bing tracking image
  1. Pintle Hitch
  2. Tow Ready
  3. Pintle Hook - Standard
  4. Plate Mount
  5. Bumper Mount
  6. 10000 lbs GTW
Pintle Hook, Bolt-On, 10K

Pintle Hook, Bolt-On, 10K

Item # 63013
lowest price pledge
Retail:$112.77
Our Price: $65.03
You Save: 42%
Pintle Hitch
Orders above $99 qualify for Free Shipping
Shipping Weight: 10 lbs
Quantity: 
In Stock
Tow Ready No Shank Pintle Hitch - 63013
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Lowest Prices for the best pintle hitch from Tow Ready. Pintle Hook, Bolt-On, 10K part number 63013 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Tow Ready Pintle Hitch - 63013

  • Pintle Hook - Standard
  • Plate Mount
  • Bumper Mount
  • 10000 lbs GTW
  • Tow Ready
  • No Shank


Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced truck bumper.

  • 10,000 lbs GTW
  • 2,000 lbs TW
  • Mounting hardware included
  • Mounting holes:
    • 3-3/8" wide(center to center)
    • 1-3/4" up/down (center to center)
    • 17/32" hole diameter
  • Outside length, back to tip of hook: 6-3/8"
  • Hole when closed: 1-3/4"
  • Hole when fully opened:
    • Narrowest point: 2-1/4"
    • Widest point: 3-1/4"
  • Limited lifetime warranty



63013 Pintle Hook, Bolt-On, 10K




California residents: click here


Video of Pintle Hook, Bolt-On, 10K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tow Ready Pintle Hitch - Pintle Hook - Standard - 63013 Review

Today we'll be reviewing part number 63013. This is the pintle hook from Tow Ready. It's going to provide a gross towing weight of 10,000 pounds to a maximum ton weight of 2000 pounds. The pintle hook can be bolted to a pintle hitch mount or directly to a reinforced truck bumper. All the mounting hardware that you need is included. It's made from a steel construction with a powder coat finish, so it's going to stand up really well against rust and corrosion. If we take a look at the mount holes they're going to give us a diameter of 17/32 of an inch.

Measuring center on center this direction is going to measure 3 3/8 inch. Center on center up and down is going to measure 1 3/4 inch. To gain access to make a connection all you got to do is release the pin, lift up on the T handle and pull the hook back. Then you can connect here to the net 00:00:49 ring. If we take a measurement of the inside distance here it's going to give us an opening of 1 3/4 inch. The safety pin and clip is attached with a chain so we don't got to worry about losing it.

This system is also really easy to install. Today for our demonstration we're going to show you how to install it on a pintle hitch mount. All you have to do is place it up to the mount, line up the mount hole that you want to use, place the bolts through. For our demonstration I'm just going to do the top two. On the back side all you have to do is install your lock washer and secure it by tightening down the nuts.

Once you have all four bolts installed along with all the rest of the hardware you should be ready to make your connection point and get out on the road. That's going to do it for our review of part number 63013. This is the pintle hook from tow ready rated at 10,000 pounds. .


Customer Reviews

Pintle Hook, Bolt-On, 10K - 63013

Average Customer Rating:  4.8 out of 5 stars   (170 Customer Reviews)


by:

Very satisfied with the pintle hook.
However,
the ball mount (63058), as arrived, did not fit my receiver in the truck. Yes, it is 2x2 inch but the corners are not rounded like they should be. I had to use the file and to file 4 corners of the shank section which slides into my truck hitch receiver. It did not take much time to do it but it would be nice if the Etrailer contacts the manufacturer so that they can make required minor change.

I am very happy with a quick shipment of these items and great packaging of these heavy items. I would highly recommend the Etrailer to anybody who needs good parts for the trailer at a good price and for a very quick deliver.


Comments
What I bought from e-Trailer has been great. Feel free to add this as a follow up review. Thanks , have a good day
rod r - 05/05/2015


by:

I've been using this hitch with my custom built off road travel trailer, and it has been working perfectly. It's far beyond the weight of my trailer, but I notice no bumping or any annoyances when towing with it.




by:

I sell only ETRAILER pintle hooks and pintle hook combos. At my shop. And word of mouth and the function of this pintle hook and the others I stock.Is why I use Etrailer for my customers needs. Thank You! Darlene P.


Comments
thank you for the follow up. I just love this product. I have alsobought other sizes. And I am so happy with those as well.I will never purchase any other brand of pintle hook combos.
DARLENE P - 01/14/2018


by:

Just what I needed to tow my military surplus trailer behind my truck or FJ Cruiser! The safety pin is an added feature that gives one peace of mind while going off-road, especially.


Comments
Great! Still feeling good about that extra-security locking pin.
Matt L - 10/04/2017


by:

i would not think of stocking my shelves with anything but Etrailer products. I get 3 different PINTLE HOOK COMBOS and they are the best. I get nothing but compliments on this product. Some think they are pricey but after they try it,they come back every time. Thank you Etrailer.




by:

This product is great. Strong and simple. Does exactally what its supposed to do. Will buy this for all vehicles in my fleet.

Thank you etrailer for the great product! You guys also deserve a 5 star rating for you excellent customer care and service, great pricing, and fast shipping!




by:

Used this product to take my trailer camping and it worked very well.




by:

Product arrive on time.
Excellent quality
product
I would recommend other to order, and I would order again


Comments
great
Gerald - 01/25/2019


by:

Excellent service, excellent products, excellent prices, excellent packing and shipping!




by:

beefy construction. expedited shipping. thanks etrailer




by:

Excellent quality, service and price ... You won't beat "etrailer" ! ... 'hg'




by:

Heavy duty equipment. Well made




by:

Couldn't be better - great customer ser vice




by:




by:

Great website, fast shipping, glad I found you guys. I will recommend and will buy from you guys again.




by:

Nice




by:

Great




by:

Good looking product, and fast delivery. Thanks!




by:

Great product.




by:

Everything perfect Thank you




by:

Review from a similar Tow Ready Pintle Hook in Pintle Hitch


Easy lightweight and simple to use! The only issue I’ve had is the chain has come off the locking pin a couple of times, I think I’m going to get a locking pin to replace this one. I deliver motorhomes professionally and this has helped my pre and post trip times a lot, plus it’s so much easier to remove this and throw it in my vehicle when it’s raining than having to wrestle a whole hitch mounted towbar.




by:

Review from a similar Tow Ready Pintle Hook in Pintle Hitch


Products as described. quick shipping and very well packaged for heavy shipping. Definitely a go-to source for trailer parts!




by:

Review from a similar Tow Ready Pintle Hook in Pintle Hitch


My order came quickly and the pintle hook was of high quality the installation was easy




by:

Review from a similar Tow Ready Pintle Hook in Pintle Hitch


I have only used this hitch a few times, having recently purchased it. I like to see reviews after a product has seen some use. Pintle hitches are a simple mechanism, this one seems to be beefy and well made. There is a little lip at the top of the hook you can see in the listing photo if you look and already know it's there, If things are tight this is enough to catch on the loop when you are trying to unhook. If you are jacking up an already heavy trailer, this is a 30K lb hook, and can't get free of the truck it can be frustrating.


Comments
This has been a servicable well made product. Everything I would ask for . I use it on a large trailer with heavy loads, often in the 20K lb range. Most of all Etrailer contacted me for an opinion after a year use. As I said in the first review thats what counts. This is a great company I have bought multiple items from them. They know their products and stand behind them.
Shaker - 11/30/2016


by:

Review from a similar Tow Ready Pintle Hook in Pintle Hitch


Working great on my prefabricated hitch.



25
170
Show More Reviews

See what our Experts say about this Tow Ready Pintle Hitch



  • Can a Pintle Hook Mount be Used in the Rise and Drop Positions
    Yes, you can use the Pintle Hook Mount, # 63059, in either a rise or drop position. If you need a bolt on pintle hook, use # 63013. It has a 10,000 pound capacity so it has more than enough capacity for your trailer.
    view full answer...
  • Dimensions Of Tow Ready Pintle Hook # 63013
    We don't have a 3D model available, but I'd be happy to give you some measurements of the Tow Ready Pintle Hook, Bolt-On, 10K # 63013. The most notable measurements are the mounting holes. They are 3-3/8 inch center on center measuring horizontally and 1-3/4 inch center on center when measured vertically. This is a standard size to match with a mounting plate/shank like # 63057. The internal measurement is 1-3/4 inches in diameter and makes almost a complete circle. The outside dimension...
    view full answer...
    Image 1 for
  • Will The 10K Bolt On Pintle Hook # 63013 Work On 3/4 Ton Military Trailer
    On your 3/4 ton military trailer the weight capacity should not be a problem with this Pintle Hook, you would just need to measure where you are going to mount this to see if it will fit. The Pintle Hook, Bolt-On, 10K, # 63013, can be bolted to a reinforced bumper or a pintle hitch mount. The mounting holes on the pintle hook are 3-3/8 inches wide from center to center and 1-3/4 inches up/down from center to center. The mounting hole diameter is 17/32 inches. If you are going to attach...
    view full answer...
  • Pintle Plate Recommendation to Provide 5 inches of Rise
    Pintle setups are always going to have a bit of movement since the loops are so big and the hook has to have enough play to move around. In order to get the rise you need though you have to go with one of the 14 hole plates like the part # BWPMHD14004 as the smaller plates won't get you to the 5 to 6 inches of rise you need. Then for a hook the part # 63013 would work well and has a 10k capacity.
    view full answer...
  • Can the B&W Pintle Hook Mounting Plate # BWPMHD14004 be Used in Rise Position
    Yes, the B&W Pintle Hook Mounting Plate # BWPMHD14004 can be used in the rise position if needed. If used in the rise position, the # 63058 pintle hook mount would measure 11-1/2 inches from the bottom of the shank to the top of the plate. If you need a pintle hook you could use the part # 63013. This has a 10k capacity. Check out the review video.
    view full answer...
    Image 1 for
  • What Capacity Pintle Hook is Needed for a 4,000 Pound Trailer
    If the gross trailer weight is 4,000 pounds (2 tons) you would need a pintle rated greater than 4,000 pounds. The gross weight would be the total weight of the trailer plus anything loaded on it. Pintle hook # 63013 is rated for 10,000 pounds so it would work just fine. You would also need a mount to attach the pintle hook to so use it in a 2 inch trailer hitch receiver. You can use # 63057. And for hardware you can use # 43076.
    view full answer...
  • Availability of 5 Ton Pintle Hook Ball Mount
    We do have a bolt on Pintle Hook with a 10K capacity. Check out part # 63013. You may also need a mount to attach the pintle hook to so use it in a 2 inch trailer hitch receiver. You can use # 63057. And for hardware you can use # 43076. I have included a video review of this part for you to check out. The prices are available on the product page.
    view full answer...
  • Would a Tow Ready Pintle Hook work with Military Trailer with Lunette Ring Coupler
    If the military trailer you are looking at has a lunette ring coupler for attaching to a pintle the part # 63013 would do a great job as long as the total weight of the trailer loaded was less than 10k. Let's say you need more capacity than that though, the part # 63015 has a 30k capacity. For a mount that would fit in a trailer hitch you would want the part # 63057.
    view full answer...
  • Available 2-Inch Pintle Style Mounts
    The pintle mount that fits on the shank of the Pro Series Adjustable Pintle Mount # 63072 is not available as a separate item, only as part of the complete kit with the shank. I confirmed this with Pro Series. This item can be used with Pintle Hook # 63013 and 2-5/16-inch Pintle Hook Combo # C48200. I linked for you our main page for 2-inch pintle style mounts and related parts.
    view full answer...
  • Can the B&W Pintle Hook Mounting Plate be Used in Both the Rise and Drop Positions
    The B&W pintle hook mounting plate # BWPMHD14004 can be used in the rise or drop position and the capacity remains the same. It is rated for 16,000 pounds gross trailer weight. For a bolt-on pintle hook you can use # 63013 which is rated for 10,000 pounds so you would be limited to that 10,000 pounds. Use hardware # 43076 to bolt it to the mounting plate. For a higher capacity pintle hook use # 63014. It is rated for 20,000 pounds but you would be limited to the 16,000 pound capacity of...
    view full answer...
  • Can B&W Pintle Hook Mounting Plate be Used in Rise Position
    Yes the B&W Pintle Hook Mounting Plate # BWPMHD14005 can absolutely be used in the rise position to raise the height of your Pintle Hook such as the part # 63013 which would work well with this plate. This mounting plate fits 2" hitches, has a 15" shank and mounting holes that measure 3-3/8" apart on center horizontally and 1-3/4" apart on center vertically, which is the same pattern as the bolt holes on Pintle Hook # 63013. You will also need Pin and Clip # PC3 to secure it to your hitch. I...
    view full answer...
  • Small Hitch Ring Lunette Ring for Snowmobile Pintle Hitch
    The Buyers Products 2-1/2" I.D. Weld-On Forged Steel Lunette Ring # 337LW10 is the smallest lunette ring we carry. It is 1 inch thick. I've attached a video to assist with other dimensions. It sounds like you may need to make some slight modifications to make something compatible or you may want to replace your pintle hitch on your snowmobile with # C48005 or # 63013.
    view full answer...
  • Pintle Hitch with 6 Inch Rise to Clear Spare Tire on a Jeep Liberty
    Given the low weight of the trailer you might be able to use an extension such as # HE06 since none of the pintle mounts will come out far enough to clear the spare tire on your Jeep Liberty. However, the use of an extender will reduce the tongue weight capacity of the hitch by 50 percent. As long as the tongue weight does not exceed the reduced tongue weight it will work. You could use a pintle hook mount, # 63058, with pintle hitch # 63013. If that will not work then the easiest solution...
    view full answer...
  • Will B&W Pintle Mounting Plate Clear Lowered Tailgate on a 2017 Chevy Silverado
    B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs Item # BWPMHD14004 measures 10-1/8 inches from the center of the hitch pin hole to the mounting plate for a pintle hitch. If you were to then add something like Pintle Hook, Bolt-On, 10K Item # 63013 it sticks out another 6-3/8 inches total so you would be looking at a total extension of about 15 inches so it probably won't stick out far enough to clear a lowered tailgate on your truck. B&W Pintle Hook Mounting...
    view full answer...
  • Options for a Pintle Hook to Connect to a Trailer with 8 Inches of Rise
    As you obviously have already learned there are a lot of variables into building a trailer. And I can't tell you what is or isn't completely safe in your exact circumstances. I highly recommend having your setup evaluated by a professional welder who has experience with trailers. Some of the components you're trying to combine may be just fine but only someone with experience and ability to test such products can really tell you that. I can't recommend using # RP45294 with # 63023....
    view full answer...
    Image 1 for Image 2 for

Do you have a question about this Pintle Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality pintle hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate pintle hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010