bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 7 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras - 7" Screen

Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras - 7" Screen

Item # FR98NR
Our Price: $887.51
You Save: $124.25
RV Camera System
Shipping Weight: 4 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Waterproof cameras let you keep an eye on your blind spots whether you're changing lanes on a busy highway or backing up into a tight campsite space. Motion sensors automatically power the monitor to alert you of prowling animals or trespassers. Great Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras - 7" Screen part number FR98NR can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (696)
  • Q & A (0)
  • Photos

Furrion RV Camera System - FR98NR

  • Backup Camera
  • Observation Camera
  • 7 Inch Display
  • Furrion
  • Wireless Signal
  • Anti-Glare
  • Built-In Microphone
  • Mirrored Image
  • Motion Detecting
  • Night Vision
  • Touch Screen
  • Waterproof
  • 3 Cameras
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees

Waterproof cameras let you keep an eye on your blind spots whether you're changing lanes on a busy highway or backing up into a tight campsite space. Motion sensors automatically power the monitor to alert you of prowling animals or trespassers.


  • Wireless backup camera system improves side-view and rear-view visibility for your RV or camper
    • Minimizes blind spots on both sides and the rear to help prevent accidents
    • Supports up to 4 wireless cameras (additional wireless camera sold separately)
  • DOT-approved, CMOS marker light cameras creates clear digital video in full color
    • 2 Side amber light cameras have a 65-degree viewing angle
    • 1 Rear red light camera has a 120-degree viewing angle
    • Motion sensors trigger the monitor to turn on
    • Detachable light covers make it easy to replace LED bulbs
  • IR cut filter blocks out infrared light during the day to capture natural-looking images
    • 12 LEDs on side cameras housing provides 39' of nighttime visibility
    • 8 LEDs surrounding rear cameras lens provides 16' of nighttime visibility
  • 7" Full-color LCD touch screen monitor has a quad screen that displays 4 camera angles simultaneously
    • Auto-dimming, anti-glare screen is easy to see in any lighting condition
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Color-coded, rear assist marker lines show distance from other objects
    • Auto-off setting powers down the monitor after 10, 20, or 30 seconds
  • Integrated microphone and speaker make it easy to get help backing up
    • Microphone on rear camera picks up your friend's voice outside the RV
    • Speakers on monitor let you clearly hear your friend's instructions
  • Built-in digital transmitter offers high-quality, uninterrupted video up to 492' away
    • Eliminates interference from smartphones, routers, and other devices
  • Durable metal housing is waterproof and dust resistant
    • IP65-rated to protect against dust and low-pressure water jet sprays
  • Simple installation - minimal drilling required
    • Monitor suction cups to your windshield or sits on your dashboard
    • Cameras replace your side and rear middle clearance lights
  • 3 Cameras, monitor, 2 monitor mounts, 12V DC power cord, and mounting screws are included


  • Side camera overall dimensions: 5-1/2" wide x 3-1/4" tall x 1-5/8" deep
  • Mounting hole spacing (center to center):
    • Vertically (left side): 1-1/8"
    • Vertically (right side): 5/8"
    • Diagonally: 3-1/8"
  • Resolution: 720 x 480
  • Voltage: 12V - 24V DC
  • Wire length: 7-1/2"
  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing (center to center):
      • Horizontally: 3-3/4"
      • Vertically: 15/16"
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty

Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.

When you've hit some heavy traffic on the way to the campsite, the last thing you want to worry about is getting into a wreck. This wireless backup camera system with side marker light cameras helps minimize blind spots when someone is speeding past you on a busy road. The third brake light camera on the rear will also give you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.

View Multiple Cameras at Once

Stressed about not knowing what is happening around your large Class A motorhome? Whether you're on the road or parked at the campground, this camera system includes marker light cameras so you can monitor everything going on around your RV. And these DOT-approved lights have detachable covers so it's easy to swap out the LED bulbs later on in the future.

Furrion RV Side Marker Light Cameras

The 2 amber marker lights have a 65-degree viewing angle so you can keep an eye out on the sides of your RV, whereas the red marker light has a 120-degree viewing angle to help you navigate while backing up. The rear camera can also serve as your third brake light.

Depending on your camera setup, this system allows you to add 1 additional camera (FCN48TASF - sold separately) for a total of 4 cameras. You can view all camera angles simultaneously with the touch screen as you're driving down the highway.

Or if you're set up at a campsite for the weekend, the motion sensors on the cameras will automatically power the monitor on if they sense movement in the form of a prowling animal or person.

Easily Communicate from Outside Your RV

Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the rear camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.

Avoid Collisions While Backing Up

No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.

Furrion RV Side Marker Light Cameras at Night

The rear camera has 8 infrared LEDs and the side cameras have 12 infrared LEDs, so you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' for the rear camera and 39' for the side cameras should you arrive at the campsite after dark. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.

Withstand Multiple Climates and Environments

If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.

Installs Onto Multiple Points In and Around Your RV

Furrion RV Backup Camera Monitor Mounts

This camera system includes 2 different mounting options for the monitor, depending on how you want to display it. You can either use the suction cup to stick it onto your dashboard or windshield. Or you can attach the tabletop mount so the monitor sits on your dashboard, and the 4 non-slip pads will help prevent it from shifting around. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.

Furrion RV Rear Marker Light Camera Installation

Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. The side and rear marker lights will typically replace your existing clearance lights and bolt down with the included mounting screws. You are, however, able to install the cameras in other areas on your RV. Just be sure that the cameras won't interfere with any slide outs or other moving components.

Furrion RV Side Marker Light Camera Installation

With both the side and rear cameras included, this system can be used for both observation and for backing up. Just wire the side marker cameras to the running lights and the rear camera to the reverse lights. A trigger wire is also included to wire the side cameras to your turn signals. So whenever you need to make a right-hand turn and activate the blinker, that camera view will immediately pop up on the monitor.

2021123890 Furrion Vision S Wireless RV Backup Camera System and Blind Spot Detection System with 3 LED Marker Light Cameras - Night Vision - 7" Screen

Replaces FOS07TAEM

Customer Satisfaction Score:

Customer Reviews

Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras - 7" Screen - FR98NR

Average Customer Rating:  4.7 out of 5 stars   (696 Customer Reviews)

Waterproof cameras let you keep an eye on your blind spots whether you're changing lanes on a busy highway or backing up into a tight campsite space. Motion sensors automatically power the monitor to alert you of prowling animals or trespassers.


Have not tested this on the road, so this covers installation.
Instructions are clear and easy to follow, I was not clear about what to do with the trigger wire when you are retro fitting to an older RV, the FAQ on etrailer had the info, thanks for that.
Installed this on a 2000 Lance camper sitting on a 1978 Ford F250
The side cameras were very easy to install, the backup camera required a little bit on modification to the camper.
I did not like the monitor install options so did some simple modifications to the stand so I could use ram-mounts.

Final setup is amazing


Pretty good. Easy to install. Directions could be better, however. One major annoyance is neither of the two mounting stations do a good job of holding the display.


As I have yet to install the camera set this review is geared more towards etrailer. First great site where products are easy to find. Super customer service. High tech folks who actually help. Videos for product information and installation. And a host of folks that research so you don't have too. Great prices and fast shipping. Only downfall no accounts to save later purchases in. OH Well! I guess I will have to suffer. :)


I have a 2020 Grand Design momentum toy hauler.. The side cameras hoioke up very easily.. The rear I had to remove the security camera mount and drill new holes to mount rear camera and light.. Not terrible.. The screen has room for a 4th sec camera and not sure why it wouldnt be included in this kit.. Havent used it other than hook up but nice to see behing you..


Huge thank you to eTrailer support team and Katrina specifically for reading through reviews and striving to improve the situation!
I am used to running into problems and then on my own problems waiting till warranty periods run out, and I just wanted to say "may have had a weather seal failure" but Katrina came to the rescue and managed a special 1 Time Only exchange for a replacement unit.
Still need to get it installed, but the video I remember before the seal failure was fantastic! So I am going to install as soon as the weather warms up a bit and not delay like the other 3 cameras I am now more likely to get to later this summer =o)


Wow makes driving and backing a lot safer. I love the extra protection to see what is happening outside while we’re camping.









After one year of use with the Furrion Camera I am completely convinced it is the best add on we have put on our camper. It is really useful driving down the road. Also, good for seeing how close you are to an object when backing in.


Installed on GD Imagine '22 2600RB and '15 Chevy 1500 Silverado double cab LTZ. Took about 15 min to install with pre-wired prep kit on RV. Got 5" monitor to keep from being too big on dash/windshield. Monitor is on windshield with suction mount right below rear view mirror and works great even with antenna folded down, very easy to pop off and put in console when not in use. You can also just rest monitor in the console next to power plugs, etc. Did not get the side cameras due to other reviews that they aren't really necessary, definitely agree not needed. The rear view however is a must-have if backing anywhere without a spotter. I can back out of my neighborhood driveway with somewhat limited sight and see everything in both directions Based on many internet reviews of other camera systems, glad I went with this: it was super easy to install and provides the basic purpose of backing up safely. I have no need to record or watch it continuously while driving, although it seems to work just fine while driving and not cut in/out as other reviewers have described after a couple hour round trip. Maybe higher definition systems out there with better features, but this unit has great quality and vision is very acceptable for the purpose it was designed, to assist in backing up. Simple, easy install, great value, just works!


The installation was fairly easy. The trailer came prepped for the rear camera so, it was attached and linked. The side cameras involved a little work due to being close to the pass-through doors. They went on with a bit of cutting of the trailer skin.

The problem is the right side trailer camera is reading that it's the left side and visa versa for the right. They are both installed correctly, facing back and the pairing button on the bottom.

Also when the two side cameras paired they caused the rear camera to unpair. I re-paired the rear and now the right side ( left camera ) is unpaired.

I've emailed Furrion for answers to my situation.


Have not been out on the road yet but the install was easy even for a novice like me. My reflection 5th wheel was prewired so it was a plug and play for the rear camera. For the side cameras I used the two screws from the previous light. I put both screws in the top holes, (one behind the camera) as that seemed to secure it better then bothe screws not behind the camera. Instructions were a bit limited(or I didn't read them) on the side camera sync but I pressed enough buttons to figure it out. Picture looks great. Do watch for obstructions such as awning supports which will limit view. I also used silicone to keep the water out.


Very easy to install. Works like a charm. I thought it would be weird seeing behind me with the monitor but the monitor is on the dash and imitates a rear view mirror. I love it.
ETrailer comes through again!


Easy to install, But the trailer was prewired for the camera. The setup was also pretty easy but you needed to be hooked to the trailer with your lights on. The directions were a little vague on that but otherwise not a bad unit.


Seem to be a great system so far but will take a long trip soon for a better evaluation. Installation was as easy as it gets because my travel trailer was prewired for a Furrion camera system. My only complaint so far is with the factory instructions being a little light on the pairing operation. I was getting extremely frustrated when my camera would not pair with the screen. I had power to the trailer but the blue light would not stay on for pairing. I finally started reviewing YouTube videos and trailer videos. I am not sure where I found it but the final solution was simple. So, 1) ensure the 7-way connector is connected to the tow vehicle, 2) ensure you haven't disconnected the trailer battery, 3) ensure your camera screen is plugged in, 4) actually start the tow vehicle and finally 5) turn on your parking lights. Why the parking lights have to be on I will never know because it is NEVER mentioned in the manual. If I turned them off, the camera lost pairing. Yes, parking lights are safer on the road but failing to pair if they are off just seems silly to me. Color screen has good clarity and remote microphone works pretty good.Depending on your priorities, you will have to adjust the camera angle to your liking but it's easy.


This is not an eTrailer issue, this is a Furrion issue, it works, but it has a very weak connection on my 42’ trailer and loses connection repeatedly.
May make a difference if I had the side marker cameras, time will tell. I have to get them first.
But, something is better than nothing when backing.


The unit is adequate for the price, and it displays a clear view of everything behind our RV. NOTE: The unit will only work when the truck lights are on. Automatic truck light settings will not allow the camera to display. Overall, a great buy.


Overall it's good and I would recommend. The screen isn't the easiest to see, and the image freezes on occasion. Fairly easy to install. Does not fit my 2022 Keystone Fusion Impact 359 5th Wheel Toy Hauler. I need to remove the antennae to open and close the awning.


Order was left in front flower bed by USPS. Not so great for them. It took longer to check the items in the box than it did to install the camera. Longest was getting the ladder set up so a 75 year old person could safely reach the bracket on my Windjammer 3029W. Attached truck to the trailer for marker lights and camera scene came up immediately so apparently paired already.

Thanks again for prompt service and providing a great product.


Drop-in install with prewired RV. Note- you need your running lights on to power the camera at least in our case. Great picture and excellent follow-up from trailer!

Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Can Furrion Vision S System be Used on Toy Hauler
    I am not really sure why there would be a note stating that the Furrion Vision S systems like the part # FR98NR wouldn't work well on a toy hauler but it definitely would. This kit has the best reception of all of the kits out there and is overall very reliable so I would feel very confident recommending it for you.
    view full answer...
  • Can Furrion Side Marker Cameras be Mounted Vertically
    There is not a vertical-mount option for the side cameras of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR. The reason for that is the camera can't be rotated, and while the monitor allows you to rotate the image, it rotates it 180 degrees instead of 90 degrees. So you would have to drill new holes to mount the # FR98NR.
    view full answer...
  • Will The Furrion Vision S System Show The Side Observation Cameras When Using The Blinker
    Great question, I did some research into the Furrion Vision S. **Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR. You need not worry about getting any kind of upgrade or anything new to get this feature, it comes standard. Just follow the install instructions to complete the set up.
    view full answer...
  • Troubleshooting 7 inch Furrion Vision S Monitor Replacement that Has Worse Reception
    The Vision S 7 inch monitor has the same reception as the 5 inch monitors so that is an odd problem to have. I would make sure all of the antennas are pointed up if you can on the cameras as that is what typically causes this problem.
    view full answer...
  • Is It Possible To Pair A Furrion Camera With The Factory Monitor In A 2020 GMC Sierra 3500
    That technology, to my knowledge does not exist. The cameras, like the ones in the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR, are designed to work only with the monitor included.
    view full answer...
  • Can The Furrion Vision S RV Cameras Be Mounted Anywhere?
    You can mount the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR anywhere you'd like, so if you wanted to mount it lower or higher on your 2020 Keystone Passport you absolutely can. In the installation video attached, you can see at 13:07 our tech chooses a location to mount this camera since the shown motorhome didn't have a side marker light. I would just recommend that you do not mount the camera anywhere that'd interfere with any moving...
    view full answer...
    Image 1 for
  • Can Furrion Vision S Wireless RV Observation Camera System Side Cameras Orientate Vertically
    The side cameras of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR are not able to be orientated vertically as they are not able be removed and repositioned.
    view full answer...
  • Is The Furrion Vision S RV Camera System # FR98NR The Same As The FOS07TAED
    Yes, the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR and FOS07TAED are the same thing, we just use a different item number on our site than Furrion.
    view full answer...
  • Could Furrion Vision S Install on 2015 Forest River Signature Ultra Light
    Yes the Furrion Vision S Observation system part # FR98NR would work great on your 2015 Forest River Signature Ultra Light fifth wheel camper. This kit can basically install on any camper and would do so very easily due to it's universal design. For more info on this kit check out the review video I attached.
    view full answer...
  • Recommended Furrion Camera and Monitor for a Prewired Jayco Travel Trailer
    I have a monitor and camera set up that will work with your Jayco's Furrion wiring but none of Furrion's equipment works with other manufactures or your factory display. There are also no adapters to connect to your Silverado's display for any other camera. If you are looking for a multi camera set up you will want the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras item # FR98NR. This system has the same monitor and main camera but also includes 3...
    view full answer...
  • Recommended Backup Camera System for a 2022 Chevrolet Silverado 2500
    The Custom Third Brake Light Camera for 7" Factory Monitor # 3460011 you mention will not fit a 2022 Chevrolet Silverado 2500, this product is designed to work with the 2015-2019 Chevrolet Silverado 2500. Currently there are no backup cameras that are compatible with your OEM screen in your 2022 Chevrolet Silverado 2500. Instead, you'd need to install a different system with its own included screen, like the Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras...
    view full answer...
  • Can I Mount Two Furrion Cameras on the Back of my RV?
    When using the Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen part # FR98NR you do have adjust ability in both the red marker light camera and the shark fin camera. I was able to confirm this with Furrion. The red marker light camera would best used as the camera that looks down towards the bumper and the shark fin camera would be mounted on the roof at the rear edge and would act as you rear viewing camera. The system has really good field...
    view full answer...
  • Will Furrion Vision S Camera System FR94FR Fit 2019 Grand Design Solitude 2930RL?
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen # FR98NR will work with your 2019 Grand Design Solitude 2930RL and will replace your current marker lights. You will just need to wire the cameras in the # FR98NR to the running light circuit of your camper, and will give you an excellent view of what is going on around you when you are on the road and the 7" monitor is great for being able to see each camera view clearly. I included a video...
    view full answer...
  • Does Furrion Vision S Monitor Work with FCD48TASF Camera
    The Replacement 4.3" Monitor # FR47FR is not compatible with the older Furrion camera that you have. The manufacturer quit producing that monitor and none are available. Only option would be to upgrade your entire Furrion camera system like with the part # FR98NR.
    view full answer...
  • Will Bluetooth Connection In Truck Interfere With Furrion Vision S Wireless RV Observation System
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras part # FR98NR is not affected by blue tooth because they have a wireless connection between the camera transmitter and the monitor receiver but they do not utilize Bluetooth at all. They basically have their own wireless connection and use their own separate monitor so the camera is not compatible with any existing screens in the vehicle unless they are Furrion. They also do not require WiFi connection to work.
    view full answer...
  • Will Furrion Vision S Wireless RV Observation Camera System Fit 2016 DRV FullHouse LX455
    Yes, the Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras # FR98NR that you referenced will work great on your 2016 DRV FullHouse LX455 that currently has side marker lights that are round. This would replace them easily and would give you the side cameras that would be very helpful for a fifth wheel trailer that's as long as yours.
    view full answer...
  • Furrion Vision S 3rd Brake Light or Clearance Light Camera
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen # FR98NR has the red light with camera that serves as both a marker light and 3rd brake light for your RV. You don't need to use it as a brake light, but you do need the clearance light function because that is what gives the camera the power it needs.
    view full answer...
  • Wireless Camera System Recommendation with 7" Monitor and at Least 2 Cameras
    For your application I recommend picking up the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR since it comes with 3 cameras and an auto-dimming feature. Screen brightness is something that has to be adjusted through menus for all of our wireless systems but since this can also adjust on it's own depending on the light it's exposed to, the monitor will be easier to handle than some off the other systems. The only time I don't recommend going...
    view full answer...
  • Adapter Needed For Operating Wireless Trailer Camera Connected To a 2021 GMC Sierra 2500HD
    It sounds like you have a camera system like the Furrion # FR98NR with the side view cameras. For this you will need a 7-Way Vehicle Power Adapter # FR87PR. This adapter works with the PWM wiring from your 2021 GMC Sierra 2500HD to give the cameras the constant 12 volt power they need.
    view full answer...
  • Where Should the Rear Camera Be Placed On a Trailer At the Top
    The best location to install a camera on the back of the trailer is in place of the center marker light at the top. That said, removing the center light completely can be a violation of local state law. The best option we have with this in mind is the Furrion Vision S Wireless RV Observation Camera System part # FR98NR as the center camera is integrated in a mounting bracket which also houses the marker light. Furthermore, there are two traffic cameras which help reduce blind spots when...
    view full answer...
  • Can Furrion Vision S Rear Camera with LED Light Be Replaced
    Furrion discontinued that rear camera with the red marker light so the only ones still available are in the complete Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras # FR98NR. If you still have your original rear marker light then a more cost-effective solution would be to re-install your rear marker light and install the standard Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF above or below the light instead.
    view full answer...
  • How to See Backup and Side Cameras with Furrion Vision S Camera System
    The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FR98NR will need to be in the tri-view mode to see the backup and side cameras while towing. My contact at Furrion confirmed that and confirmed none of the cameras should be activating when you press the brake pedal unless they don't have power and the brake light circuit is sending power to them. You'll need to use the tri-view mode to see all 3 cameras and then when you want bigger/better visuals...
    view full answer...
  • Location Options For 4TH Furrion Camera On Vision S Monitoring System
    Yes, the Furrion Vision S Wireless RV Backup Camera # FCN48TASF can be powered by a 12 volt adapter to allow you to use it in your truck bed for connecting your 5th wheel hitch. Another popular use is installing the camera outside the camper entry door and powering it off of the porch light. This would allow you to use the monitor in the trailer and be able to see who is at your door before you open it.
    view full answer...
  • Troubleshooting No Power to Rear Wireless Camera on Travel Trailer
    It looks like the LeeKooLuu camera system is similar to the Furrion Vision S System like part # FR98NR. Normally the power wire for the rear camera is tied to the running light circuit on the trailer so you might try turning the headlights on for your towing vehicle to see if that powers up the camera. If that doesn't work then you'll need to test the wires or pins you connected your camera to and change anything to match per function. Attached is an installation video of the Furrion Vision...
    view full answer...

Do you have a question about this RV Camera System?

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Adam E
Video by:
Adam E
Employee Thomas T
Video by:
Thomas T
Employee David F
Test Fit:
David F
Employee Kevin C
Test Fit:
Kevin C
Employee Adam Y
Written by:
Adam Y

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924