This tray slides out of your RV so you have easy access to some drinks, steaks, or cartons of ice cream from your secondary fridge or freezer. The sliding design prevents you from straining to reach the food in the back of the fridge.
Features:
Specs:
Bringing some extra guests on your camping trip? This tray slides out of your RV or motorhome and gives you easy access to extra drinks, additional steaks, or a few cartons of your favorite ice cream in a secondary fridge or freezer. When you need to get something out of your fridge, pull the 2 knobs up and slide the tray all the way out until it's completely cleared your cargo compartment.
This is great if you have a fridge that opens from the top, as you'll be able to fully access your groceries without worrying about banging the lid or your hands on the top frame. Additionally, the tray prevents you from rooting around in your cramped compartment and lifting your heavy cooler. When you are finished grabbing a cold one from the fridge, push the tray all the way back in until it's stowed away. The safety latches lock the tray in place, so it won't slide out while you're traveling to the next campsite.
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this MORryde Sliding Refrigerator Tray. This is going to install in your RV's cargo compartment or storage compartment. It's going to allow you to mount your secondary refrigerator or freezer and this is gonna make it much easier for you to access that refrigerator or freezer. So rather than having to kind of hunch over and climb in through your storage compartment, this is going to slide out for you.
So you just lift up on these knobs here and pull out and it will extend up to 40 inches. So that's gonna be plenty of length for you to pull out, get it where you need it to be so that you can more easily access the refrigerator, freezer and get it out where it's gonna be open. You're not gonna have to worry about the confines of your storage compartment. So, if your freezer opens from the top you'll be able to open that up, have no problems. This does have a weight capacity of 225 pounds.
So it's gonna be nice and sturdy for you for your freezer, refrigerator, and any of the food that you have packed in there for your trip. When you're ready to close it back up, it simply slides in and then we've got these two latches here that will lock it in place so that you don't have to worry about that coming undone, sliding around when you're traveling. But I do wanna emphasize just how smooth this is. It's a nice ball-bearing style glide there. So very easy to maneuver.
You don't have to support the weight out here at all. It's gonna support itself very easily. So really nice option for you there, if you do have a freezer or refrigerator that you're wanting to store in your storage compartment of your RV. Now, as far as our dimensions go this is right about 37 and a half inches wide. When I measured that I included the little bolts that are on the sides here.
So you're gonna need at least a 37 and a half inch wide compartment. It is 22 inches deep. I measured that from the very front of our ball latch there to the very back side here. So your compartment needs to measure at least 22 inches deep. And this is about five and a quarter of an inch tall. So, it won't take up much room for heighth but you will want to make sure that once you put your storage cargo, freezer, refrigerator that sort of thing in here that you're gonna have enough height in your compartment. As far as our inside dimensions, you can see they do have these plates here that are going to prevent us from using the full width. But our usable width is about 31 and three eighths of an inch wide. And then our depth is right about 20 inches. And then our height we're at about two and three eighths of an inch. So you can very easily do the math there to figure out how much height you're gonna need for your refrigerator, depending on your compartment size and that sort of thing. So this tray is going to come preassembled for you. So it should be very easy to get installed. They do not include the hardware that you're gonna need to mount this in place, but it is very important that you get it mounted because that weight after it's shifted out. I've had to strap this down to my table here, just to demonstrate the tray itself. Once you put a freezer on there, you're definitely want to have a lot of support here. There are lots of openings. I'm not sure if you'll be able to see those or not but on the inside here, we do have lots of pre-drilled holes that you can use your screws or bolts or whatever it is that you're gonna be using to get this mounted down in place so it will be nice and secure for you. But all of the components for the tray itself are already installed. It comes preassembled. So you're not gonna have to worry about that. Should be very simple to get installed. Just getting that mounted in place. This is made here in the USA. So you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. And this does seem like a really nice product in my mind. If you are tired of having to reach in to your storage compartment, if you wanna be able to bring a refrigerator or freezer out to you, I think this is gonna do a really good job. I think you'll be very happy with it. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (53 Customer Reviews)
This tray slides out of your RV so you have easy access to some drinks, steaks, or cartons of ice cream from your secondary fridge or freezer. The sliding design prevents you from straining to reach the food in the back of the fridge.It was not a good experience. Terrible communication with the shipping company and Etrailer was no help. Had multiple emails with etrailer and was told shipping times cannot be guaranteed. However I was told the estimated delivery date can be weeks longer. After my order was at the local shipping terminal (16 miles from my home) I was told to wait up to two additional weeks. I explained that this was not acceptable and wished to cancel my order. I was told I would have to pay the shipping back to etrailer along with the shipping to the terminal. Did I mention that the phone system at the local terminal was out of service, I tried leaving messages for 4 days. After getting nothing from etrailer I decided to drive to the terminal and try to pick up my order. After some explaining I was able to pick up my order. Today I received this email stating that my order had been delivered, what a joke! Never again with etrailer! FYI my order was over $xxxx.
Worked wonderful thanks
Item arrived timely, well packaged
As to installation was simple , used poly spacers to rase slide plate
Enough to clear door frame ( approx1”) drilled and thru bolted
Into compartment base
Unit accommodation size of 65 yeti fits well and adds convenience
Of outdoor access
Installation in accolade xl 39’ superc
Great product, fast shipping.
Fast service product as listed.
Great product
very good
I installed this in my detailing van to hold my 100lb inverter generator. I wanted 200% extension so I could get behind the generator and in the van for maintenance. I installed the slide on unistruts. There is a good amount of bounce and flex that I was not expecting. It hasn't failed, but I'm not 100% comfortable that it will last. Would've been nice if there were lockouts at 100% and 200%
The MORryde tray I bought is very well built. Easy to install. Slides easy. Simply it works great. E-trailer is the best. Kept me updated on my order. Offered an alternative due to availability. Shipped my tray as soon as they received it.
I purchased this tray to work with a Dometic CFX3 95DZ fridge, installed in a 2023 Newmar Dutch Star. The Dutch Star can come from the factory with the fridge and their OEM tray installed. However, the OEM tray is much more expensive (about 3X!) than this MORryde tray. The tray was easy to install, fits the fridge perfectly (the holes in the bottom of the tray line up perfectly with feet on the fridge, keeping the fridge from moving around), and functions just as well as the OEM tray. Glad I found this instead of ordering the OEM tray from Newmar.
Great product being used as the designer likely did not anticipate. I bolted my propane forge to the tray and slide it well outside the truckbed when in use. Puts it at a perfect height and location to heat horse shoes and turn right around and shape them on the anvil. Much sturdier than swing out brackets I see other forges mounted to. I like this product for its all metal construction, minus the small plastic knob which is far enough from the heat to be safe. If ever needed, I could replace it with a metal knob or simply a bolt.
After a year of using the MORryde slide I can say that this unit is very well constructed and I have had zero issues with the unit. Considering it is my beverage refrigerator it gets plenty of use!
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.