Pintle mount with slotted bolt plate provides maximum adjustability for your SecureLatch pintle hook so that you can match your trailer height. The shank slides into your 2-1/2" x 2-1/2" hitch receiver. Durable gray powder coat finish.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff AT etrailer.com. Today we're gonna take a look at this Curt SecureLatch Adjustable Pintle Mounting Plate for 2-1/2" hitches. Has a 20,000 pound gross towing weight capacity. Now this pintle mount with the slotted bolt plate will provide maximum adjustability for your Curt SecureLatch Pintle Hook so that you can match your trailer height. Now that SecureLatch Pintle Hook is sold separately on our website, it's usually listed on this product page as a related product, and I wanted to pop up a insert just to show you that's what that pintle hook looks like. And basically you can get that in either a 2" diameter ball or a 2-5/16" diameter ball that, basically, that pintle hook would bolt to this plate using the included hardware right here.
All right, here, this shank portion is what'll slide into your 2-1/2" by 2-1/2" hitch receiver. And that slotted bolt plate will let you easily customize the height to your connection point. So once you bolt your pintle hook to this, you can see, that you can just slide it up or down to get the correct height you need, and then tighten it in the perfect position. Now, this can only be used in the drop position, like it's showing here. You don't wanna flip it over into the rise, It's only designed to be used in the drop position.
It is a sturdy steel construction. You can see it has a nice durable teridium gray powder coat finish to it. Now, when you do install this into your hitch receiver, it will require a hitch pinning clip or a hitch lock to secure it to the hitch receiver. That is not included, you would have to supply that, or we do sell those separately on our website, and this hitch pin hole diameter is 5/8". Application again, fits 2-1/2" by 2-1/2" trailer hitch receivers.
Weight capacity of 20,000 pounds. Just wanna give you a few dimensions on the mounting plate itself. The overall height of it, bottom to the very top is 10-5/8". The width of it is right at 5" wide. And as we mention, it does include the mounting hardware.
And once you get it to the right position, just tighten it down. But that should do it for the review on this Curt SecureLatch Adjustable Pintle Mounting Plate for 2-1/2" hitches, has a 20,000 pound gross towing weight capacity..
Average Customer Rating: 4.9 out of 5 stars (219 Customer Reviews)
Pintle mount with slotted bolt plate provides maximum adjustability for your SecureLatch pintle hook so that you can match your trailer height. The shank slides into your 2-1/2" x 2-1/2" hitch receiver. Durable gray powder coat finish.This pintle hitch help eliminate excessive noise and hookup is easy
Robust! This pintle mount plate is a monster! Fitment to my 2013 Toyota 4Runner 2” hitch is great, and precisely the size I was looking for, given rear hatch access,(The rear hatch swings free and clear) and pintle hook rise requirements. I easily went from 17” to 26” off the pavement! Photos will show the additional reflective tape I applied to necessitate a safe night’s drive. Photos show the really nice locking pin that secures the mount plate. Special kudos to Jessie at etrailer customer service to expertly assist me in the selection discussion- what a joy! Delivery was ahead of schedule and the product met my specifications! Now let’s get on the road and see how she runs!
Use this with a curt 16k combination ball/pintle hitch and am very satisfied so far. No drama purchase via Etrailer, and when the torque spec for the hitch — inexplicably — wasn’t included in the literature a call to their friendly team fixed this issue.
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
The pintle hitch mounting plate is just what I needed and better than I expected.
Thanks
As I stated with the pintle hitch everything is ruggerder than I had imagined it would be. This set up is going to help me out like no tomorrow. Thanks for your quality of products & speedy delivery!
Perfect for my needs. Thanks for supporting DIYees
Exactly what I needed to level pulling my military trailer. The pintle hitch bolted to the mounting plate within a few minutes. Now I can get into the back country with my FJ pulling a trailer made possible by the your pintle hitch/mounting plate Combination.
Thanks
Fantastic product. Not one complaint.
Perfect for what I needed to mount. Very sturdy and well made.
good quality, showed up with scratches and dinged up but etrailer did make it right.
Very well made, heavy mounting plate. No issues, Perfect distance from bumper.
mounting plate arrived in a few days. well built and very satisfied with the quality. i purchased 2 sets for both of my trucks. has a good coat of corrosion resistance, that means a lot, you don't want your hitch rusting. i live in a salt enviroment and this will hold up. the fit and finish is top notch.
I recently purchased the Curt 3-position Pintle Mount 48343 and the Demco 6-Hole Adjustable Channel Bracket - Weld On - 12" Tall - 21,000 lbs - DM66134 and found both items to be of exceptional quality. This was the first time I purchased from etrailer.com and I found their website to be the most complete in the product descriptions and the tracking information was spot on. I will use them in the future.
The 30,000Lb pintle hitch bolted on this plate with ease...This plate has just the right amount of adjustments to suit different trailer/tow vehicle heights.
Previous customer, I purchase all the towing equipment for my sons demolition company.
etrailer is always my first stop when I am tasked with finding needed equipment.....this because the site is easy to navigate and provides excellent information relative to capacity and fitment.
Whether I am in need of electrical repair parts or hard towing components, etrailer has the right stuff at fair prices.
A really great source for all my equipment needs.
Shipped out fast and exactly what I ord ered.
Excellent product at a great price. Highly recommend both the product and etrailer. The customer service people at etrailer are knowledgeable and understanding and really seem to look out for the customer. AAA+++ Unfortunately for me the mounting plate was too high (my fault) and would damage the tailgate of my truck. I wish Curt would make a plate about 2 inches shorter.
Amazing product! Absolutely fast shipping! Great buying experience. Packed tight and they don’t skimp on ensuring your product is shipped safe. 1st time buyer and I’m coming back for more! ETrailer is legit.
This 2 1/2” Curt Pintle Hook Mounting Plate is as described. Very well made. Have not used it, but I have mounted it to a Curt pintle hook.
Very pleased with my purchase.
Product was shipped very fast and everything arrived as expected. I'm happy with the product.
The best part about this transaction was the customer service. I called etrailer with a couple questions about my order. I talked to an actual person in the UNITED STATES that actually spoke good ENGLISH. It was so nice being able to connect directly with a person that was knowledgeable about the product and spoke clear English.
Keep up the good work!
Awesome hitch, would pull the frame out from under the truck before this hitch would fail….
We needed this to raise the level of a pintle hitch for our water trailer. The height is just right now. Although I haven’t towed with it yet, I’m sure it will be fine. After all, it does have 5 stars on the reviews. I do want to say that your shipping was fast. Not even a week! That I appreciate!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.