Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Low-pressure 2-stage LP gas regulator ensures a continuous flow of gas to all appliances by combining a high-pressure first-stage and low-pressure second-stage regulator into one unit. Designed for RV applications.
Features
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the JR Products, low pressure, two-stage RV LP gas regulator. Now, this is a low pressure, two-stage LP gas regulator that will ensure a nice, smooth, continuous flow of gas to all your appliances by combining a high pressure first stage and a low pressure second stage regulator, all into one.On this end, it has the quarter-inch female FPT inlet connection, to connect to your guests cylinder. On the other end right here, it's a three-eighths inch female FPT outlet connection. And when you do install this, it isn't above outlet vent position. Here's your vent right here. So, you do want to make sure this regulator is mounted with the vent pointing down so that any water or debris inside will not collect in the regulator.
Does offer right here. You can unscrew this and it gives you a gauge port, if you want to attach a pressure gauge to it.It is all a nice zinc die-cast construction, uses molded rubber diaphragms. It is UL approved. Right up here, it has this black cap that you can unscrew, and that'll give you access to adjust the pressure in your regulator, and then put the cap back on. It all has a nice powder coat finish to it and the BTU capacity on this is 225,000 BTUs per hour.
It does come with a nice set of instructions on how to install it and how it operates.And then we also offer a regulator cover to help protect this regulator. It is sold separately on our website. It's part number 37207-30295, and I happen to pull that and it's a white plastic. Basically, what it would do is just clip on, just like that. And it protects the regulator from anybody getting to the adjustment knob there and protects the finish on it.
But again, that's sold separately and it's usually listed on this product page as a related product. Let's go ahead and pop that off. There you go. But that should do it for the review on the JR Products, low pressure, two-stage RV LP gas regulator.
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
Low-pressure 2-stage LP gas regulator ensures a continuous flow of gas to all appliances by combining a high-pressure first-stage and low-pressure second-stage regulator into one unit. Designed for RV applications.Purchased day delivery but because UPS didn’t get the product the same day as the label it took 4 days. Product performs as expected but don’t charge for 2 day delivery if you can’t make it happen!! etrailer needs to refund my shipping cost for failure to provide delivery service purchased!!
Replaced 4 year old leaking regulator. Ease of replacement. Time will tell how long replacement will last.
William C.
5/11/2021
After a year this product is still working well.
Same size as the original. Seems to be good quality and not cheap metal.
My one complaint is the shipping packaging. I get that it’s a chunk of metal that shouldn’t be damaged but it’s shipped in the plastic package it sits on the shelf in, and just placed in a much bigger box. It just rattles around inside its plastic box, which rattles around the shipping box.
Powers all my gas appliances. Water heater, stove, refrigerator.
I installed the regulator but unfortunately it didn't solve my problem. I have submitted a question to your experts about the pigtail that connects the tank to the regulator. It is the only other com ponent in the system upstream of the regulator. My problem is tank valve open but no flow.
Your service is excellent
Needed a propane regulator on Sunday for our RV by Wednesday as we were going on a trip, product arrived on time and was installed by Wednesday night. Started our trip on Thursday:). Very efficient and prompt.
Thank you for your great service !!
Definitely needed for the soft hose/propane refurb on our NTU PUP. Works like a two stage should.
Factory replacement for my Fleetwood camper. Made by Fairview
Replacement for coleman popup
Did get the exact part I ordered
original like the one on my trailer
Worked great!
Works well!
Perfect fit and quick delivery!
very easy to do business with. speedy delivery part was the same as original equipment.
Do you have a question about this Propane Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
2/15/2022
I will have our customer service team reach out to you.