bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 7 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

lowest price pledge
Retail:$745.54
Our Price: $650.95
You Save: $94.59
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight. Lowest Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen part number FOS07TASF can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (513)
  • Q & A (0)
  • Photos
  • Used (1)
  • Why etrailer?

Furrion RV Camera System

  • Backup Camera
  • Observation Camera
  • 7 Inch Display
  • Wireless Signal
  • Furrion
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.


Features:

  • Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
    • Supports up to 4 wireless cameras (additional cameras sold separately)
  • Camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 7" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen let you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Motion detection triggers monitor to power on
    • Auto off setting lets you set your monitor to power off after 10, 20, or 30 seconds of inactivity
  • Quad screen displays 4 camera angles simultaneously
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • 2 Different mounting options allow you to display the monitor
    • Tabletop mount designed with 4 non-slip pads to sit on your dashboard
    • Suction cup mount secures to your windshield or dashboard
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


Specs:

  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


Infrared LED Night Vision

LED Night Vision

This camera has 8 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Camera with Built-in Microphone and Monitor with Speaker

Cam-Mic-Monitor Speaker

The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitor's speaker, providing peace of mind as you work together to safely maneuver your RV.


Rear Assist Marker Lines

No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.


Motion Detection

Motion Detection

The motion detect feature allows you to set the motion sensitivity level of your camera to low, medium, or high. On the low setting, your camera will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, it will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.


Auto-Off

Auto-Off

The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.


Quad Split or H Split Display

Quad-H-Split Display

The quad split or H split display allows you to view up to 4 camera angles at once (additional cameras sold separately). Depending on your camera setup, you can view blind spots behind your RV or on each side of it while driving down the road or backing up.



729936 Furrion Vision S Digital Wireless Observation System - Night Vision - Rear Mount - 7" Screen - Touchscreen

FOS48TA-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor - 4.3" Screen

FOS48TAPK-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor and Bracket - 4.3" Screen

Replaces 729936

Alt 405069ET

Alt 110379

Item # FOS07TASF






Customer Reviews

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen - FOS07TASF

Average Customer Rating:  4.7 out of 5 stars   (512 Customer Reviews)

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.

by:

Haven’t had long but I really like it, bought this to go on my enclosed trailer because I go into areas that I need to turn around which requires backing up and some are really tight and the way I turn I can’t see what is behind me, this helps alot


Comments
After having this for a year i am glad i got it, its like having a second person to guide me backing up, i really like the motion sensing and all, I definitely feel more confident maneuvering around in tight areas and backing up to my house
James - 09/12/2021


by:

Camera worked just fine on our 2017 GMC Sierra, but when we traded the truck in for a 2021 GMC AT4 the camera no longer worked. It seems the electric system doesn't support the camera and Furrion has not made an adapter...a year later! The camera sits in a closet until there is an adapter that fits. Waste of $600 for us.




by:

Order was left in front flower bed by USPS. Not so great for them. It took longer to check the items in the box than it did to install the camera. Longest was getting the ladder set up so a 75 year old person could safely reach the bracket on my Windjammer 3029W. Attached truck to the trailer for marker lights and camera scene came up immediately so apparently paired already.

Thanks again for prompt service and providing a great product.




by:

This camera system is a must-have!
I
had it installed for me so I can't speak as to ease of install, but they didn't mention any issues.
I have never had an issue with connectivity. My trailer is 21' and there is about 33 feet from the monitor in the truck to the camera on the back. Nighttime view is great (see picture.)
I travel solo and it lets me back up without a spotter and without having to GOAL every foot and a half to see where I am. Knowing where traffic is around me on the road is a a huge safety benefit. It helped me avoid an accident on the freeway last summer. I had just passed a slow moving vehicle and was signaling to go back into the right lane when a low sports car decided to pass that vehicle as well without waiting for me to get back over. It darted around it and went between it and my trailer, cutting them off and passing me on the right. He was completely hidden in all mirrors and windows due to being so low and in my blind spots, but I spotted his movement in the camera and stayed in my lane until he flew past. Another couple seconds and I wouldn't have been able to correct back. If it wasn't for the camera, I believe there would have been an accident.
The hardest thing to get used to is the reverse view. I wish CW had done the step to change mirroring the view. When I see a car on the right in the monitor, I have to remember they are really on the left of my rig. Apparently there is a way to flip this to normal view but I haven't been able to do it yet.
The monitor plugs into the cigarette lighter in the cab of the truck and I purchased a vehicle-specific mount for it from [online store]. I put an XL Scosche magnet on the back of the monitor.And a Scosche magnetic holder on the mount. It holds well through all seasons and is easy to take off when not in use.
I would definitely purchase this again and have recommended it to others.




by:

Great product and excellent service from etrailer. I have the camera on a 43’ fifth wheel and reception is great!




by:

After some research I purchased this system and couldn't be any more happier! Easy to install , I mounted below the center upper clearance light and wired to that light after I accessed the factory wiring. Instructions were very clear and setup was a breeze. Pairing the camera with additional side camera's was no trouble. The 7" monitor is great and the picture's are very clear ,the sound is great as well from the rear camera. I would highly recommend this product, great quality and ease of installation due to wireless features.




by:

Couldn't be better! Originally ordered a 4.3 inch screen, but changed to a 7". It cost a bit more, but I'm (and my wife) are ecstatic. Installation was a breeze. Fine folks to work with!


Comments
It was simple to install and we love it.
Tom - 04/15/2022


by:

I hear these are great. I just haven't installed yet as temperatures in Iowa are in the upper 90's right now! Will try to follow up!




by:

Simple installation and very good instr uctions.


Comments
Excellent
William - 05/12/2022


by:

Camera works great easy to install and etrailer great to deal with.




by:

Cameras work great. They are every bit as good as the OEM equipment on our car. I drive with them on continuously to be aware of traffic around my 5th wheel.




by:

Installation was a breeze due to our 2020 Grand Design 2670MK TT being pre-wired for this camera. Performance has been somewhat disappointing, though. Up front, in the cab of our pickup, the pic quality is adequate with fairly low signal strength. I intend to experiment more with a different antenna. We have not tried this device in low-light or no-light conditions. Note: Some RV's, such as our GD, have pre-wiring that only provides power to the camera only when the running lights are on. This is fine with us; but others may not like this setup.


Comments
After 1 yr, I still would give it 3 stars. We have the single camera setup. eTrailer is always great to work with but I would say this product is adequate at best. Display resolutionbrightness disappoints. Nerds might do better with a homebrew solution...which is ultimately where I think Im headed.
Kevin K - 09/26/2021


by:

Everything was easy to install on my prewired camper. The only issue was i couldn't get the camera to power on. After two days of troubleshooting, I found out that my truck headlights had to be on to supply power to the camera. Now everything works fine.




by:

Very happy about the product and the service with ETRAILER.COM.




by:

Service was GREAT staff was very helpful . Installation was pretty simple. Product works nice. Hope to add side camera later.




by:

One year and still working and worth every penny. I tow a 40 foot 5th wheel and having a back up camera is a must. Installation was not complicated (pre-wired for this product) and the wireless connection is 90% reliable. The mount system is not the best so I installed an after market mount using BulletPoint magnetic mount system to keep the monitor stable and in a good viewing location on dash of my RAM 3500.




by:

Because our Jayco Eagle fifth wheel was prewired, installation was quick and easy. The one issue I have is we bought the 7” screen and it takes up a lot of the windscreen if I attach it with the included suction cup. Instead I lay it on the dash using the desk stand. Along with hand signals from outside the rig, we use the camera to look for any obstacles behind the rig. It also comes in very handy on the road to help ensure we’re clear if passing another vehicle.




by:

I received the correct item that I ordered in a timely manner, intact and in working order. The installation instructions were easy to follow.
The operation Of the system, and picture quality are very representative of the reviews I read online.
I very pleased with both the quality of the product and professionalism of etrailer.


Comments
Absolutely no issues or complaints.
Jimbo W - 08/13/2021


by:

Delivery time was quick, was here in a few days. The camera system works great. The setup and installation was easy. Watching the videos that are available on the website is very helpful. Very pleased with my purchasing experience. I always check ET first. Especially knowing that if I find it at a lower price you will meet that price plus 10%.


Comments
I have had the Furrion Vision for a year. It has performed great. It has made backing my 5th wheel easy. Its well worth the investment. I would certainly recommend it.
David - 05/20/2021


by:

Brett G is a fantastic customer rep, when my order wouldn't go through he was right there to help me every step of the way. He also called with follow ups on my delivery.. he was fantastic we need more wonderful people like him. He was truly amazing and I didn't have any anxiety what so ever. Oh and my product is exactly what we wanted.




by:

I received the camera system on the date expected. It was installed same day and was no problem being my unit was pre wired for this system. I haven’t tried it on the road yet but will take a week long trip next week. So far the camera is clear and very good range. Thanks for the prompt service as always.




by:

This is the perfect fit for my trailer that is pepped for the Furrion




by:

It is a true asset to make backing up e asier.


Comments
Well worth the money. Best accessory for any RV.
Eddie - 03/26/2022


by:

The 7" monitor is great as an effective rear view mirror. I look forward to installing the side view cameras, but for now I only have experience with the rear view camera.
The camera is great at daylight and serviceable at night (headlights tend to blind the camera a bit). As an unexperienced new owner of a travel trailer, I value the ability to better judge the distance of a car. When a car I passed shows up in the camera, it is definitely behind the trailer...

I want yo mention one complication with my VW Touareg, though: As with several modern vehicles, the Touareg has some AC signal modulated onto the 12V for the rear lights. The car uses this signal to identify failing lights. The Furrion cameras cannot handle power that is 'contaminated' with such modulation. Therefore I had to modify the electric system of the trailer. I am feeding the rear- and position-lights now from the battery of the trailer. I added a weatherproof 12V relay that takes the car's modulated 12V to switch the clean 12V power from the battery. This way I don't accidentally drain the battery and the functionality is as intended.
Well, I guess the Touareg cannot detect a broken bulb on the trailer any longer...




by:

Trailer was prewired so it was an easy install, plug and play. I talked with Helen T who helped with my questions. Product arrived on time as promised.



25
512
Show More Reviews

See what our Experts say about this Furrion RV Camera System



  • Will Furrion Vision S Camera Work With 2019 Dutchman Kodiak Ultra-Lite Pre-Wired for Furrion System
    Yes, it absolutely will! Since your 2019 Dutchman Kodiak Ultra-lite 261RBSL is pre-wired for a Furrion observation system, the Furrion Vision S Wireless RV Backup Camera System with Night Vision - 7" Screen # FOS07TASF will work to perfection. It's a great idea to go with the larger 7 inch screen as well to give you the best way to view your surroundings. I have added a link to a video review for you to check out as well of the Furrion Vision S Wireless RV Backup Camera System # FOS07TASF.
    view full answer...
  • Can the Furrion Vision S Camera Be Used To Replace the Center Overhead Clearance Light
    In regards to the Furrion Vision S Wireless RV Backup Camera System part # FOS07TASF, the reason you don't see the camera mounting bracket used in place of one of the three overhead clearance lights is because these lights (all three) are required by law for trailers that meet certain size/weight etc. so you risk a fine if one or all are removed. Therefore, I must recommend you install the camera mounting bracket below or above the three lights. You can still power all three lights and...
    view full answer...
  • What Circuit Activates The Pre-Wired Furrion Backup Camera In Keystone Montana
    Thank you for the positive feedback David. The Furrion Vision S Wireless RV Backup Cameras like part # FOS07TASF are activated by the running light circuit so you would need to have your running lights on to activate the camera. However, I have heard that some pre-wired systems have the backup camera wired to a constant power source so they could monitor the outside while they were camping. This was not on a Montana though from my experience. If the newer Montana's are wired for constant...
    view full answer...
  • Is Replacement Monitor Available for 7" Furrion Vision S Monitor
    The only way to replace the 7" Furrion Vision S monitor is to unfortunately purchase a new kit like part # FOS07TASF. I'm not sure why Furrion doesn't make the monitor available by itself (because I know that it is frustrating to have to get an entire kit just for the monitor) but when we have reached out to them (multiple times) they simply don't make the monitor available by itself. We do carry other monitor/camera solutions that have replacement monitors readily available so if you'd...
    view full answer...
  • How to Reverse Display on Furrion Vision S RV Camera System
    Yes, you can absolutely flip the display on the monitor of your Furrion Vision S Wireless Camera System # FOS07TASF so that the cars passing you on the left actually show up on the left side of the screen. On the monitor you just need to select "SETUP" from the menu and then select "PICTURE". After getting to the picture menu there should be an option for "MIRROR" and this is where you can select how you want the images to actually appear. This will let you switch around the display so...
    view full answer...
  • How Does Furrion Vision System w/ Night Vision # FOS07TASF install On Trailer Without Pre-Wiring
    The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS07TASF comes with everything needed to install on a trailer that was not pre-wired like yours. The key is connecting the wire of the mount from to the running light circuit so that it comes on any time you decide to turn on that circuit. It comes with wire that you'd run to that circuit and then on the other end it easily plugs into the back of the mount.
    view full answer...
  • Troubleshooting Furrion Vision S Prewiring Not Active on Fifth Wheel
    The wiring for the camera of the Furrion Kit part # FOS07TASF has two wires that need to be ran to turn on. The red wire would connect to the running light circuit power wire and the black to a ground. If your pre-wiring isn't active you could try tracing it back to where it connects to the running light circuit and I imagine that's where you'll find the issue. Or to bypass you can use included wiring that came with the kit and run it to the running light circuit like I mentioned.
    view full answer...
  • Troubleshooting Furrion Side RV Camera Setup that Shows Wrong View for Rear Camera
    Can you verify that the side cameras are getting power? Sounds like they maybe aren't wired up. You probably need to sync the cameras to the right display option. If you go the menu and select pairing, the location that the cameras are paired to will have a red link by it. From there you can move the rear camera to the correct view selection.
    view full answer...
  • How To Set Quad Mode As Default On Furrion Vision S Wireless RV Backup Camera System
    There are different versions of the Furrion Vision S Wireless RV Backup Camera System part # FOS07TASF. If the unit was made between August 2018 and January 2019 then there is no default quad model. However, if the unit was made outside of the dates above then you can use a default quad mode by navigating through the menu settings on the monitor and then selecting quad mode as the default. In order to see when your unit was made, you need to look at the serial number on the back of the...
    view full answer...
  • How To Pair Monitor Of Furrion Vision S Wireless RV Backup Camera System To Rear Camera on RV
    When you want to pair the monitor of the Furrion Vision RV system part # FOS07TASF to another camera go to the menu on the monitor. First select "pairing" then select "rear cam". The system will then search for that camera and show chain link symbol once it is successfully paired next to the camera. I have attached this section of the installation instructions from the camera.
    view full answer...
    Image 1 for Image 2 for
  • How to Pair Furrion Backup Camera To Monitor In Place of Door Camera
    While there isn't a way to "unpair" the door cam, pairing a different camera will accomplish what you need to allow you to use the Furrion Vision S Wireless RV Backup Camera System # FOS07TASF. Before attempting to pair the rear camera, make sure both the camera and monitor have power supplied during pairing and setting processes. Note that the vehicle may need to be running. 1. Press the Menu button on the right of the monitor to turn on the monitor and enter the Menu Setting page. 2....
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Recommended Backup Camera to Use with Furrion Pre-Wired Bracket on 5th Wheel with 2019 Ford F-250
    The Furrion Vision S Wireless Backup Camera System # FOS07TASF that you were looking at is designed to plug right into the pre-wired bracket on your new 2020 5th Wheel Trailer and is exactly the system I would have recommended. This will include a full color 7" touch screen monitor for easy viewing and the camera itself features 8" infrared LED lights for night time vision. This system, along with all the other backup camera systems we have available, will only work with their own monitor....
    view full answer...
  • Installing Furrion S Vision Observation System to Pre-Wired Bracket on Camper
    We don't yet have an installation video showing how to mount the Furrion Vision S Wireless Observation System # FOS07TASF to the pre-wired bracket on your trailer, however I am glad to help walk you through this process. The bracket already on your camper should essentially be identical to the shark fin bracket that comes included with this kit (the bracket included just won't be used). All of the splicing on the camper's pre-wired bracket has already been done at the factory. All you...
    view full answer...
  • Recommended Camera System for Pre-Wired 2019 Keystone Montana
    The pre-wired bracket on your new 2019 Keystone Montana 3701LK will only plug into the corresponding Furrion camera systems like the Vision S # FOS07TASF, which is my personal recommendation. That's not to say though that another brand system couldn't be installed on your trailer, it's just that it wouldn't offer a plug-and-play install into that bracket. You would need to hardwire the camera into the trailer's running lights or reverse circuit for power and would likely need a new bracket...
    view full answer...
    Image 1 for
  • Wiring Guide For The Furrion RV Side Camera W/ Night Vision
    For your LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FOS07TASF you will want to follow the wiring as provided below: RED: Connects to positive wire on running lights circuit. BROWN: Will connect to the positive wire on your vehicle's running lights circuit. BLACK: Ground wire YELLOW: Is the trigger wire, and is only used in LED versions.
    view full answer...
    Image 1 for Image 2 for
  • Will the Furrion Vision S Wireless RV Backup Camera Systems Work With Ford In-Dash Monitor
    The Furrion Vision S Wireless RV Backup Camera Systems aren't cross compatible meaning they must be used with their own camera and monitor. Therefore, you'd need a complete kit such as the Furrion Vision S Wireless RV Backup Camera System part # FOS07TASF. Unfortunately, we don't offer any camera systems compatible with in-dash factory monitors. The only way to obtain one of these systems is directly from the dealer.
    view full answer...
  • Would Furion Vision S Camera Bracket be On 2012 Itasca Cambria 30C
    In 2012 the RV manufacturers weren't equipping their campers with camera brackets so most likely what you have on your 2012 Itasca Cambria was added later on. There's a really good chance it was a Furrion setup which the part # FOS07TASF would fit right to but even if you had a different brand bracket this kit comes with a new one so worst case scenario you'd just have to replace the bracket which is pretty simple.
    view full answer...
  • Recommended Replacement For A Magnadyne MobileVision RV Camera System
    We do not carry the Magnadyne MobileVision line of camera systems so I unfortunately do not have a replacement rear camera for your 2011 Winnebago Sightseer. If you need to completely replace the system on your motorhome then I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen # FOS07TASF. This wireless backup camera system has a waterproof camera with night vision. The touch screen, anti-glare monitor mounts to your dashboard and...
    view full answer...
  • Do Headlights Need to be on for Furrion Vision S Camera to Work
    Yes, every trailer that has the pre-existing wiring for the Furrion Vision S, like # FOS07TASF that you referenced, powers the camera via the running light circuit. So you will need to have the trailer wiring hooked up to your tow vehicle and the headlights on to power the camera. The only exceptions to this are when people make their own connections to a different power source.
    view full answer...
  • Furrion Vision S RV Backup Camera Compatibility With A 2020 Leisure Travel Van
    They aren't going to recommend making any alterations to your Leisure Van electrical system for liability reasons. Since the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen # FOS07TASF is a completely separate wireless system that will just tie into your reverse lights (powers on when you back up) or your running lights (powers on any time you turn your lights on) so it shouldn't affect the factory camera or in-dash monitor. I've attached a couple...
    view full answer...
  • Trouble Shooting Furrion Vision S Wireless RV Backup Camera Wont Unpair.
    Sometime the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen # FOS07TASF will need a little longer than 15 seconds, I think they count slower than we do. Try going through the process again but hold it down for at least 20-30 seconds. If that does not work remove the camera system from all power sources and let it sit for for a long period of time, at least an hour, this will hard reset the system and then try to unpair the device then.
    view full answer...
  • How to Un-Pair Camera for Furrion RV Observation System # FOS07TASF
    You will need to un-pair the camera, the Furrion RV Observation System # FOS07TASF and pair again. The correct way is to press the button at the bottom of the camera itself and hold it down for at least 15 seconds. Then follow the pairing steps again as outlined in the instructions manual and also attached here. If the above steps do not/have not been successful, you will need remove the camera from power source for an extended period of time to reset.
    view full answer...
    Image 1 for Image 2 for
  • Will Furrion Vision S System Have Solid Reception on Trailer that has Overhang
    Since the Furrion Vision S systems are known to have the best reception of all of the RV observation systems we can confidently say that the # FOS07TASF that you referenced would have great reception with the setup you described. I attached an install video for this for you to check out as well.
    view full answer...
  • Enabling Furrion RV Backup Camera Usage While Traveling
    If you're wanting to have the camera on your # FOS07TASF work while not in reverse you can tie the power for your camera into the running lights and then anytime you want to have it giving you a live feed you just have to turn on your headlights.
    view full answer...


< Previous
123. . .19



Do you have a question about this RV Camera System?


Used Items Available
Used Picture for Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $516.95
Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv camera system for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob H
Video by:
Jacob H
Employee Thomas T
Video by:
Thomas T
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.