Save Up To 60% on HOT Independence Day Deals!
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.
Features:
Specs:
Note: Do not run your generator while it's sitting on this tray.
Need a way to easily top off your generator with gas during your next off-the-grid camping trip? This tray slides out of your RV for quick access to your generator so you don't have to crawl into your cluttered or cramped cargo compartment. When you need to add gas, pull the knob up and slide the tray all the way out. When you're finished, push the tray all the way back in until it's stowed away. The safety latch locks the tray in place, so it won't slide out while you're traveling to the next campsite. And to make sure your generator doesn't get banged up while you're traveling down the road, tighten the 2 included adjustable straps over it and secure them to the integrated slots on the tray.
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this MORryde sliding generator tray. This is going to mount in your RV storage compartment. It's going to make it much easier for you to gain access to your generator, rather than having to lean in, rustle with your generator inside your storage compartment. This will extend out like so. Extends out about 21 inches so it's gonna be much easier.
Pull that out, and then you can work with your generator whether you're needing to add gas, switch out your generator for a new one, whatever the case may be. Having it out here where it's easier to access is gonna make it much easier for you. This does have a weight capacity of 250 pounds. So it's gonna do a good job of holding most of your generators out there with a full tank of gas. It should be plenty for you.
It does have this knob here that is gonna lock it in place so you don't have to worry about the tray moving around while you're going down the road. Then as soon as you're ready to pull it out, you just lift up on that knob and it will allow it to slide forward. And then when you're done it just locks in place like so. As you can see, it's a nice smooth glide there. So, very easy.
It's got a ball bearings inside so it's gonna be a nice, smooth ride for you. It's not gonna be jerky. You're not gonna have to strain to pull that generator out even with 250 pounds in there. Now as far as our measurements go, now this is going to have an overall width of 16 1/2 inches. If you're just measuring the metal plates on the side here, so from one to the other 16 1/4 of an inch.
If we're taking into consideration this hardware that's sticking out, it's 1/4 of an inch on each side. So that'll make it about 16 3/4 of an inch total width. Our links, if we count our knob, the ball on our knob all the way back, it's 22 3/4 of an inch long. So it's gonna be great for your RV compartments that are at least 22 3/4 deep. And then our overall height. Again, if we're measuring to the top of our handle here, it's 5 1/4, or sorry 5 1/8 of an inch tall. So just over five inches tall. So it should fit in pretty easily no matter what height your compartment is just make sure that you have enough room for the generator once it's put in place. As far as our internal dimensions go, we're looking at 14 inches wide. Again, we do have these rivets that are sticking out here. So actual usable width is probably about 13 1/2 inches. Our depth is about 21 inches. There are a few rivets at the very front here. So that's gonna take up about 1/4 of an inch of that usable space. So we're looking at about 20 3/4 of an inch in length. And then our height is only about 2 3/4 of an inch. So it's not going to be too tall for you. It's not gonna give you a whole lot of side to side support but they do include these strapping brackets. Do have the buckle snaps on them and you can adjust these to the height that you need. And you can see those do fit into the sides here. There's these slots where these will clip in so that you can tighten these down onto your generator. Make sure it's gonna be nice and snug. It's not gonna be moving around once it's in here. So even if you're going over bumpy roads and that sort of thing, it will still do a good job for you. Now they don't include any hardware to get this mounted but you can see there are square holes on here so that you can use your typical wood screws or other sort of mounting hardware to get this mounted in place. You will definitely want to mount it firmly so that you're not gonna have to worry about that weight shifting forward as you pull your generator out. But otherwise this does come preassembled. It is made here in the USA. So you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. And because it's comes preassembled just like this, all you're really gonna have to do is put a few screws in there to hold it in place and then you'll be ready to put your generator in and strap it down. So, very easy to get installed and be ready to use to pull that generator out toward you. So that's gonna complete our look for today. I hope this video has been helpful in determining if this is the right tray for you. We do have other sliding trays here at etrailer.com. So if you need a different size or something like that, check out some of those other options. Otherwise, we'll see you next time. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (35 Customer Reviews)
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.Generator tray arrived sooner than expected. Was packed extremely well without any damage. Have not installed the tray yet but looking at it appears to be a solid and well built assembly.
Fast delivery. Could do a better job on taping up the box. It arrived almost open. The shelf itself is very solid and well made. I am using it for a different purpose than a generator. But it will be perfect for what I need.
Review from a similar Generator Tray in RV Cargo Slides
Thanks for keeping my informed as to my order status. I received the MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" in perfect condition. The weight of the item is 52 lbs. and is well built. It will be perfect for my Portable Onan 4500i Generator, which ways about 100 lbs. I haven't installed the tray yet, but it will work out perfect in the rear storage compartment on my 5th Wheel Trailer.
Review from a similar Generator Tray in RV Cargo Slides
I must admit that I was PO'd when the tray arrived as the box had a different part number and different dimensions listed on it as opposed to those on etrailer's site. The issue was solved by Montrel M at etrailer via phone even though I had previously sent 3 emails. Within an hour all was settled. My apologies. As for the tray it looks great and is made well. I'm sure it will work fine. Now, can etrailer put the Mfg part number under their own part number for clarification if necessary.
Greg - 05/04/2022 Greg - 06/26/2022Review from a similar Generator Tray in RV Cargo Slides
They tray works well for my application. I got lucky on the size, if it was any bigger than 15-3/4” deep it wouldn’t have fit the compartment.
I had to mount it on wooden blocks so the slides would clear the front lip of the box. Great deal for the money compared to fabricating a sliding tray from scratch. It has no latch to lock the slide in the out position however so I’ll have to come up with a simple way to do that.
Review from a similar Generator Tray in RV Cargo Slides
My old battery tray was a rusted mess that required me to sit on my butt to push it in with my legs. This replacement is a dream! I was able to install it myself in a short amount of time. I've never installed anything like this, but it was easy. My old bolts were rusted (and some broke removing them) so I had to visit Lowes and get help picking out new hardware. That took longer than installing the drawer! I did make a little template out of a large paper bag so I'd know where I wanted the drawer and where to drill my holes--since my two hands weren't enough to hold it in place while pulling out the slide and also mark my spots. If you have someone to help with that part, use them. The drawer slides so smoothly, and it securely holds my batteries with the included straps. I did stuff a small piece of wood between the batteries and each side to ensure the rivets others mentioned don't pierce my batteries, but I'm not sure they would anyway. Just being extra cautious since I had the wiggle room. Highly recommend the product and etrailer. It's my third or fourth purchase from the company, and their customer service is consistently excellent, shipping is lightning fast. (For perspective, I'm a 40-year-old, female, first-time owner of a 21-year-old RV with some handy skills but far from a pro.)
Review from a similar Generator Tray in RV Cargo Slides
Awesome tray
We have a Northwood Arctic Fox 27.5L 5th wheel
We have a Honda 3000 Gen Set that we use periodically so we wanted it easy to use or remove when we don’t anticipate using it. This tray was easy to install. We cut a hole in the base of the storage area to allow better air flow & ventilation for gas fumes and exhaust air movement
Reminder there is no hardware so you have to pick up carriage head bolts and hardware to install
Review from a similar Generator Tray in RV Cargo Slides
Overall condition of tray was received good… the slide of the tray is not as smooth as I would have liked… after putting on a little silicone spray is appears to be better.
Also, there was no mounting hardware included in the package… had to use my own bolts & nuts to secure to my bay floor.
Review from a similar Generator Tray in RV Cargo Slides
Good stable platform for our generator, all night thing I would like to see a lock when it’s fully extended. We run our generator fully extended out keeping it cool and quiet.
Review from a similar Generator Tray in RV Cargo Slides
As described and expected. Low profile made for perfect clearance for equipment space. Used through Bolts for large weight/leverage.
Review from a similar Generator Tray in RV Cargo Slides
Used this to mount Honda 3000k Generator in my trailer generator compartment . Had to install some 2x4 blocks on the bottom of the tray to allow for for added height . Also cut a simple piece of wood so tray would not slide back in while generator is running . Great product , Wish I had done this years ago .
Review from a similar Generator Tray in RV Cargo Slides
Tray is well built and exactly what I needed for my space. They side of the tray rails had a small bend in the side of the tray right out of the box,which must have been there before it was packaged. I was able to bend it back straight using some plastic clamps to avoid damaging the metal surface, good as new now. I installed in my trailer kitchen nook without issue and everything works as it should.
Review from a similar Generator Tray in RV Cargo Slides
They tray itself is ok, literally comes with zero instructions, mounting hardware, or even any direction as to what size is needed. Called customer support who also had no idea, also there's no way to lock it in the out postion to prevent it from sliding back in if even kn the slightest hill or incline. So my generator just slides back in all by itself. It seems well built otherwise which is why it get just an average rating.
Jenny N - 11/24/2021Review from a similar Generator Tray in RV Cargo Slides
The slide tray works perfect, smooth operation, easy installation, carries the weight of a Honda EU 7000 with no problems. I wish I had purchased sooner.
Review from a similar Generator Tray in RV Cargo Slides
I think there needs to be a way to remove the tray with out taking the rivets out, I did and it made it easier to work with because of where it was going. It’s in the battery compartment in front of my 5th wheel a drop of 10 inches.
Review from a similar Generator Tray in RV Cargo Slides
The tray came quickly and is a very well built one. Was easy to install into the front of our fifth wheel for generator.
Review from a similar Generator Tray in RV Cargo Slides
Ordered two drawers: neither would not open to a full extension. Had to pound on them for a while. Eventually, got them to fully extend. May want to check the drawers for full extension prior to shipping. Otherwise the product works fine.
Sierra K - 12/21/2021Review from a similar Generator Tray in RV Cargo Slides
Works well and does what i need it to do with ease.
Review from a similar Generator Tray in RV Cargo Slides
We are very pleased with the generator tray, very happy with how quick our order was processed and arrived.
Review from a similar Generator Tray in RV Cargo Slides
well made, fits my generator and I'm able to pull it away from RV body. I have it mounted externally on a frame added to the back of my 5th wheel
Review from a similar Generator Tray in RV Cargo Slides
Easy to install
Perfect fit
Good price compared to other companies
FREE shipping
Ordered on a Sunday night received Friday morning installed same day 5 days great service
Review from a similar Generator Tray in RV Cargo Slides
Haven't installed yet, but looks to be a great product and I'm excited to use it!
Review from a similar Generator Tray in RV Cargo Slides
Product was as described, quality seems very good.
Review from a similar Generator Tray in RV Cargo Slides
GOT THE ORDER VERY QUICK AND A GREAT DE AL
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.