. But speaking of the no-drill installation, you're probably wondering what that looks like. The fronts are gonna be pretty straightforward here and mostly use factory hardware, so let's check it out. That factory hardware will be two hex head screws that we can loosen up and fully remove with a seven millimeter socket or wrench. Hang onto these because they will get reused later.
Now, this is pretty loose right now, but there's still one push pin fastener underneath. It's pretty far recessed, but you might just find better luck pulling straight out (fastener clicks) and releasing both the push pin fastener and this plastic clip. This whole piece is actually not gonna get reused, so if you mangle it in the process, that's fine. Just toss it in the trash. Now, there's gonna be one more factory screw that we can remove with a 10 millimeter socket.
Now, if yours is anything like ours, it's gonna have some paint on it. This side's actually fine. The 10 millimeter socket is fitting. The driver's side, we did notice that the paint was gooped up quite a bit, so just watch out for that. You might have to break some of that paint away, but you wanna fully remove that screw.
(drill whirs) And once we get that removed, set it in a safe place because this will also get reused. Now, your kit's gonna come with some paint protection film, and that's just gonna overlay on the paint right about here where the mud flap will end up sitting, making sure that the plastic doesn't rub directly against the paint. I'll go back through with some soapy water and just clean off that surface a bit, make sure it's all dry so that we get good adhesion. Now, we don't need to be super precise about this, but I will try to get it all the way up to the edge and press firmly down on it to get a good strong seal and keep out any of those air bubbles that we might find. We're gonna start with attaching the mud flap and securing it with that quarter turn lever up top. Now, our front wheel well does have a wheel well liner, so as you're tightening this down, you do wanna make sure that you feel it kind of grab in between the fender and the wheel well liner. If you can let go after tightening it down and it stays up, then you're probably pretty good. Then all we have to do is reattach our factory hardware. I'll start with that 10 millimeter screw at the bottom and do the two seven millimeter screws last, being sure to just get them all loosely installed before finally tighten them all down. (wrench whirs) But that'll do it for a look at and installation of the WeatherTech front no-drill mud flaps on our 2023 Ford F-150. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (1379 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
These are still on my F-150 and working great.
Relatively easy to install, looks great and seems to fit well. Etrailer delivered promptly, had great follow up and I will be ordering from them again! Great employees, I loved the self help videos done by the employees..
I tried them on the pick-up, fit ok but haven't been on the road. No reason to think they won't work as they should.
didn't have the size sockets needed
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.