Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
The 8 holes in this pintle plate provide 3 different mounting positions for your pintle hitch so that you can match your trailer height. Ideal for industrial and agricultural applications. High-gloss powder coat finish resists rust.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
George: Today, well be reviewing part number BWPMHD14003. This is the B and W Pintle hood mounting plate for two-inch hitches. The hitch mount adapter place can provide a good mounting for it for a Pintle hook, which is going to be sold separately.Its going to offer three positions thats going to let you customize the height of the Pintle. You position one, position two. Your position three is going to offer four holes on each side of the mounting plate.This is made from a sturdy steel construction. Its going to feature the nice solid shank here at the back of the adapter.
Its also going to feature a high gloss black pattern coated finish. Its going to stand up really well with rusting and corrosion. Now, this portion here is going to be the portion of the sides into the receiver tube of your hitch. Youre going to push it in until you get your pin holes to line up with one another, and then youll need to install a hitch pin and clip, or a hitch pin and lock. Those are going to be sold separately. You can check out your options right here at ETrailer.com. It is designed for two hitch by two hitch trailer hitch receivers.
Its going to offer a weight capacity of 16,000 pounds. If we take a look at the mounting plate dimension, its going to give us an overall width of 5 inches and an overall height of right at 7 inches. The mounting holes measure center on center and separated by 1 of an inch, and go in this directions center on center. Theyre going to be separated by 3 3/8 of an inch. If we take a measurement from the center of the hitch pin hole to the back of the shank, thats going to give some measurement of two and a half inches. Measurement from the center of the hitch pin hole to the closest part of the upright portion right here measuring to the base of the weld, thats going to give some measurement of 5 inches, and then the distance that we have from the center of the hitch pin hole to the front of the mounting plate, thats going to give some measurement of about 8 inches. Now, the overall length measuring from end-to-end, thats going to give us some measurement of about 11 inches.
Very simple installation to get your Pintle hook on there. All you have to do is after you have one or after you purchase one, again, it just goes on the front portion here. Youre going to have three different mounting options or mounting location, those pinholes are going to line up perfectly with one another. Then all you have to do is just install your hardware. Its also a very simple installation.
Put it in our hitch. What you got to do is take the shank and slide it in to the receiver tube, line up your pin holes, and then install your hitch pin and clip, your hitch pin and lock. Get It. Its going to be sold separately. The one Im using for our demonstration today is part number PC3. Its going to be your 5/8 inch pin. Its going to come with the clip. Thats going to do if or our review of part number BWPMAHD14003. This is the B and W Pintle hook Mounting plate for two-inch hitches. .
Average Customer Rating: 4.8 out of 5 stars (334 Customer Reviews)
The 8 holes in this pintle plate provide 3 different mounting positions for your pintle hitch so that you can match your trailer height. Ideal for industrial and agricultural applications. High-gloss powder coat finish resists rust.
Part is well built and gives me the adjustability I needed for multiple applications for my hitches. The wheel had the correct offset I needed to fit my trailer correctly, and the breakaway kit was a great replacement for the one that was broken on the used trailer I just purchased. The universal trailer brake installation kit was just what I was looking for. Great quality and the ability to run either type of trailer wiring harness in one hookup. Great parts and great service!!!
Very nice product still working fine
We use this hitch plate everyday. Perfect for trailer towing. I'd like to suggest an improvement to it. You should add one or two more holes into the main tube. The hitch plate was extended out away from the truck quite far as received. We added a hole in order to move it closer to the hitch receiver. Most people don't have large machine tools in order to do this for themselves.
E-trailer contacted me the day I made my purchase to let me know one of my items was going to need to be sent direct from the manufacture and wanted to make sure I was ok with the delay on my order. Great customer service! Product arrived ahead of schedule and exactly what I ordered.
Highly Recommend!
this idem worked out well no problem's
Fast shipping, good product, thanks etr ailer
Works great
Sherman
10/10/2022
So far so good
Gregg
8/22/2022
great
Just what I was looking for. Quality of the product is great.
All products arrived in a timely fashion and were as described.
Just as advertised.
Very high quality item.
Great product
Very heavy, solid steel. Really made for if you have a jacked 4x4 truck and need to lower the hitch . Runs low on a standard suspension rear wheel drive truck. Turned it up to not drag the ground.
The shipping department don't listen I requested the hitch plate to be wrapped in bubble wrap the second time and it looks just like the first one. We are using it on our 1988 1st work truck that we had restored so we want a new hitch for the truck but there package sucks so tge paint gets marked up in shipping and looks bad. I will not be ordering again from etrailer
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
Received what I ordered. Thank you
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike S.
7/23/2018
Everything is still working great!!