Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.
Features:
Specs:
Note: Do not run your generator while the tray is inside your cargo compartment.
Need a way to easily top off your generator with gas during your next off-the-grid camping trip? This tray slides out of your RV for quick access to your generator so you don't have to crawl into your cluttered or cramped cargo compartment. When you need to add gas, pull the knob up and slide the tray all the way out. When you're finished, push the tray all the way back in until it's stowed away. The safety latch locks the tray in place, so it won't slide out while you're traveling to the next campsite. And to make sure your generator doesn't get banged up while you're traveling down the road, tighten the 2 included adjustable straps over it and secure them to the integrated slots on the tray.
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
Average Customer Rating: 4.6 out of 5 stars (204 Customer Reviews)
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.I purchased the Morryde generator tray for my Yamaha generator. The tray was easy to install in front compartment of 5th wheel rv. The tray easily handles the 150 lb generator and there's enough clearances to access all components of generator including changing oil.
We actually purchased these for two fire engines to hold our ice chest that we have on the engines. They were a perfect fit in our side compartments that allows us to access the cooler via the pull-out trays without having to take the coolers office the engines. The pull outs also make it much easier draining and refilling with water and sports drinks for the firefighters.
I am unsure if I received a faulty product. I am using a 3500 Predator generator for my detailing setup, and the pull out does not stay pulled out unless the ground is slanted. I would of thought I locked in place. Also this set up does not bring the screws or proper hardware.
The tray is resistant and meets my expectations. The only thing that didn't work were the straps. They are too short to be able to secure the generator to the tray. Is it possible that you have others? I need them to be about five inches longer.
Jenny N.
6/5/2024
We do have a variety of straps available that would be longer then the 33.5 inch long straps that come with the slide. Part # TP29QR is an adjustable bungee cord straps that are 36 inches long. Or a ratchet strap like part # IMF12613 which is 3.5 feet long however can be ratcheted down for a tight fit. I am also including a link to other 0 to 5 five straps we carry.
Helpful Links
The Slide Out Tray is perfect! It is very well made and works smoothly. It makes it so much easier to service my generator. I now can slide the generator out to run it instead of having to hook up an exhaust tube to vent the exhaust outside.
I will install tomorrow’s I need to work on mounting the tool box on top
Nickolas J.
6/10/2024
Great i had to modify it I wanted my tool box to come out on the slid it neede a lock so it did not move out when i was driving.
Great generator slider, easy to install and holds the weight of my 100lbs predator generator no problem
Works great. Able
To carry predator generator in tray on fifth wheel
This generator slide out was exactly what I was looking for. My wife had bought a new generator for my race car trailer so now was the time to upgrade. The MORryde generator slide out is very heavy and seems very well built. Slides out and back in easily. The only thing that I would change is the length of straps that came with it. But that is really a non issue as I wasn’t buying this for the straps. It does not come with hardware to bolt it down but this is stated in the description. Each installation is different so again this is not an issue. Very pleased with the product and would recommend this to anyone.
Etrailer was great as usual with quick and fast shipping. The item works mostly as expected. The locking mechanism is not very reassuring. The included straps are way too short. I don’t think just for my generator, I’m not sure they would fit any model honestly.
Great product very easy to install. I do mobile reconditioning on cars and needed to get the generator out of the trailer without breaking my back moving in and out everyday.
This is the perfect solution to my issue with having to load and unload my generator by myself. I can now safely run my generator with the slide pulled all the way out. The quality is excellent and very well put together.
i like the tray ..saved me money being able to use the generator I already had .
heavy duty slide extensions . Good purchase .
Thanks for keeping my informed as to my order status. I received the MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" in perfect condition. The weight of the item is 52 lbs. and is well built. It will be perfect for my Portable Onan 4500i Generator, which ways about 100 lbs. I haven't installed the tray yet, but it will work out perfect in the rear storage compartment on my 5th Wheel Trailer.
SUPER FAST shipping, exactly what I needed. ::high five:: thank you! Our generator was side swiped and the tray was the only part damaged. You guys had exactly what we needed and I got it so fast that we didn't miss a day of ice cream for doggies! Now my busted generator tray is back to pristine and perfect.
This product works great.
Predator 3500 watt generator super easy to take out and put back.
Just installed mine. High quality, well crafted unit. I'm extremely happy with it.
Using it for trailer generator
Works great
Great customer service. Received within two days. Good quality and exactly what I needed and ordered. I’m using as a slide for a toolbox. I have order before from etrailer, and will order again.
Just received the tray. Not installed yet but quick shipping to me
I have a mobile auto detailing business. I use my generator to power everything! So I am pulling this try in and out many times a day. I have had no issues with it at all. I love how smooth it rolls. Great product and amazing craftsmanship.
Overall condition of tray was received good… the slide of the tray is not as smooth as I would have liked… after putting on a little silicone spray is appears to be better.
Also, there was no mounting hardware included in the package… had to use my own bolts & nuts to secure to my bay floor.
Very pleased with my purchase. Perfect fit for my application. Happy vith the price also.
Awesome tray
We have a Northwood Arctic Fox 27.5L 5th wheel
We have a Honda 3000 Gen Set that we use periodically so we wanted it easy to use or remove when we don’t anticipate using it. This tray was easy to install. We cut a hole in the base of the storage area to allow better air flow & ventilation for gas fumes and exhaust air movement
Reminder there is no hardware so you have to pick up carriage head bolts and hardware to install
Kelly
5/10/2023
This tray has worked excellent for our needs. I would recommend it to anyone.
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/28/2024
I can see where that would be a bit troublesome. I reached out to MORryde about it. This tray does not have a lock in the out position. They had had people add blocking or a lock on their own to allow the generator to stay in place. I wish that I had an official solution to recommend for you.