bing tracking image
  1. Propane Fittings
  2. MB Sturgis
  3. Hoses
  4. Pigtail Hoses
  5. 2 Feet Long
  6. 1/4 Inch - MIF
MB Sturgis Propane PigtailHose - POL x 1/4" Male Inverted Flare - 2'
MB Sturgis

MB Sturgis Propane PigtailHose - POL x 1/4" Male Inverted Flare - 2'

Part Number: 100019-24
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$20.61
Retail:$36.00
You Save: 43%
Propane Fittings
Add to cart
MB Sturgis Hoses - 100019-24
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Pigtail hose connects your RV's propane tank to a 2-stage regulator. Can also be used to hookup an auxiliary tank to a T-fitting inlet such as the Sturgi-Stay so you don't need to break camp to resupply. Great Prices for the best propane fittings from MB Sturgis. MB Sturgis Propane PigtailHose - POL x 1/4" Male Inverted Flare - 2' part number 100019-24 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (71)
  • Q & A (0)
  • Photos

MB Sturgis Propane Fittings - 100019-24

  • Hoses
  • Pigtail Hoses
  • 2 Feet Long
  • 1/4 Inch - MIF
  • POL - Male
  • MB Sturgis

Pigtail hose connects your RV's propane tank to a 2-stage regulator. Can also be used to hookup an auxiliary tank to a T-fitting inlet such as the Sturgi-Stay so you don't need to break camp to resupply.


Features:

  • Pigtail hose lets you connect a propane tank to your RV's 2-stage regulator
    • Replaces a worn out or damaged supply hose
    • Usable as a fill hose to connect to a T-fitting to a backup tank
    • Pairs well with a Sturgi-Stay (103602-MBS - sold separately)
  • Male POL fitting connects to your ASME tank or propane cylinder
  • Male inverted flare hooks into 2-stage regulator or adapter
  • Durable thermoplastic hose and brass fittings approved for LP gas only
    • Rated for high pressure and high flow rate to handle unregulated propane
    • UL569 and ANSI Z21-81 certified
  • Made in the USA


Specs:

  • Temperature range: -40 F to 140 F
  • Hose dimensions: 24" long x 1/4" inner diameter
  • Hose fittings:
    • POL tank connection
    • 1/4" Male inverted flare
  • Maximum pressure rating: 350 psi
  • Maximum flow capacity: 500,000 Btu per hour
  • 1-Year limited warranty


While this fill hose is typically used in conjunction with a Sturgi-Stay T-fitting (sold separately), it can also be used to connect your dual-cylinder propane setup to the regulator on your RV. It is important to note that this hose does not have a back-check to contain a gas leak. Therefore, when used as part of a dual-cylinder setup, it is not RVIA compliant. A backflow check valve is needed to prevent a major gas leak if one inlet is not connected or has a faulty connection. Both tanks in a dual tank system require check valves. An adapter fitting that includes a back-check (204120-MBS - sold separately) can be used to make your changeover regulator RVIA compliant.



100019-24-MBS MB Sturgis Sturgi-Stay Propane Supply Hose - POL Pigtail x 1/4" Male Inverted Flare - 24"





Customer Satisfaction Score:


Customer Reviews

MB Sturgis Propane PigtailHose - POL x 1/4" Male Inverted Flare - 2' - 100019-24

Average Customer Rating:  4.8 out of 5 stars   (71 Customer Reviews)

Pigtail hose connects your RV's propane tank to a 2-stage regulator. Can also be used to hookup an auxiliary tank to a T-fitting inlet such as the Sturgi-Stay so you don't need to break camp to resupply.

by:

These 24" pigtails fit my twin 30lb. horizontal Manchester propane tanks and automatic transfer valve like the original pigtails in my 1997 Lance truck camper. No more propane leaks! Easy to install.



by:

The propane lines for my Lance Camper fit perfectly, but it was the actions by William at etrailer that got the job completed. The parts were unavailable around town. etrailer followed up on the parts until the manufacturer produced the parts needed. Thank you.



by:

I thought this product would be the solution to making a propane connection. The parts on the old food truck are non standard. I was unfamiliar with the inverted flare which turned out to be the wrong fitting. I have since found an adapter so that I can use these connectors and not have to return them. etrailer was not at fault and the service was fast and reasonably priced..



by:

Exactly what I needed



by:

This is a great USA made product with Accuflex Canada hose. The USA professional grade brass ends and crimps are great. MB Sturgis is a great product. Customer service at etrailer.com is EXCELLENT!!!!!!! Would highly recommend this to anyone in need of this hose.



by:

I have ordered 2 items from etrailer. In both cases the items were as described, and delivered promptly. Even more important, the sales person that I spoke with was very nice, and very knowledgeable. Excellent all around service.



by:

Kimberly O really went above and beyond on helping return one item, snd over nite the corrected item . Very helpful, friendly, and professional. Thanks a bunch …



by:

the propane fittings were just what I needed, and the best part was that the salesperson was able to walk me through identifying the correct pieces. Price and delivery were great, as well. 5 stars!



by:

I looked all over for parts 22 year setup hoses needed replaced I had almost give up then I found them at Etrailer. Exact fit ,good quality grate service will buy again in



by:

Using to connect automatic LP changeover regulator to generator. Product is well made and price is good.



by:

This is the perfect part to complete by duel propane heating system on my workshop. The product was well described and the shipment was prepared and shipped super fast.



by:

Nice website, clear description of item, prompt delivery and good price. Can't do any better than that. Shure to recommend this seller for trailer parts and supplies. Replaced leaky pigtails on our trailer propane tanks. Recommend using silicon lubricant on the O-rings to prevent damage to them.



by:

I had hard lines connecting my 100 lb. propane tanks to my changeover valve before I switched to the flexible rubber version. It seems to be so much easier to change tanks at my cottage now! Great Product!
Thank You



by:

It was the wrong size diameter hose. Can I return it for the correct size?

Jenny N. profile picture
Etrailer Expert

Jenny N.

6/9/2022

I will have our customer service team reach out to you. As long as the part is new and it is within 60 days it can be returned.



by:

Everything about my etrailer purchase was perfect. The right part, excellent package tracking, timely delivery and a great price. I will come back here is more parts are needed for my Camper.



by:

This regulator and fill hose are replacements for my 1989 Coleman Chesapeake pop up camper. Very nice products. The customer service and rapid shipping on this order was excellent. I look forward to my next purchase from etrailer!.



by:

Hoses were good quality and the exact fit for the hoses being replaced on my 1998 RV.
Good value.



by:

great product, fast service.



by:

Can't get anything this good in Canada.
I
had to go online for, ma
de in the USA, Quality hoses.
Need I say anything more?



by:

It was the wrong hose. Not cost efficient to return. Mine required a 3/8" NPT, not 1/4" male inverted flare. Had to go to a propane company to have one manufactured.



by:

The perfect pigtail for setting up my generator with two propane tanks and an auto-changeover generator.



by:

Very Fast Service, easy to find what we needed.



by:

fit well, quick shipping



by:

Excellent product, also your customer service crew is outstanding , knowledgeable, patient, polite and very quick to satisfy all your questions and needs.



by:

The best part was the advice I got from the customer service person on the phone. He was knowledgeable and very helpful. The entire remainder of my transaction went perfectly.


25
71
Show More Reviews

See what our Experts say about this MB Sturgis Propane Fittings

  • Parts Needed For Connecting Two 100LB Propane Tanks To a Furnace
    You will most likely need the JR Products Automatic Changeover 2-Stage Propane Regulator # 37207-30395 for going to your furnace. Be sure to verify with the furnace manufacturer that a 11" WC regulator that delivers 345,000 BTU P/HR is compatible with that furnace. With this auto changeover regulator it will draw propane from one tank until empty and then switch over to the 2nd tank automatically so you won't have to change anything to the 2nd tank. To connect your 100lb propane tanks...
    view full answer...
  • Recommended Regulator for a 100 lbs Propane Tank
    For a 100 lbs propane tank you'll want to use the Camco Horizontal 2-Stage Propane Regulator item # CAM59333. It has the P.O.L. fitting which is used on 100 lbs propane tanks like yours. At the end of it is a 3/8" NPT connector which you'll want to match up with whatever fitting is inside your food truck. I have no way of knowing what size fitting you're connecting to or how far away it is so I can not recommend a hose.
    view full answer...
  • Availability of Pigtail Hose Without Back-Check
    We do have the MB Sturgis Sturgi-Stay Propane Fill Hose # 100019-24 which doesn't have a back-check. This pigtail has a POL fitting on one end and then a 1/4" male inverted flare on the end that connects to your regulator so if you already have an adapter in the regulator you'll need to remove it to use this pigtail. Please note that when used as part of a dual-cylinder setup, this will not be RVIA compliant. The adapter fitting # 204120-MBS would need to be purchased (which has the back-check)...
    view full answer...
  • Tee and Hose for Quick-Disconnecting Grill with 1 lb Propane Fitting
    Although it isn't paired together in a kit, you can use the T-Fitting # 103537-MBS with the Quick-Disconnect Propane Hose # 100476-72-MBS for your application. This provides you with the quick-disconnect equivalent of the MB Sturgis Sturgi-Flow T-Fitting w/ Hose for POL Valve # 103608 that you referenced.
    view full answer...
    Image 1 for
  • Replacement Propane Hose From POL to Regulator Thats 28 Inches Long
    The overall length of the MB Sturgis hose you asked about is 24-7/8 inches so it's too short for you. Instead I recommend using part # 37207-30645 which is 30 inches. It's a little longer than what you need but it has the same fittings.
    view full answer...
    Image 1 for
  • Parts Needed to Convert RV to Dual Tank Regulator with Automatic Changeover
    You'll want a automatic changeover dual tank regulator like the part # CAM59005 for your two tanks to feed into. This gives you the fuel of basically both tanks without any interuption switching between them. From your tanks to the regulator you'd want pig tails like the part # 10019-24 and then your main feed line would attach to the regulator and you'd be set.
    view full answer...
  • Recommended 18 Inch POL to 1/4 Inch NPT Propane Hose
    I do have an option for you but the only hose we offer with these fittings (POL x 1/4" Male NPT) is the MB Sturgis Propane Supply Hose part # 100202 which is 10'. That said, if this is going from the tank to the regulator then you should be able to use the MB Sturgis Propane PigtailHose part # 100019-24 with the Propane Adapter Fitting part # 37207-30035 which is 2'.
    view full answer...
  • How To Attach a 100 Lb and 40 Lb Propane Tank to the MB Sturgis Vertical 2-Stage Propane Regulator
    In order to connect the MB Sturgis Vertical 2-Stage Propane Regulator part # 108220 to a 100 lb propane tank you will need the MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-24 and the MB Sturgis Propane Adapter Fitting part # 402258-MBS. In order to connect this same regulator to a 40 lb propane tank you will just need to use the MB Sturgis Propane Hose w/ Back Check part # 100473-24-MBS.
    view full answer...
  • Propane Supply to 1/4 Inch Inverted Male Pigtail Hose
    I have exactly what you are looking for! We have the MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare - 3' # 100019-36. If you want an even shorter length, we also have the 24 inch # 100019-24.
    view full answer...
  • Dual Propane LP Tank Setup 100 Lb for RV or Travel Trailer
    Yes, the # 100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the # 204120-MBS fitting that includes a back-check. Without the back-check, your setup would not be RVIA (Recreation Vehicle Industry Association) compliant. You mentioned that you'd like to connect to a T first, before connecting to the regulator. I called my contact at MB Sturgis to...
    view full answer...
    Image 1 for
  • Parts Needed To Connect Two 100lb Propane Tanks To a Food Truck
    Typically when connection two 100lb propane tanks you will want to use a MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS and connect the tanks to it using 2 of the Pigtail hoses # 100019-24. The regulator has a maximum output of 500,000 BTU per hour and 11" water column of pressure. You will need to determine if this is enough pressure and BTU for your appliances. If this will work you the regulator has a 3/8" Female NPT outlet to go to your appliances.
    view full answer...
  • Parts Needed To Convert From 30lb Propane Tanks To 100lb Tanks
    100lb propane tanks typically have a female POL fitting so you'll just need to swap over the hoses to ones that have a male POL fitting and can still connect to your regulator/piping the same way the current hoses do. Most regulators have a 1/4 Female Inverted Flare fitting so you'll likely need a hose like the MB Sturgis # 100019-24. To be sure you'll just need check the fitting types on both the tank and the regulator/wherever it ties into the system. If you aren't having issues with...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Leader Hose for 100 Lb Propane Tank
    Yes, we have the correct replacement leader hose that attaches your tank to the regulator. For this you are going to want to use the MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-24 for 2' long, part # 100019-36 for 3' long, part # 100019-48 for 4' long, or part # 100019-60 for 5' long. There should already be a brass adapter on both inlets of your regautor but if not you will also need one of the MB Sturgis Propane Adapter Fitting part # 402258-MBS.
    view full answer...
  • Propane Regulator for a Modine 45K BTU Hot Dawg heater
    Yes, you should go with a dual stage like the MB Sturgis 2-Stage Propane Regulator part # 108220 for vertical or part # 108221 for horizontal because it can be adjusted to a 12" water column outlet. In order to do this you will need to remove the black cap and turn the valve until the correct pressure is achieved. This will require a flow meter so if you do not have one it will be best to take it to a professional to have done. It is currently set at 11" water column outlet which the manufacturer...
    view full answer...
  • Compatibility of MB Sturgis # 100019-24 Hose on a Dual LP Tank Set Up
    If you are connecting the 1/4 of an inch male inverted flare of the MB Sturgis Sturgi-Stay Propane Fill Hose, # 100019-24, to a regulator, then this hose will work for your application. The POL connection will fit your tanks if they have a POL connection. Most LP tanks at 100 lbs use the POL connector over the ACME Type 1 connector you see connected to the smaller LP tanks.
    view full answer...
  • Parts Needed To Connect Two 100LB Propane Cylinder Tanks to a Generator
    To confirm that you will be able to use the Camco Automatic Changeover 2-Stage Propane Regulator # CAM59005 you will need to ensure that the 11" nominal outlet pressure is enough to power your generator. This may be information that you can find in your generator owners manual or you may have to reach out to the manufacturer to get the information. The current regulator on your generator will have to be removed as the propane will not go through the additional regulator after going through...
    view full answer...
  • I Need Propane Tank to Regulator Pigtail with 3/16 ID with Inverted Flare 2 Feet Long
    I believe what you're looking for is the MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-24 this has the POL end for the tank side that will thread into the internal threads of the tank. Most of the regulators have the 1/4" inverted flare which this one also has. It is 2' overall in length as well which matches what you're looking for. Check out the attached video to see it. If this is not what you are seeking out let me know.
    view full answer...

Do you have a question about this Propane Fitting?


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Cody B
Updated by:
Cody B
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924