Pintle Hook Mounting Plate for Gen-Y Adjustable Ball Mounts w/ 2-1/2" Receivers - 21,000 lbs

Video Transcript for Gen-Y Hitch Pintle Hitch - Pintle Mounting Plate - 325-GH-068 Review

Speaker 1: Today we're taking a look at a Pintle Mounting Plate for a Gen Y Hitch Adjustable 2 1/2 Inch Receivers. Now, this pintle mounting plate slides into one of the receiver tubes on your 2 1/2 inch Gen Y Adjustable Hitch. This is not compatible with normal truck hitches. Once installed, you can easily add a pintle hook to the mounting plate. It does have a 2 1/2 inch by 2 1/2 inch shank here on the back side of the unit. It's made from a durable steel construction and it features a black, powder coated finish to keep the unit safe from rust and corrosion.A few measurements to go over with you real quick.

The plate itself measures six inches this direction by four inches. Then when it comes to the thickness of that plate that's 1/2 inch thick steel. The mount holes on the unit, center on center, between these is 3 3/8ths of an inch. From the center of this one to the center of this one is 1 3/4 inches. Each mount hole has a diameter of a half inch.

The pinholes here on the unit have a diameter of 5/8ths of an inch. There are multiple pinholes on the back of the unit, so that way you can have it in the end use position. Then if you want to move it to a stowed position, on the backside of the mount, of the Gen Y mount, then you can use the other set of pinholes for that as well.The product's also made in the USA and covered with a lifetime guaranteed warranty. That's gonna do it for today's look at the Pintle Mounting Plate for Gen Y Hitch Adjustable 2 1/2 Inch Receivers.