bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 7 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen

Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen

Item # FCE48TASL-07
lowest price pledge
Our Price: $983.90
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right For you? Product Expert Kathleen M says:

Yes, if you:

  • Drive a motorhome or truck with plenty of room on the dash for a large 7" monitor
  • Get nervous that someone might be in your blind spot when changing lanes
  • Want an easy setup process, especially if you have the pre-wired shark fin from Furrion

No, if you:

  • Haul an Airstream, toy hauler, or trailer with lots of walls that can cause interference with wireless systems
  • Often power wash your rig and don't want any water to get in and fog up the camera
Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras. Lowest Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen part number FCE48TASL-07 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (483)
  • Q & A (0)
  • Photos
  • Why etrailer?

Furrion RV Camera System - FCE48TASL-07

  • Backup Camera
  • Observation Camera
  • 7 Inch Display
  • Furrion
  • Wireless Signal
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Night Vision
  • Motion Detecting
  • Waterproof
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees

Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras.


Features:

  • Marker light cameras replace your clearance lights to improve visibility and obstacle detection for your RV or camper
    • Minimize blind spots on both sides of your RV and help prevent accidents
  • DOT compliant, waterproof marker lights with detachable cover allow easy access to replace your bulb
  • CMOS sensors create high-quality digital video in full color
  • Gives you a 65-degree viewing angle
  • 12 Infrared LED lights on the camera's housing provide night-time vision up to 39'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
  • Camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • Motion detection triggers monitor to power on
    • LCD auto-off setting lets you set your monitor to power off after 10, 20, or 30 seconds
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 7" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen let you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Quad screen displays 4 camera angles simultaneously
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • 2 Different mounting options allow you to display the monitor
    • Tabletop mount designed with 4 non-slip pads to sit on your dashboard
    • Suction cup mount secures to your windshield or dashboard
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


Specs:

  • Side camera overall dimensions: 5-1/2" wide x 3-1/4" tall x 1-5/8" deep
  • Mounting hole spacing:
    • Vertically (left side): 1-1/8" center to center
    • Vertically (right side): 5/8" center to center
    • Diagonally: 3-1/8" center to center
  • Resolution: 720 x 480
  • Voltage: 12V - 24V DC
  • Wire length: 7-1/2"
  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


Marker Light Side Cameras

Marker Light Side Cameras

The marker light side cameras are the ultimate upgrade for your RV's side marker lights. They give you the same DOT compliant marker lights with the added benefit of waterproof side cameras with LED night vision and motion detection. The cameras enhance visibility and minimize blind spots by giving you a wide 65-degree viewing angle. They also have detachable light covers for easy access to replace your bulbs.


Infrared LED Night Vision

LED Night Vision

The 8 infrared lights on the rear camera and 12 infrared lights on each side marker light camera produce a clear, quality picture. They give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Camera with Built-in Microphone and Monitor with Speaker

Cam Micro-Monitor Speaker

The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitor's speaker, providing peace of mind as you work together to safely maneuver your RV.


Rear Assist Marker Lines

No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.


Motion Detection

Motion Detection

The motion detect feature allows you to set the motion sensitivity level of your cameras to low, medium, or high. On the low setting, your cameras will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, they will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.


Auto-Off

Auto-Off

The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.


Quad Split or H Split Display

Quad-H-Split Display

The quad split or H split display allows you to view up to 4 camera angles at once (additional camera sold separately). Depending on your camera setup, you can view blind spots behind your RV or on each side of it while driving down the road or backing up.



FCE48TASH Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

FOS07TASF Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Replaces FCE48TASL-07

Alt 405203ET

Installation Details FCE48TASL-07 Installation instructions




Customer Reviews

Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen - FCE48TASL-07

Average Customer Rating:  4.7 out of 5 stars   (483 Customer Reviews)

Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras.

- FCE48TASL-07
by:

The installation was fairly easy. The trailer came prepped for the rear camera so, it was attached and linked. The side cameras involved a little work due to being close to the pass-through doors. They went on with a bit of cutting of the trailer skin. The problem is the right side trailer camera is reading that it's the left side and visa versa for the right. They are both installed correctly, facing back and the pairing button on the bottom. Also when the two side cameras paired they caused the rear camera to unpair. I re-paired the rear and now the right side ( left camera ) is unpaired. I've emailed Furrion for answers to my situation.


Comments
I dont use the side cameras as much as I thought I would. it does work nicely.
John - 04/10/2022


- FCE48TASL-07
by:

Have not been out on the road yet but the install was easy even for a novice like me. My reflection 5th wheel was prewired so it was a plug and play for the rear camera. For the side cameras I used the two screws from the previous light. I put both screws in the top holes, (one behind the camera) as that seemed to secure it better then bothe screws not behind the camera. Instructions were a bit limited(or I didn't read them) on the side camera sync but I pressed enough buttons to figure it out. Picture looks great. Do watch for obstructions such as awning supports which will limit view. I also used silicone to keep the water out.


Comments
I find that i use the rear camera much more than the side cameras so i question whether i would have bought the side cameras again. The rear camera would cut in and out on the highway so I added a longer antenna and you have to make sure both antennas are straight up and down to get the best signal. All in all i get a good view behind the 35ft trailer and would buy the rear again.
Pete - 03/26/2021


- FCE48TASL-07
by:

This camera set up is a great addition to our Rv. However it’s not quite as advertised. Our 2022 RV that we just purchased came pre wired for these specific cameras but it is not wired for the whole security set up and the cameras can only be seen on the monitor when the running lights are on the Rv are on which only come on when hooked up to the truck and are on on the truck. The “trigger” for the side cameras would be the directional also not wired in on the marker lights on the RV thus a waste of money for the side cameras and security monitoring. Without the directional trigger while driving, only the back up camera is viewed on the monitor.Also there is no power supply for the monitor for in the RV. Great technology but falls short for plug and play.


Comments
When mounted in the cab, the monitor typically works as an observation system together with a Furrion rear mounted camera to see the back, and two side cameras, for traffic observation. When mounted in the coach, the monitor typically works as a security system together with a Furrion doorway camera. In order to keep the cameras on when not hooked up to your truck you will need to wire it by running a power wire to each camera then connecting them to a switch like item # 37212225
Single Rocker Switch - On/Off - Black
$10.19
. The switch will go directly to the battery in your trailer. You will need to turn the switch on while towing too, or the cameras will not be on. You should also add a 12V outlet in your trailer for the monitor to plug into when you are in the trailer like item # 37215105
12V Power Outlet for RVs - 1-7/16" Diameter - Hardwire - Plastic
$14.06
.
-- Etrailer Expert Sierra K - 12/30/2021


- FCE48TASL-07
by:

Camera system works great. It connects quickly after turning on headlights. While driving, I have complete confidence of seeing the traffic behind me. I have the three-camera system, but I keep my screen on the rear-view only so that the rear-view image takes up the entire display. High quality image. Easy initial setup. Just choose option(s) of how you want image to display. The only negative, the image disappears sometimes. It is rare and the image comes back quickly. Will buy this setup again for next trailer I purchase.



- FCE48TASL-07
by:

Website description said these cameras were for a 2018 Jayco Feather but I have a 2022 Jayco Feather 24BH and knew they would work because they're the same ones the dealer sells. In the installation video it noted to also order the wire shrink butt connectors but they weren't needed for the 2022. From the factory there were some easy quick snap disconnects (see pictures) already installed and the side marker lights are higher on the coach and access to the wires were inside the forward storage compartment. Install took about 1 hour for all three cameras but I spent more time than I wanted to in order to figure out how to get power to the cameras (indicated by the blue LED light on the camera casing). Turns out I had to turn my Ford F150 headlights off from AUTO to ON and then I was able to finally pair each camera without any issues. Pics below show the side lights as they were wired from the factory. Just removed the panels inside the front storage area to access the lights. Didn't have to run separate trigger wires either like the video said. Just take a picture of your wires before disconnecting them and then wire it back up to the same quick disconnects. Easy peasy.



- FCE48TASL-07
by:

I purchased the three Furrion Camera System which includes the rear, left and right side views. Overall the system is excellent with sharp, real time views. I had a cheaper rear camera on a different camper and while the view was fair, it does not compare to the Furrion. Coming home from Pennsylvania last August, we ran into some heavy rain. The right side camera began “clouding” up due to moisture inside the camera lens. Since the system was still under warranty, I contacted Furrion by email (they don’t take calls apparently) and their representative instructed me how to get a replacement. The process was relatively easy and I had a replacement camera within two weeks. Furrion customer service worked well. However I just got my travel trailer back from have some warranty work done and when I hooked up my monitor, the left side camera was cloudy. I went through the same process and I just received word that a replacement was on the way (save your emails). Even with the two side cameras having issues, I would still give it five stars due to customer service. Hopefully the new side cameras will stay clear (as they should even in wet weather) and the cameras I had replaced were just in a defective group.



- FCE48TASL-07
by:

I love these cameras and display screen. Being able to see what is behind and beside us when we travel is priceless. I tried a different brand camera system before and learned a hard lesson when it caught on fire. I’ll only use Furrion from now on and recommend Furrion to family and friends.



- FCE48TASL-07
by:

I'm giving etrailer 5 stars on sales and delivery. I just received the camera system but haven't installed it yet. Get back to you on a later date.



- FCE48TASL-07
by:

Install was easy everything went well I wish the side marker cameras could be adjusted to get a Veiw of the side of the camper. It would give a Mark to line up with.


Comments
Everything is working well. I would purchase again
David - 02/09/2022


- FCE48TASL-07
by:

I absolutely love this camera system. I don't necessarily use it to back up but it is invaluable in metropolitan areas when there is heavy traffic. When changing lanes it is great to know what is around you. The only issue I have is that the camera will switch from rear view to side view, we haven't figured that out yet. That being said I still would not want to be with out this camera system.



- FCE48TASL-07
by:

Installed this myself. Took about 6 hours. Finding the correct wire to splice was the worst. The picture is before the forever install.



- FCE48TASL-07
by:

I have install the product. It was super easy. I will be giving it a good workout in June. Hopefully I can update with a user review.


Comments
Fantastic
Al - 05/17/2022


- FCE48TASL-07
by:

The install was easy after watching the etrailer installation videos. The rear camera already got me out of an unsafe situation on the highway! I gave 4 stars due to the side marker camera angle. I wanted to see the sides of my physical trailer so I had to cut wedges to get the angle.



- FCE48TASL-07
by:

The cameras work very well. The problem I have with it is that when I set the cameras to watch which parts I want to see, after a few seconds it reverts back do what it wants to show me, the rear view.


Comments
I asked the manufacturer if there was a way to see your other cameras for longer without it reverting back to the back-up camera and here is how you do it: To hold a view, the monitor needs to be set to LCD AUTO OFF. You may need to modify the instructions to fit your needs, like quad view vs tri view, etc. but the steps are the same. #1 MENU to SETUP to LCD AUTO OFF : Please make sure the X is marked red so the screen does not automatically time out. #2 MENU to SETUP to AUTO DISPLAY : Please choose the preferred layout and make sure that the auto-display function is turned off in WHITE. #3 Tap the main screen two times and choose VIEW ALL to hold the view to all cameras vs a particular view.
-- Etrailer Expert Sierra K - 12/21/2021


- FCE48TASL-07
by:

Installed quite easily, installed all 3 camera in 30-45 minutes. The 2 side cameras I don't use that often, while they work great, I just find I don't use them too often. The rear camera however, I've found great going down the highway. The rear camera is awesome with allowing the sight at the back of the trailer to cleanly pass and re-enter the left lane. Also it makes it great to back into spaces with a clear view of what's behind the trailer. I would recommend this system to everyone and would buy it again.



- FCE48TASL-07
by:

After looking at several sites, etrailer came out on top and IN STOCK! Got the order in 6 days and NO shipping. First time buyer but now know where to look first!



- FCE48TASL-07
by:

DO NOT BUY IF YOU DRIVE A NEW TRUCK. After purchasing these I found out it is a known issue that if you drive a 2020 or newer truck these cameras will not work. After speaking to furrion support their only recommendation was to rewire the whole trailer so the cameras could connect to the trailer battery.



- FCE48TASL-07
by:

Works great. Excellent safety feature when pulling an RV. I can confidently know when someone is close behind or on either side when making lane changes. Excellent customer service from the manufacturer when setting it up. The instructions in the kit are lacking everything that you need. But after getting help it had worked great.



- FCE48TASL-07
by:

We are less then happy with the monitor. The monitors clarity is lacking, and it does not seem to get bright enough or clear enough. It is very difficult to actually see what’s going on behind you with the quality of the monitors screen. We had an older back up camera on our 2007 Lance camper that the clarity of the monitor were far superior to this one. We do not recommend this camera system to anyone because of the monitor.



- FCE48TASL-07
by:

I have used for one year and 12,000 miles of travel. I have worked very well. I find that I use the side marker cameras very little. I prefer to have the rear camera fill the screen I check on following cars and only change lanes when I can see the car I just past in the back camera, my car does extended blind spot warning for trailer towing so that help. I would definitely buy this system again.



- FCE48TASL-07
by:

The system works great as advertised, I especially enjoy the large screen view as I drive RV on highway. What gives it 3 stars is the system only views the three camera screen for a minute or two then reverts back to default rear view screen. Very frustrating trying to park RV when the side cameras disappear and I have to keep touching the screen to get the three camera screen. Would be five star system if I could set the rear camera default time longer. It defeats the purpose of three cameras if they appear for such a short time. I have a 40ft 5th wheel and I sometimes need 10-15 mins to back into a tight site.



- FCE48TASL-07
by:

The cameras work great. The set up wasn't as easy because Forest River has the plug and play set to the back up lights. So if you do their install the camera will only work when you are backing up. Not what we wanted. A quick google search found someone with a Forest River/Surveyor trailer who gave the instructions to hook it up to your clearance lights. So that's what we did.



- FCE48TASL-07
by:

I had a few issues but they have been taken care of by both etrailer and Furrion. Great Product



- FCE48TASL-07
by:

This was easy to install and will ad value if we every sell our RV. I haven't really had the need to use it though as we always try to get a pull thru site.



- FCE48TASL-07
by:

I was very impressed with the knowledge and helpfulness. Kaylyn was fantastic.


26
497
Show More Reviews

Ask the Experts about this Furrion RV Camera System



  • Side Camera Kit Setup for Trailer to Help Know When Vehicles are Completely Passed
    Yes, the side camera kit part # FCE48TASL can be used as a way to know when you've passed someone on the highway. We have an entire kit that includes the side cameras, a rearview camera, a 7 inch monitor plus motion sensors with the part # FCE48TASL-07 which would be your best option. This will trigger the side cameras automatically when you are passing a vehicle or one is passing you.
    view full answer...
  • Can the Furrion Camera System with Marker Lights Be Used On Trailer with LED Side Marker Lights
    The Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07 can be used on a trailer with LED side marker lights. There will be no issue with power draw/consumption. The new side marker lights/cameras will draw the amount of power they need which is not limited by the side marker light it replaced but rather the circuit's capacity. The trailer clearance light circuit on the tow vehicle is not geared only towards LED so you won't have any issue with power. I spoke with...
    view full answer...
  • Is Furrion Vision S Side Marker Light Camera Kit Compatible with Older Furrion 4.3" Monitor
    Thank you for the part numbers and I'm glad you asked! The Marker Light RV Side Cameras w/ Night Vision # FCE48TASL are designed to work with the newer Furrion Vision S camera systems so you will need to upgrade your current system to add this kit. To upgrade your system we actually have complete kits that come with the side marker light cameras. For a 5" monitor use kit # FCE48TASL-05 or for a 7" monitor use kit # FCE48TASL-07. I would say that you could possibly add an older Furrion...
    view full answer...
  • Comparing Two Furrion Vision S Observation Camera Systems
    The Furrion Vision S # FCE48TASL-07 you reference is not the same camera system as the Furrion FOS05TAEN you mention. Instead, you'll want the Furrion Vision S Wireless RV Observation Camera # FCE48TASL-05, which is the same as the Furrion FOS05TAEN. This product contains 12 infrared LED lights for night-time viewing up to 39', features a quad screen view to display 4 camera angles simultaneously, and is made up of a durable metal construction that is dust and water resisitant.
    view full answer...
  • Furrion 3 Camera System for 2021 Jayco Jay Feather 27RL Camper
    For your 2021 Jayco 27RL I recommend the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen Item # FCE48TASL-07. This system has the three cameras and 7" monitor screen you're wanting and is Furrion branded so you'll be able to easily install this on your camper.
    view full answer...
  • Will Center Ladder on RV Get in Way of Rear Camera on Furrion Vision S System
    We haven't tested installing the Furrion Vision S Kit # FCE48TASL-07 between a ladder like what you're asking so I can't really speak to that, but I would be surprised if the ladder doesn't have any impact in what you can see. I did a quick search and it doesn't look like we have address this before so the only solution I can really offer is if you still want to go this route with a camera then try holding the camera up first to see what kind of view you will get prior to permanently installing...
    view full answer...
    Image 1 for
  • What are Display Options for Showing Multiple Camera Angles with
    Oddly enough there isn't a way to just have the three views without the block for the fourth. You can either do the quad split or the H split with four slots always.
    view full answer...
    Image 1 for
  • Can I Install The Furrion Vision S Wireless Camera On My 2004 Newmar Kountry Star Motorhome?
    Absolutely, you can install the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07 on almost any RV, even your 2004 Newmar Kountry Star Motorhome. You will not only get side marker lights and cameras, but also a backup camera as well! This is a nice system for what you want as it comes with a screen to monitor the blind spots without having to tap into your existing RV Radio Screen. It is easy to install after watching Dave's install and...
    view full answer...
  • What Diameter Ball Does The 7 Monitor For Furrion Vision S Wireless RV Observation System Use
    The 7" monitor included with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen # FCE48TASL-07 you were looking at uses a .85" diameter ball for mounting. If your existing mounts are not .85" you can use the included suction cup mount. I included a video of the Furrion Vision S # FCE48TASL-07 for you to take a look at.
    view full answer...
  • Will the Furrion Vision S Side Marker Lights Cameras Work with a 2019 Vanleigh Beacon
    I was able to look up your 2019 Vanleigh Beacon and look at some pictures pertaining to the ac plug with cover you mentioned. I don't foresee that causing an issue with using the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07. The camera actually faces slightly outward when mounted (I have included a picture that shows the camera mounted). You can see in the picture that there is an obstruction just in front of the camera and that the...
    view full answer...
    Image 1 for
  • Will Furrion Vision S Wireless Camera System Fit a 2022 Gulfstream Vintage cruiser 19ERD
    It sure will! The rear camera for the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-07 will mount directly to the bracket at the rear of your 2022 Gulfstream Vintage cruiser 19ERD and you can replace your current marker lights with the marker lights/cameras. Attached is a review video for you to check out.
    view full answer...
  • Best Mounting Location for Side Marker Cameras for Furrion Vision S Wireless Camera System
    I recommend installing the marker side view cameras from the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-07 at the forwardmost clearance light position so that you get the best visual at what is on the side of your trailer, whether it would be a vehicle while you're driving or something at the campsite if you plan on also using the cameras as an observation system.
    view full answer...
  • Can I Get A Turn Signal Camera Or Am I Limited To A Blind Spot Camera
    Typically the cameras associated with turn signals are blind spot cameras. They are mounted in a different location than the side marker light cameras would be. The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen, part # FCE48TASL-07, is considered a blind spot camera. We do not offer a camera that is integrated with your vehicle's turn signals. The camera you showed interest in does have some nice features. The cameras are all waterproof....
    view full answer...
  • Could Furrion Vision S Camera System be Used on Motorhome for Blind Spots
    You could use the Furrion Vision S Wireless RV Observation System # FCE48TASL-07 on a motorhome and it would give side views to help with blind spots. You'd just have to run power to the sides of the motorhome for the side cameras. Typically it's the running light circuit used for this. With this setup though you can run the monitor in a grid mode to allow you to see all views at any time too which would be great for blind spots. This does come with a wiring diagram.
    view full answer...
  • Do New Power Wires Need To Be Ran When Installing the Furrion Vision S Wireless Camera System
    In regards to the Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07, you shouldn't need to run any new power wires so long as you already have a similar system in place. The main overhead camera will simply just use the same power wire your existing system uses. If you did not have an existing power wire you could just run a wire up spliced into the running light or back-up circuit but this does not pertain to you since you already have a system in place that you...
    view full answer...
  • Which Circuits Need To Be Tied Into When Installing the Furrion Vision S Camera System
    The Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07 has two side cameras and a rear main camera. The rear main camera can be wired to either the running light circuit to display whenever the vehicle's running light's are turned on or to the reverse light circuit to display whenever the vehicle is placed into reverse. The two side cameras must be wired to the running light circuit, not the turn signal or reverse light circuit. I have attached a photo to assist...
    view full answer...
    Image 1 for
  • How To Wire the Furrion Vision S Wireless RV Observation Camera System So the Cameras Stay On
    The Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07 is designed to be tied into either the running light circuit which would allow the system to be used when the running lights are on in the tow vehicle or the reverse light circuit which would allow the system to be used when the tow vehicle is in reverse. This would hold true for both the main and side cameras. It sounds like you are wanting to tie the system into a constant power source so you can use the...
    view full answer...
  • Will Furrion Vision S Wireless RV Observation Camera System Work on Metal Trailer
    Yes, the reception of the Furrion observation systems like the part # FCE48TASL-07 that you referenced is so good that metal trailers and vehicles won't be an issue at all. Of all of the wireless camera setups this brand has the best reputation for great reception. This will give you a really great way to see behind your trailer and to the sides!
    view full answer...
  • Recommended Furrion Vision S System For 2020 Forest River Flagstaff 21FBRS Pre-Wired
    Since the 2020 Forest River Flagstaff 21FBRS Micro-Lite is pre-wired for a Furrion system the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen part # FCE48TASL-07 will work well for you. The backup camera will fit into the existing bracket on the back of the trailer and plug right in. The side cameras may require drilling into the side of the trailer to fit them if you do not have side camera brackets pre-wired on the trailer. The side cameras...
    view full answer...
  • Side Camera for Furrion Camera System
    The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen # FCE48TASL-07 is a great system that will allow you to have the side cameras. You don't need to replace your current LED's if you like them you will simply add these in addition. The Furrion system only has the side cameras that are integrated into the lights. The bulb may be replaced with an LED replacement if you want all LED lights. There are side camera that don't include a light...
    view full answer...
  • Is Image of Furrion Vision S Mirrored
    The image on the display of the Furrion Vision S part # FCE48TASL-07 can be flipped to either mirrored or not so whichever you prefer it can do.
    view full answer...
  • Adding Furrion Vision S Wireless Camera System to Existing Back-Up Camera
    What I think you are asking is if you can install a new Furrion Vision S Wireless Camera System, # FCE48TASL-07 that has side marker lights, and a back up camera with a 7" screen can you also pair the currently installed camera with all being viewed on the same 7" screen. As long as the currently installed camera is Furrion "S" (being on a 2020 model RV from OEM it probably is) yes you can do so. I contacted Furrion to inquire about wireless cameras being paired to two devices at the...
    view full answer...
  • Replacing Furrion Camera System FOD43TA-BL for Unit with 7 inch Monitor and Side Cameras
    Your Furrion camera system FOD43TA-BL is the older style and would not work with the current Furrion Vision S series of cameras. So you'd need an all new system. So since you wanted the 7 inch monitor that has side cameras as well you'd want the part # FCE48TASL-07 that you referenced.
    view full answer...
  • Installing A Furrion Side Marker Camera In Limited Space Situations
    The side marker cameras for the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen Item # FCE48TASL-07 are usually installed on the rear side markers and not on the front ones. If you still want to install them in the front you can drill a hole above the compartment door and run the wires from the camera down and tie them into the existing side marker lights to avoid any space issues and you'll just have an extra side marker light. I've attached...
    view full answer...


< Previous
123. . .10



Do you have a question about this RV Camera System?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv camera system for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Michael B
Installed by:
Michael B
Employee Adam Y
Written by:
Adam Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624