bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 4.3 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

Item # FOS43TASF
lowest price pledge
Our Price: $397.84
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 1.78 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Adam Y

Is this right For you? Product Expert Adam Y says:

Yes, if you:

  • Are unsure about wiring stuff yourself and want the quickest, easiest setup, especially if your rig is pre-wired for Furrion
  • Have had enough with yelling back and forth while maneuvering into a parking spot, so you want to hear as well as see what's behind you
  • Are picky about image quality and want the nicest looking screen that also allows you to make adjustments

No, if you:

  • Travel in a big RV and a small screen would just be too hard to see
  • Might want to add more cameras to your system down the line for added security or to create more visibility around your RV while driving
  • Are on the road a lot and need a camera that is better protected against dirt, heavy rain, and snow
Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight. Lowest Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen part number FOS43TASF can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (482)
  • Q & A (0)
  • Photos
  • Why etrailer?

Furrion RV Camera System - FOS43TASF

  • Backup Camera
  • Observation Camera
  • 4.3 Inch Display
  • Furrion
  • Wireless Signal
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • Dashboard Mounting Bracket
  • Suction Cup Mount
  • Below Rear Clearance
  • 120 Degrees

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.


Features:

  • Wireless backup camera improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
  • Camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 4.3" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen lets you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Motion detection triggers monitor to power on
    • Auto off setting lets you set the monitor to power off after 10, 20, or 30 seconds of inactivity
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • Suction cup mount offers a removable mounting option
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware not included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


Specs:

  • Monitor dimensions: 4-3/4" wide x 3-1/8" tall x 1" deep
  • Screen size: 4-5/16"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


Infrared LED Night Vision

LED Night Vision

This camera has 8 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Camera with Built-in Microphone and Monitor with Speaker

Cam-Mic-Monitor Speaker

The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitors speaker, providing peace of mind as you work together to safely maneuver your RV.


Rear Assist Marker Lines

No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.


Motion Detection

Motion Detection

The motion detect feature allows you to set the motion sensitivity level of your camera to low, medium, or high. On the low setting, your camera will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, it will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.


Auto-Off

Auto-Off

The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.



729125 Furrion Vision S Digital Wireless Observation System - Night Vision - Rear Mount - 4.3" Screen - Touchscreen

Replaces FOS48TAPK-BL

FOS48TA-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor - 4.3" Screen

FRC12TA-BL Furrion Digital Wireless Backup Camera w/ Color LCD Monitor - 4.3" Screen

Replaces 729125

Alt 405211ET

Alt 110423

Installation Details FOS43TASF Installation instructions




Customer Reviews

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen - FOS43TASF

Average Customer Rating:  4.7 out of 5 stars   (482 Customer Reviews)

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.

- FOS43TASF
by:

If you own a 22 1/2' trailer and a SUV for towing you will find the range of the signal at its max with communication between camera and receiver. Meaning many times the signal is lost or there is a delay in the image. A vehicle will already be at your driver's side door when it shows up at your bumper on the screen. The view is VERY bubbled. Other than that LOVE LOVE LOVE it! Very helpful when it comes to backing up and hearing the individual assisting with instructions. No yelling needed and no disturbing your neighbors when parking.


Comments
I recommend adding part # WVOSAPANTEXT
Antenna Extension for Voyager Digital Wireless System - Compatible with WVCMS130AP and WVCMS10B
$36.94
to help boost the signal of the camera.
-- Etrailer Expert Jenny N - 01/06/2022


- FOS43TASF
by:

I received the camera system today. Because my trailer was pre-wired for the camera, installation was easy. The camera and monitor are operational but I have not had a chance to try them on the road yet. Hope to do so in 10 days. Will upgrade my review if the system performs as intended. FWIW the service from etrailer has been great.



- FOS43TASF
by:

Camera works as advertised. Wired camera into running lights 5th wheel. Took about 45 min to layout, drill, pull wire, caulk, and mount. I did install 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord on both camera and receiver. Receiver took about 20 min to install. I routed wires nicely, add choke rings. I have 4 bars running 60 mph. Great purchase and very pleased.


Comments
Camera and receivers still working great. Only issue is antenna broke on camera. Purchased aftermarket router antenna 18”. Still have 4 bars.
Randy S - 10/13/2018



- FOS43TASF
by:

This is my second purchase of this item. There was no support from Furrion tech on troubleshooting why the camera was not paring with the monitor. There is no serviceable parts on the equipment. Both camera and monitor had active electric connections but does not work. Not a fan of Furrion !



- FOS43TASF
by:

We purchased the Furrion FOS43TASF to use as an observation camera while towing our new 2018 26' Jayco Jay Flight travel trailer. Our Jayco came equipped with a pre-wired mount for the Furrion camera. The pre-wired black female cord for the camera was present but someone at the factory forgot to wire it to power, so when I plugged in the camera, there was no juice... I removed the center clearance light on the back of the trailer, used the supplied power cord and to feed in/splice in from the clearance light. Installation only took about 15 minutes. We already made our first trip this season and the camera worked wonderful. Great picture, no delays, very happy being able to see what's in the back and coming along the sides. We didn't use the monitor mount supplied with the Furrion, instead we used a vent phone mount I had for my phone that worked perfectly. This is our second and the best observation camera for towing a trailer we've experienced. The first one was another brand on different travel trailer we just sold. Our experience with that camera was poor picture quality, delays and blackouts. We definitely would recommend the Furrion FOS43TASF.



- FOS43TASF
by:

We received our Furrion Observation Camera, FOS43TASF, quickly as advertised. Our camera arrived with no damage. Installation was fast and easy on our 2018, Grand Design, Imagine, 2600RB, plug and play with the existing mount. It took maybe 20 - 30 minutes at the most to install, pair and make minor adjustments. The camera and viewer paired immediately when power was turned on. The camera turned on when the trailer parking lights were turned on. Positioned the camera so the spare tire could be seen on the observation screen to give a point of reference to the back of the camper. Received a strong signal on the pairing. We haven't driven the camper on the road yet to give a review on the workings of the the unit but, don't expect any problems. Should be a good safety feature to know what is behind us when towing. Very happy with our purchase and would recommend this product. This product from etrailer was the least expensive price I could find while researching price points. Thank you etrailer.



- FOS43TASF
by:

This rear observation system was exactly what I needed to give me some eyes in the back of my towable trailer. The system communicates with a 4 bars of strength using a wireless signal between the camera, located at the back of my 24 foot long (2401RG Minnie Winnebago) trailer, and the monitor mounted in the cab of my Ford F150 XLT. The installation was easy and only took about an hour at most. I located the two wires feeding the center clearance light near the top of the trailer and through a new drilled hole just below the light I was able to feed in/splice in, the camera wires to get the power the camera needed. (Tip. Before this I used a pair of 6V batteries in series to get temporary power to the camera to ensure good signal back to the monitor in the truck and that a good rear view was possible from the intended mounting spot). Now I can see from the trailer's back bumper to about 35 feet behind on the road. As usual the Etrailer team was helpful and the order arrived quickly and correctly. Great Job Julie H. for the last minute assist to correct my order.



- FOS43TASF
by:

the camera did not work at first and after 3 different RV dealer visit where they could not or would not fix the problem, I rewired the power supply to the camera. It has worked great since then



- FOS43TASF
by:

Super easy install if your unit is already equipped with the mounting bracket from the factory. The only thing I was not impressed with was the monitor mount. Quite restrictive if your dash is a grained texture you are pretty much restricted to mounting on the windshield which I found a bit annoying. I happened to have a CD slot mount, and we never use the CD player so I tried it. Couldn’t have found a better location!!



- FOS43TASF
by:

I love this camera! It is so much better than I originally thought it would be. I use it for my rearview mirror when traveling, I can see who is behind my Camper and I don't have to use the add on mirrors on my tow vehicle anymore because I can see now with the backup camera in the rear blind spot and the rest with my tow vehicles mirrors. I also can now back my travel trailer into the campsites without my wifes help and do that with only one try. It has been such a nice experience using this camera system.



- FOS43TASF
by:

I purchased this item to make it easier when backing my travel trailer into a spot. It was very easy to install since my trailer was pre wired for a backup camera. While I have yet to use it, since it is no longer camping season in my area, I have tested it out. It has a very clear and sharp picture. I am excited to try it out for real next season.



- FOS43TASF
by:

I needed a way to see my Indian motorcycle on a trailer behind my 40’ fifth wheel. I had Fords system when I bought my new truck, but there was much more wiring than I wanted to tackle and I was hoping for a non wired system. I bought this with my fingers crossed. Very easy installation of less than an hour and the results were what I wanted



- FOS43TASF
by:

This is somewhat pricey but is an excellent camera and has worked well.


Comments
I use it for every camping trip and it is very helpful and working well
Roger - 03/16/2022


- FOS43TASF
by:

I have the camera on the back of a travel trailer. Having a view of the road behind the trailer is indispensible and I am amazed that they are not legally required. I can also see my bikes on the back rack. The only reason I downgrade it one star is because the suction cup for the monitor in the truck often falls off the windshield.


Comments
Good camera. I gave up on the suction cup and prop the monitor up on the console, which is not ideal. It is almost impossible to see with sunglasses on.
Bradb - 02/27/2021


- FOS43TASF
by:

I just installed the new camera and it looks like it’s going to be just what I wanted. Working with e-trailer has been a very pleasant experience. I made a mistake on the original order and they were very happy to take care of the issue.



- FOS43TASF
by:

Just installed this camera and haven't been on a trip yet. But the install and adjustment went very smoothly. I am very impressed that this camera also has Night Vision, on the occasion I might arrive late to my campsite or home. Next trip on 11/19/21 for Thanksgiving with my late husband's family. Excited and blessed!



- FOS43TASF
by:

I like it a lot I double a travel trailer and a atv trailer it helps me keep a eye on the trailer behind the camper and is great for changing lanes. The only thing I would do different is get the bigger monitor. Thanks



- FOS43TASF
by:

way to small of a screen to see any thing and the picture quality is not that good. i bought another one and it way 149.00 and 8 inches and great quality picture.



- FOS43TASF
by:

works great, it was plug and play my new fifth wheel RV came prewired for this camera system. worked very well for back up camp site and backing the RV into the parking spot at home, also helps keep an eye on those tailgaters while going down the highway



- FOS43TASF
by:

The RV backup camera system works great! We pull our boat behind our camper. We can watch our boat constantly to make sure no troubles. Plus the camera is a great help when backing the camper up visually. A great product.



- FOS43TASF
by:

So far so good . Install was a piece of cake , trailer was pre wired .



- FOS43TASF
by:

I was disappointed to learn that the camera will only turn on when my truck's headlights are on (thought I could use it for monitoring while camping), but that's probably a limitation of my camper. Otherwise, it's been great and the camera definitely helps when backing up or driving down the road.



- FOS43TASF
by:

Great Product... Easy setup and GREAT technical support when needed.



- FOS43TASF
by:

I bought one for my trailer and installed it. I like it so much that I bought one for my friend. Both trailers were pre-wired for the install, which mad it super easy.



- FOS43TASF
by:

My 2019 Keystone cougar was pre-wired for his camera. It made installing it very simple. I’ve used it for a year now and for the most part it has worked to my expectations. The only problem I am having is it cuts in and out briefly as I’m driving down the road. This does not cause any real problems and I’m not sure what is causing it. It’s either that distance is too far or had a loose connection I haven’t tracked it down yet. But I would recommend buying the system.


Comments
Thank you for your review. It does sound like the connection may be loose. I recommend to remove the camera from the shark fin mount and make sure the wire connections are fully seated with one another.
-- Etrailer Expert Heather A - 06/02/2021

30
496
Show More Reviews

Ask the Experts about this Furrion RV Camera System



  • What Furrion Backup Camera Works for Grand Design Momentum 328m Pre Wire Kit
    The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS43TASF is the recommendation we most often make. The pre wired set ups are designed to accept this camera without making any modifications.
    view full answer...
  • Troubleshooting Furrion Backup Camera and Monitor Not Pairing
    The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF should pair especially when close to one another but not connected by cable. You may want to check your power to make sure the correct voltage is reaching the camera and monitor. If it still doesn't pair power down both units for a few minutes separating them beyond pairing distance power them back on and then move them close enough for pairing again. Pairing wireless units just...
    view full answer...
  • What Trailer Wiring Circuit Powers Furrion Camera of 2019 Keystone Cougar 30RLS
    The circuit that normally powers the camera of the Furrion Vision S system part # FOS43TASF is the running light circuit of the trailer wiring. If your running lights on the trailer are working properly but there's no power to the camera you'd want to check to make sure the wiring of the camera is ran back to the circuit properly. Or you can run a new wire as needed.
    view full answer...
  • How To Adjust the Angle Of the Furrion Vision S Wireless RV Backup Camera System
    The Furrion Vision S Wireless RV Backup Camera System part FOC48TA-B which was replaced by Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF does allow you to make adjustments to the camera housing. The camera housing can be tilted up or down inside the bracket to give you a different viewing angle. I will say however that it does take a bit of force to tilt the camera up or down but this can be done so don't be afraid to use a bit more force. I am not exactly sure I...
    view full answer...
  • Can the Furrion Vision S Camera System Be Installed On an Aluminium Skin Trailer
    The Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF will work just fine on an aluminium skin trailer but you will need to mount it at the top like you are doing so there is no signal interference issues. In regards to the angled top, the camera housing can be tilted up or down so you won't have any issues here either as you can then tilt the camera upward to compensate for this downward angle. I have attached a video which shows the adjustment process for you as well.
    view full answer...
    Image 1 for
  • How To Fix Reversed View On the Furrion Vision S Wireless RV Backup Camera System
    It sounds like you just need to flip the camera view on the monitor for the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF. If you take a look at page 16 of the owner's manual which is attached for you below you will be able to see this process but I have also attached a cutout of this for you as well.
    view full answer...
    Image 1 for
  • Back Up Camera Recommendation for Jayco White Hawk 27RB
    The newer Jayco campers like your White Hawk 27rb are pre-wire for a backup camera which means they have a wire and mount typically ran to the top of the trailer that's designed for a Furrion system like the part # FOS43TASF to attach to. This camera has great reception and our customers really like it so I recommend it for your trailer.
    view full answer...
    Image 1 for
  • Backup Camera Recommendation for 2019 Montana MO3855BR that is Prewired
    The Furrion RV Observation Camera System # FOS43TASF that you referenced is the camera system your 2019 Montana MO3855BR was pre-wired for. I attached a picture of the camera installed on a similar RV as yours that was prewired for it as well.
    view full answer...
    Image 1 for
  • Recommended Backup Camera System for Pre-Wired 2018 Keystone Passport Ultra-Lite
    Your 2018 Keystone Passport Ultra-Lite Trailer is pre-wired for a Furrion Camera System like the excellent # FOS43TASF. This particular system is designed specifically to be used with pre-wired brackets like what you have and features a clear 4-5/16 inch full-color LCD monitor for easy viewing. Its waterproof camera also has built-in infrared LEDs to provide nighttime vision and the digital transmitter eliminates the potential for signal interference from other devices.
    view full answer...
  • How to Pair Furrion Wireless RV Camera to Monitor
    Try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.
    view full answer...
    Image 1 for
  • Recommended Camera for Pre-Wired 2019 Forest River Palomino Solaire 147X Hybrid
    Your 2019 Forest River Palomino Solaire 147X Hybrid is indeed pre-wired for a Furrion camera system such as the excellent Furrion RV Observation Camera # FOS43TASF. This particular unit is actually designed specifically for use in pre-wired brackets like what you have and its 4-5/16 inch full-color LCD monitor will give you a great view of everything behind you. It also features a waterproof camera that can be adjusted for different angles, motion detection sensors to alert you of obstacles...
    view full answer...
  • Backup Camera Recommendation for 2017 Keystone Cougar 333MKS Pre Wired for Camera
    Yes, the Furrion RV Observation Camera System w/ Monitor and Bracket # FOS43TASF was specifically designed to fit the pre wired connection you have at the rear of your 2017 Keystone Cougar 333MKS. The rep from Furrion was here today actually talking about how every pre wired camper like yours was intended for their camera system so this will install very easily and work great.
    view full answer...
    Image 1 for
  • What Does Blue Light on Furrion Camera Indicate
    If the blue light is active on the camera that would indicate that it's receiving power and is "on". Most likely the camera is wired to the trailer's 12 volt battery as a power source instead of to the running lights or reverse light circuit like some do. Does the monitor display what the camera sees at all times then when it is powered on as well?
    view full answer...
  • Would 2012 Forest River Crusader have Came Pre-Wired for Backup Camera
    The camera pre-wiring that Forest River offers didn't start till only a few years ago. A 2012 model would not have came pre-wired, but the Furrion kit part # FOS43TASF comes with the needed bracket so it would still work on your Crusader. You'd just need to mount the bracket and then run the wires and you'd be set.
    view full answer...
  • Will Cold Weather Affect Furrion RV Observation Camera System # FOS43TASF
    I spoke with my contact at Furrion regarding the RV Observation Camera System # FOS43TASF and he said that cold weather should not have any effect at all on the system. He said even at below zero temperatures the system will run like normal and it can be left attached during the winter if desired. I have attached a short video review on this system that you can check out as well.
    view full answer...
  • How to Wire Up Furrion Back Up Camera on RV That Won't Drain the Battery
    The power wire of the camera shouldn't be ran directly to the trailer battery as it will drain it over time as it will stay on. You need to instead run the power wire to either the running light circuit (my pick) or the reverse light circuit so that it only turns on when you want it to. Those circuits get power from the tow vehicle too instead of from the trailer battery so when wired up like that you'd never have to worry about draining the battery.
    view full answer...
  • How to Install a Furrion Camera System on a Forest River RV Rockwood Geo Pro
    If your 2019 Forest River RV Rockwood Geo Pro is prewired for a Furrion RV Observation Camera System part # FOS43TASF then there should be a mounting bracket at the top of the trailer in which the camera would just plug into. If this is not the case then unfortunately you would need to test the tail light wires with a circuit tester as the manufacturer does not provides us with this information. The majority of factory installed systems will splice into the running light wire (usually brown)...
    view full answer...
  • Which Backup Camera is a 2019 Grand Design Momentum 350G Prewired For
    Yes, the 2019 Grand Design Momentum 350G is prewired from the factory to be used with the Furrion RV Observation Camera System part # FOS43TASF. All you will need to do is plug the camera into the preinstalled bracket, sync the camera/monitor together, and then you are good to go. It is super easy and requires no splicing whatsoever.
    view full answer...
  • Rear Observation Camera for Pre-Wired 2019 Jayco White Hawk
    I reached out to my contact at Jayco regarding your 2019 White Hawk and she said that it actually depends on the specific submodel and any options that may have been added at the factory as to whether the pre-wired setup is connected to a constant power source for observation or the reverse signal for a backup camera. If you are able to give me your VIN I will be happy to reach out to her again and she should be able to provide me with the specific setup on your RV with that number. Otherwise...
    view full answer...
  • How to Pair Furrion Vision S Camera System Monitor to Camera
    Try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.
    view full answer...
    Image 1 for
  • How Is The Backup/Observation Camera Wired on a 2018 Grand Design Solitude
    Generally speaking, the pre-mounted camera bracket for the Furrion RV Observation Camera System part # FOS43TASF is wired as an observation system which means the camera will turn on when the vehicle's running lights are turned on. However, it could also be wired to turn on when the vehicle is placed into reverse. It all depends on how the trailer was wired from the manufacturer. If I had to take a guess for your 2018 Grand Design Solitude I would say the camera is wired as an observation...
    view full answer...
  • Troubleshooting RV Backup Camera that Isn't Paired
    If it's a Furrion camera try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.
    view full answer...
    Image 1 for
  • Will Aluminum Trailer Skin Cause Issues with Furrion Backup Camera System
    Some RV backup cameras don't have the greatest reception and an aluminum skinned trailer would cause an interference issue. The Furrion setups though like the # FOS43TASF have great reception and aluminum skinned trailers would not be an issue at all. The reception range of this setup is up to 492 feet.
    view full answer...
  • Can I Use the Furrion RV Observation Camera System on a 2015 Coachmen Chaparral
    Yes, you can absolutely still use the Furrion RV Observation Camera System part # FOS43TASF on your 2015 Coachmen Chaparral even though it is not pre-wired for it. The process to do so is extremely easy. The first thing you will need to do is find a suitable place to install the camera mounting bracket which installs using four screws. Then once this is completed you will drill another hole into the exterior of the trailer directly behind the camera mounting bracket so you can route the...
    view full answer...


< Previous
123. . .36



Do you have a question about this RV Camera System?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv camera system for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Installed by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Thomas T
Video by:
Thomas T
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Adam Y
Updated by:
Adam Y
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.