bing tracking image
  1. Pintle Hitch
  2. Tow Ready
  3. Pintle Hook - Standard
  4. Plate Mount
  5. Bumper Mount
  6. 20000 lbs GTW
Pintle Hook, Bolt-On, 20K

Pintle Hook, Bolt-On, 20K

Item # 63014
lowest price pledge
Our Price: $83.09
You Save: 27%
Pintle Hitch
Orders above $99 qualify for Free Shipping
Shipping Weight: 12 lbs
Pintle Hitch 63014 - No Shank - Tow Ready
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Need help with installation?
Locate installers near me
20K Pintle Hitch. Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper. Lowest Prices for the best pintle hitch from Tow Ready. Pintle Hook, Bolt-On, 20K part number 63014 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Tow Ready Pintle Hitch - 63014

  • Pintle Hook - Standard
  • Plate Mount
  • Bumper Mount
  • 20000 lbs GTW
  • Tow Ready
  • No Shank

20K Pintle Hitch. Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper.


  • 20,000 lbs GTW
  • 4,000 lbs TW
  • Mounting hardware included
  • Mounting holes
    • 3-3/8" wide(center to center)
    • 1-3/4" up/down (center to center)
    • 17/32" hole diameter


63014 Pintle Hook, Bolt-On, 20K

California residents: click here

Video of Pintle Hook, Bolt-On, 20K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Tow Ready Pintle Hitch - Pintle Hook - Standard - 63014 Review

Today we're going to take a look at the TowReady pintle hook, number 63014. This pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper. It has a gross towing weight capacity of 20,000 lbs., and a tongue weight capacity of 4,000 lbs. As you can see, the mounting hardware is included. It has four mounting holes, as you can see here. And we'll do a quick measure.

From center-to-center side-to-side is 3-3/8", and center-to-center top-to-bottom is 1-3/4". The holes themselves are 17/32" in diameter. The way this works is, to open this up to attach to a lunette ring, you will unhook the clip and pop that out. As you can see, the pin and clip are attached to the product with a lightweight chain. You will lift the lever here, and that opens that up.

And then you will back up into the trailer and the lunette ring will fit right on there. You will then close that end for additional security. You will put the pin and clip back in there, and it fits in like that. Pop that in and then the lever is going to stay shut. It will not open up while you're travelling.

To show you how this would work with the pintle mount, we have our 2" receiver demonstrator here. As you can see, we have our DrawTite pintle hook mount. That is number 63057. It is sold separately. It fits a 2" receiver, like this one.

And then you would use the mounting hardware to bolt that in however you need. This is in the drop position. However you need your drop or rise is the way you would put your pintle mount in there, and again you would just bolt that however you needed. That should just about do it for our TowReady pintle hook, number 63014.

Customer Reviews

Pintle Hook, Bolt-On, 20K - 63014

Average Customer Rating:  4.8 out of 5 stars   (170 Customer Reviews)

20K Pintle Hitch. Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper.


Products as described. quick shipping and very well packaged for heavy shipping. Definitely a go-to source for trailer parts!


My previous pintle hitch broke on a trip down to Baja, MX. The hitch purchased from etrailer is much stronger and weathered the same trip with no problems.


I've had no problems so far. Hooks and unhooks easily, a good strong product. I've used it for a year with a Big Tex tandem trailer, usually pulling 15000 lbs total.


Thanks for another good product. We needed a reliable pentle hitch for the job and a decided to buy one with a higher weight rating that we needed for safety reasons. Turned out to be just what we were looking for, safe and strong! The video was a big help in deciding this was the right product. Thanks.


Pintle hook was exactly as shown. Latching mechanism is tight with minimal free play, and the safety pin is heavier grade that other pintle hooks I"ve used.


Fast shipping. Nice product. Bolted to my b&w Pintle mount plate and hooked up to a 15k trailer. No issues


Product seemed well built, but the black paint was barely on it, looks like the pintle was sprayed after it was together so that none of the areas that are covered when it is closed were painted at all. I'm a little dissapointed with this facet. but otherwise it seemed to be in good condition.


Worked great with the drop hitch.
as described
Really fast shipping.
Had them on my door step in less than three days.
Thanks so much


Heavy duty with matchibg hardware. Once mounted, I used this pintle hook to pull a trailer and cargo weighing 12,000 pounds.


The customer service I received was wonderful. We have not used the product yet, but it was received exactly when it was supposed to show up with all the correct parts in the box. I plan on using etrailer for other purchases as well.


Just installed it this morning. If you order this for the Toyota LandCruiser FJ-80, plan on buying two bolts that don't come with the kit. They just screw in the pre threaded holes. No biggy. About six bucks. Otherwise, good so far. Installation is easy. I recommend for now.


Used this to haul my JLG lift and equipment trailer with a total weight of 18000 #....worked great, no problems....thanks


I' like this Pintle Hitch works great for me.
Great Product !!!
Thank You .


Had the product I needed. Fast delivery.. Had made purchases in the past and will keep buying from..... thanks etrailer... great job !!!!




Second Hitch ordered. Much faster shipping time than the first.


Great value, the shipping was fast, 0 complaints. I recommend etrailer for all your towing needs.


Mounted up perfectly to my new receiver. Everything included for install and also very easy to install.


Ordered my part and it was at my doorstep in no time!


Good quality
Easy installation


Very happy with hitch and shipping.


Wow! Delivery on time, actually before i expected . Very smooth in all regards. thanks etrailer.


Worked great with the drop hitch.
as described


Extra heavy duty, great buy


Fast shipping. Hitch works great.

Show More Reviews

See what our Experts say about this Tow Ready Pintle Hitch

  • Will Pintle Hitch # 63014 Work with my Tow Bar with Eye Diameter of 76mm
    The Bolt-On Pintle Hitch, # 63014, is made to be used with a 3 inch Lunette Ring like the # 63036. I pulled the product from the warehouse and the hook measures approximately 1-1/2 inches or 39 mm in diameter and the jaw depth is approximately 1-7/8 inches or 46mm. I have attached pictures to show where the measurements were taken. With the measurements that you have provided, it looks as though this hitch will work for you.
    view full answer...
    Image 1 for Image 2 for
  • Recommendation For Pintle Hitch To Work With 3-Inch Lunette Ring On 10-Ton Trailer
    Yes, the Tow Ready Bolt-On Pintle Hook, Item # 63014, will work with a 3-inch lunette ring on a 10-ton trailer. It has a maximum weight capacity of 20,000-lbs and a maximum tongue weight capacity of 4,000-lbs. The mounting hardware is included and it can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper. If you need a similar pintle hook with greater capacity, I recommend the Tow Ready Bolt-On Pintle Hook, Item # 63015, that has a maximum weight capacity...
    view full answer...
  • Would the Bolt-On Pintle Hitch # 63014 Fit a Military Trailer with Lunette Ring
    The Bolt-On Pintle Hitch, # 63014, is made to be used with a 3 inch Lunette Ring like the # 63036. I pulled the product from the warehouse and the hook measures approximately 1-1/2 inches or 39 mm in diameter and the jaw depth is approximately 1-7/8 inches or 46mm. I have attached pictures to show where the measurements were taken. Nearly all pintle hitches are designed to fit the same dimensions, but you can compare what I provided with your current trailer to see if they would be compatible...
    view full answer...
    Image 1 for Image 2 for
  • Pintle Hook Mount and Pintle Hook Recommendation for Pulling a Military Trailer With a Chevy Tahoe
    The pintle hook mount that I would recommend for you is the Pintle Hook Mount, 12-1/2 inch Tall, 8K, part # 63058. This hook mount has an adjustable rise that will go up to a 12 inches. That would put the height of your pintle hook mount right at 31 inches if it was in the highest possible position. This hook mount has a tongue weight capacity of 800 lbs and a total weight capacity of 8000 lbs, you will want to check that against the weight of your trailer to make sure its not too much...
    view full answer...
  • Will 20K Pintle Hook 63014 Bolt to B&W Pintle Hook Mounting Plate PMHD14005
    Yes, you can bolt pintle hook # 63014 to B&W Pintle Hook Mounting Plate # BWPMHD14005. However, the capacity of the mounting plate is 16,000 pounds so that is the maximum capacity of this set up even though the pintle hook is rated higher. You always have to go by the lowest rated component.
    view full answer...
  • Can the B&W Pintle Hook Mounting Plate # BWPMHD14005 be Used in Rise and Drop Configuration
    There's no reason you couldn't use the B&W Pintle Hook Mounting Plate # BWPMHD14005 in both the rise and drop configuration. For a pintle hook to go along with it you might also be interested in the Pintle Hook part # 63014.
    view full answer...
  • Mounting Hole Spacing on B&W Pintle Hook Mounting Plate BWPMHD14005
    I went to our warehouse and measured the B&W Pintle Hook Mounting Plate # BWPMHD14005. I measured the center to center horizontal hole spacing at 3-3/8-inches so it will work well with Pintle Hook # 63014.
    view full answer...
  • Can A Lunette Ring Be Used with the B&W Pintle Hook Mounting Plate
    The B&W Pintle Hook Mounting Plate part # BWPMHD14005 that you referenced will slide into a 2" receiver tube opening on the tow vehicle. This will then accept a pintle hook so that you can tow a trailer with a lunette ring, not the other way around. Unfortunately, we do not have a lunette ring for this mounting plate as again it is designed to be used with a pintle hook, not a lunette ring. If for some odd reason your trailer has a pintle hook and not a lunette ring then we would not have...
    view full answer...
  • Does Reese Titan Pintle Hook Mounting Plate part # RP45294 Fit Curt Hitch
    Yes, the Reese Titan Pintle Hook Mounting Plate part # RP45294 would fit and work well in a Curt 2-1/2 inch hitch. For a pintle hook we have the part # 63014 that would bolt right up as well.
    view full answer...
  • Does B and W Pintle Plate # BWPMHD14004 Fit Pintle Hook # 63014
    I looked up your order notes and it looks like you ordered the Pintle Hook # 63014 and the B and W Plate part # BWPMHD14004. These two parts are compatible with each and will work well for you. The mount has the lower capacity of 16k so that will be your overall capacity since you are limited by your lowest rated component as the overall capacity. If your hitch or vehicle has a lower capacity than that (most likely yes) then you'd have to go by whatever the lowest number is.
    view full answer...
  • Can B&W Pintle Mount and Tow Ready Pintle Hook Give 4 inches of Drop
    Yes, if you used the Pintle Mount part # BWPMHD14005 that you referenced with the 20k Pintle Hook part # 63014 you'd easily be able to get the 4 inches of drop you need. Both of these components have well over the 13,500 lb capacity you are in need of so they will work well in that regard as well.
    view full answer...
  • Need Adapter to Mate Military Trailer With Standard 2-Inch Hitch Ball
    Often military trailers use a pintle or clevis type hitch. The link provided at right will take you to our main page for ball mounts where you can see both types. You can submit a photo to us to show your military trailer's hitch by responding to this email or by uploading your photos with a question. Please be sure to provide complete information on both the trailer and vehicle. For example, we offer mating pintle type parts # 63036 and # 63014.
    view full answer...
  • Recommended 3 Inch Lunette Ring Over 2-1/2 Inch Alternative
    The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs # DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3 inch rings are designed for that style application. All of our pintle hooks like # 63014 are designed to work with the 3 inch lunette ring. There will be come movement, but there is not excessive slop. There needs to be some movement with this...
    view full answer...
  • Determining Towing Capacity when Using B and W Pintle Mounting Plate # BWPMHD14005
    With towing capacities you are always limited by the lowest rated component in your towing setup. Since the B&W Pintle Hook Mounting Plate # BWPMHD14005 has a 16,000 lb towing capacity and is lower than your flat bed capacity it would be the capacity you'd need to abide by between the two. You should also check the towing capacity of your truck and make sure not to exceed that figure either. We have the bolt on Pintle Hook part # 63014 too which has more capacity than you'd ever need...
    view full answer...
  • Recommended Adjustable 2" Ball Coupler To Replace A Lunette Ring On A Trailer
    If you are replacing your current lunette ring, you will need to check on 2 measurements to make sure a coupler will fit your channel. First will be the width and second will be the hole spacing. As an example, the Demco Trailer Coupler - Adjustable Channel Mount # DM12688-95 will fit a 3" wide channel and will have 2" hole spacing when measured center to center. This is also designed for the use with a 2" ball and will have a 10,000 max capacity. Odds are this will match what you have...
    view full answer...
    Image 1 for
  • What is a Pintle Hitch
    A pintle hitch is primarily used in heavy duty towing situations. The hitch itself resembles a hook that can be closed around the lunette ring that is mounted on the trailer. Part # 63014 is a good example of a pintle hook. If you look at part # 63022, you can see what the lunette ring looks like. Combination pintles are available, like part # TR63042. This item can accommodate either a standard coupler or a lunette ring. The pintle/lunette combination is typically used on construction...
    view full answer...
  • Recommended Pintle Hook And Mount With 8 - 10 Inch Rise
    If you have a 2 inch receiver opening on the vehicle you will be towing with the B&W Pintle Hook Mounting Plate, part # BWPMHD14005 may work well for you. The mounting plate features 7 holes on each side of the plate that are spaced 1-3/4 inches center to center and the space between the two rows of mounting holes are spaced 3-3/8 inches center to center. The weight capacity for this mount is 16,000 lbs. The distance from the center of the hitch pin hole to the mounting plate is 12-1/8...
    view full answer...
    Image 1 for
  • Can the B&W Pintle Hook Mounting Plate be Used in Both the Rise and Drop Positions
    The B&W pintle hook mounting plate # BWPMHD14004 can be used in the rise or drop position and the capacity remains the same. It is rated for 16,000 pounds gross trailer weight. For a bolt-on pintle hook you can use # 63013 which is rated for 10,000 pounds so you would be limited to that 10,000 pounds. Use hardware # 43076 to bolt it to the mounting plate. For a higher capacity pintle hook use # 63014. It is rated for 20,000 pounds but you would be limited to the 16,000 pound capacity of...
    view full answer...
  • Will a Pintle Hitch Fit Weld-On Nose Plate 337TNP716625750
    Plate # 337TNP716625750 is going to be larger than what pintle hook # 63014 requires. The pintle hook is usually on the vehicle side so the mounts for it all have regular shanks that fit a hitch receiver. You want something like part # 63057. The nose plate would be used on the trailer side to attach a lunette ring such as # 63023. The bolt holes are 4-1/2 inches apart.
    view full answer...
  • What is Needed for a Pintle Hook for a Ford F-250 Super Duty to Tow a Trailer Level
    You will want a pintle hitch or any ball mount on a vehicle at the appropriate height to tow the trailer level. To do this you will need to park the vehicle and trailer on level ground and take some measurements. I have included a link to an FAQ article that will help. On a pintle hitch you would need to measure from the ground to opening on the hook part and on the ring measure from the ground to the bottom of the ring. Once you know the rise or drop you need what you can do is get an...
    view full answer...
  • Higher Rated 2 Inch Pintle Hook Mounting Plate
    Both parts # BWPMHD14005 and # BWPMHD14004 have a tongue weight capacity of 1,600 pounds. Part # 63014 has a tongue weight capacity of 4,000 pounds. So using that hook with either of those two mounts limits you to the lower 1,600 pound capacity. For a higher rated mount the Buyers Products, part # 337PM1012, has a tongue weight rating of 2,000 pounds.
    view full answer...
  • Can B&W Pintle Hook Mounting Plate be Used in Rise Position
    Yes, you can mount the B&W Pintle Hook Mounting Plate for 2" Hitches # BWPMHD14005 in the rise position if you like. If you are looking to tow with it you can use Pintle Hook # 63014 or Pintle Hook with 2-5/16" Hitch Ball # 33710055. To mount the plate you will need either Pin and Clip # PC3 or to lock it to your hitch and secure it, the Trailer Hitch Receiver Lock # 1480DAT.
    view full answer...
  • What Will I Need To Flat Tow a Toyota RAV4 Behind a 2008 Volvo Semi Truck
    Assuming that your 2008 Volvo semi truck has a reinforced utility bumper, I recommend installing the Bolt-On Pintle Hook, # 63014. This hook has a gross tow rating of 20,000 pounds and can be directly bolted to the bumper. In order to tow your 2008 Toyota RAV4 you will need a few different items starting with the Blue Ox Allure Pintle Style Tow Bar, # BX7460P. This heavy-duty tow bar allows you to safely and securely tow a vehicle up to 10,000 pounds. The Blue Ox Base Plate Kit, # BX3770,...
    view full answer...
    Image 1 for

Do you have a question about this Pintle Hitch?

  • Why

    At we guarantee:
  • Highest quality pintle hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate pintle hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.