MORryde RV Generator Slide Out Tray - 19-1/4" x 22-3/4" - 100 Percent Extension - 250 lbs
(35 reviews)
Price: $251.17
In Stock
MORryde RV Generator Slide Out Tray - 19-1/4" x 22-3/4" - 100 Percent Extension - 250 lbs
Item # MR89RR
Our Price: $251.17
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (35)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
MORryde RV Cargo Slides - MR89RR
- 22-3/4 Inch Long
- 19-1/4 Inch Wide
- MORryde
- 1 Way
- Generators
- 100 Percent Extension
- Preassembled Tray
- 250 lbs
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.
Features:
- Utility tray slides out for easy access to the generator in your RV's storage cargo compartment
- Grab your generator or add gas to it without crawling into a cluttered or cramped compartment
- Works with most common RV generators
- Safety latches lock the tray in the stowed position to prevent it from sliding open while traveling
- 2 Black knobs are pulled sideways to slide the tray out
- 2 Adjustable straps tighten over your generator to keep it firmly in place on the tray
- Durable steel construction with black powder coat finish
- Bolt-on installation in your storage compartment
- Tray is preassembled
- Hardware not included
- Made in the USA
Specs:
- Fits: RV cargo compartments at least 19-1/4" deep
- Weight capacity: 250 lbs
- Tray extension: 100 percent
- Overall dimensions: 19-1/4" long x 22-3/4" wide x 3-1/4" tall
- Tray dimensions: 17-1/2" long x 20-3/4" wide x 2-1/2" tall
- 1-Year limited warranty
Note: Do not run your generator while it's sitting on this tray.
Need a way to easily top off your generator with gas during your next off-the-grid camping trip? This tray slides out of your RV for quick access to your generator so you don't have to crawl into your cluttered or cramped cargo compartment. When you need to add gas, pull the knobs sideways and slide the tray all the way out. When you're finished, push the tray all the way back in until it's stowed away. The safety latches lock the tray in place, so it won't slide out while you're traveling to the next campsite. And to make sure your generator doesn't get banged up while you're traveling down the road, tighten the 2 included adjustable straps over it and secure them to the integrated slots on the tray.
Bolt-On Installation
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
SP60-047 MORryde Generator Tray 19-1/4" x 22-3/4"
Video of MORryde RV Generator Slide Out Tray - 19-1/4" x 22-3/4" - 100 Percent Extension - 250 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of MORryde RV Cargo Slides - Sliding Generator Tray - MR89RR
Hi, there, I'm Michael with etrailer.com. Today, we're going to take a quick look at this MORryde generator tray. This is going to make it much easier for you to access your generator compartment, to work on your generator, or to change out your batteries, whatever it is you're using your compartment for, rather than having to bend over and reach in, try and find your way into the compartment, which can be hard on your back, this is going to slide all the components out to you to make it much easier for you to access them. This does have ball bearings that allow for a nice smooth slide. So, it's going to be very easy to pull your generator, or batteries, or whatever you're using the tray for, out to you so that you can work on the outside of your RV, and won't have to climb back into that compartment. This does have a weight capacity of 250 pounds, so it's going to be plenty for just about anything that you're putting in that compartment, and, because of those ball bearings, it will still slide nice and smooth, won't take much effort at all.
Now, you can see, we do have these spring loaded clamps on the front here that will lock the tray in place, so, as we're traveling, we don't have to worry about our tray moving around, sliding out. To disengage we just pull back on the knob here, and that will allow us to pull our tray out. So, very easy to use and operate, very smooth for you. They do have these straps here that have the buckle clips on them, so you can tighten those down, cinch them to the right tension that you need to make sure that your generator is going to be nice and stable in there. It's not going to be sliding around as you're going down the road.
So, these are going to be really nice. And then, if you do need to take your generator out, very easy to disconnect those and get them reconnected again. Now, this does come preassembled for you. so you're not going to have to worry about putting parts in. You can see on the bottom side here our screw holes are very accessible, so just getting some wood screws to go into the flooring of your compartment to make sure that the tracks will stay in place.
It's going to be very easy to get this installed, but that hardware is not included, but again should be very easy for you to mount this in place. Now, as far as our dimensions go, our outside dimensions, including our tracks here, we're gonna be right about, call it 19 and 1/4 of an inch long. That's going to be including our knobs here. These stick out a little bit farther for us, so right about 19 and 1/4 of an inch long. So, it is going to be compatible with your RV compartments that are at least 19 1/4 inches deep.
As far as our width goes, I measure from the sides of our latches here, so that's going to be a total width of about 23 inches. Now, those latches don't necessarily need to be completely sprung out as they are here, so you might be able to fit it into a slightly smaller compartment, but probably not a whole lot before you have to worry about those not being engaged properly. So, I'm going to call about right at 23 inches wide. And then as far as our height goes, we're right at 3 and 1/4 of an inch tall. Our inside dimensions are going to be a little bit smaller, obviously. So, our depth here is right at 17 and 1/2 inches, just shy of 17 and 1/2, but right at 17 and 1/2, so should be plenty of room for you as depth goes. And then our width, right at about 20 and 3/8 of an inch wide, and then our height, we're about 2 and 3/4 of an inch tall. So again, 17 and 1/2, 20 and 3/8, and then about 2 and 3/4 of an inch tall. So, it should be quite a bit of room for you there to get your generator put in place. Now, when we do disengage our tray, and pull it out, we're going to have about 17 and 1/4 of an inch of travel along this tray. So, I measured that from where our spring loaded latches end up versus where they started back here. So, that's going to be right at 17 and 1/4 of an inch or so, should be sticking out of your generator compartment on your RV, so you should have plenty of room to reach in, deal with anything that you need in there. This is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So, it should hold up well, do a good job for you for a long time to come. So, that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Reviews
MORryde RV Generator Slide Out Tray - 19-1/4" x 22-3/4" - 100 Percent Extension - 250 lbs - MR89RR
Average Customer Rating: 4.7 out of 5 stars (35 Customer Reviews)
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.by: Greg 05/03/2021
I must admit that I was PO'd when the tray arrived as the box had a different part number and different dimensions listed on it as opposed to those on etrailer's site. The issue was solved by Montrel M at etrailer via phone even though I had previously sent 3 emails. Within an hour all was settled. My apologies. As for the tray it looks great and is made well. I'm sure it will work fine. Now, can etrailer put the Mfg part number under their own part number for clarification if necessary.
Comments
Great and expect the same for years to come
Greg - 05/04/2022Comments
Great piece of equipment.
Greg - 06/26/2022by: Kevin11/25/2021
As described and expected. Low profile made for perfect clearance for equipment space. Used through Bolts for large weight/leverage.
by: Robert05/02/2022
Used this to mount Honda 3000k Generator in my trailer generator compartment . Had to install some 2x4 blocks on the bottom of the tray to allow for for added height . Also cut a simple piece of wood so tray would not slide back in while generator is running . Great product , Wish I had done this years ago .
by: Nate05/02/2021
Tray is well built and exactly what I needed for my space. They side of the tray rails had a small bend in the side of the tray right out of the box,which must have been there before it was packaged. I was able to bend it back straight using some plastic clamps to avoid damaging the metal surface, good as new now. I installed in my trailer kitchen nook without issue and everything works as it should.
by: Curt 11/15/2021
We are very pleased with the generator tray, very happy with how quick our order was processed and arrived.
by: Nelson02/14/2022
Easy to install
Perfect fit
Good price compared to other companies
FREE shipping
Ordered on a Sunday night received Friday morning installed same day 5 days great service
by: Dave 11/04/2021
Product was as described, quality seems very good.
by: Brian 06/03/2021
Great service and products
by: Jason 07/30/2021
My order shipped on the date they said it would even though it was on back order, great customer service
by: Edward 10/05/2021
by: Robert 09/16/2021
by: Dennis 11/19/2021
by: Rick11/07/2021
by: Thomas E04/21/2022
Review from a similar Generator Tray in RV Cargo Slides
Thanks for keeping my informed as to my order status. I received the MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" in perfect condition. The weight of the item is 52 lbs. and is well built. It will be perfect for my Portable Onan 4500i Generator, which ways about 100 lbs. I haven't installed the tray yet, but it will work out perfect in the rear storage compartment on my 5th Wheel Trailer.
by: Colin09/29/2021
Review from a similar Generator Tray in RV Cargo Slides
They tray works well for my application. I got lucky on the size, if it was any bigger than 15-3/4” deep it wouldn’t have fit the compartment.
I had to mount it on wooden blocks so the slides would clear the front lip of the box. Great deal for the money compared to fabricating a sliding tray from scratch. It has no latch to lock the slide in the out position however so I’ll have to come up with a simple way to do that.
by: Kelly05/08/2022
Review from a similar Generator Tray in RV Cargo Slides
Awesome tray
We have a Northwood Arctic Fox 27.5L 5th wheel
We have a Honda 3000 Gen Set that we use periodically so we wanted it easy to use or remove when we don’t anticipate using it. This tray was easy to install. We cut a hole in the base of the storage area to allow better air flow & ventilation for gas fumes and exhaust air movement
Reminder there is no hardware so you have to pick up carriage head bolts and hardware to install
by: keom06/16/2021
Review from a similar Generator Tray in RV Cargo Slides
My old battery tray was a rusted mess that required me to sit on my butt to push it in with my legs. This replacement is a dream! I was able to install it myself in a short amount of time. I've never installed anything like this, but it was easy. My old bolts were rusted (and some broke removing them) so I had to visit Lowes and get help picking out new hardware. That took longer than installing the drawer! I did make a little template out of a large paper bag so I'd know where I wanted the drawer and where to drill my holes--since my two hands weren't enough to hold it in place while pulling out the slide and also mark my spots. If you have someone to help with that part, use them. The drawer slides so smoothly, and it securely holds my batteries with the included straps. I did stuff a small piece of wood between the batteries and each side to ensure the rivets others mentioned don't pierce my batteries, but I'm not sure they would anyway. Just being extra cautious since I had the wiggle room. Highly recommend the product and etrailer. It's my third or fourth purchase from the company, and their customer service is consistently excellent, shipping is lightning fast. (For perspective, I'm a 40-year-old, female, first-time owner of a 21-year-old RV with some handy skills but far from a pro.)
by: Garry N10/01/2021
Review from a similar Generator Tray in RV Cargo Slides
Overall condition of tray was received good… the slide of the tray is not as smooth as I would have liked… after putting on a little silicone spray is appears to be better.
Also, there was no mounting hardware included in the package… had to use my own bolts & nuts to secure to my bay floor.
by: Kelly06/14/2022
Review from a similar Generator Tray in RV Cargo Slides
Good stable platform for our generator, all night thing I would like to see a lock when it’s fully extended. We run our generator fully extended out keeping it cool and quiet.
by: Michael11/23/2021
Review from a similar Generator Tray in RV Cargo Slides
They tray itself is ok, literally comes with zero instructions, mounting hardware, or even any direction as to what size is needed. Called customer support who also had no idea, also there's no way to lock it in the out postion to prevent it from sliding back in if even kn the slightest hill or incline. So my generator just slides back in all by itself. It seems well built otherwise which is why it get just an average rating.
Comments
I reached out to the manufacturer and while there is not a manual they advised that you do want to use all the mounting holes and that it has a 300 pound weight limit. The outside dimensions are 25 and three quarters inches long x 26 and a quarter inches wide x 5 inches tall. The inside dimensions are 24 inches long x 24 inches wide x 2 and three quarters inches tall. You are correct that there is not a lock or latch for the full out position. I would look for a place to place a wedge to keep it out as necessary. I cannot ee any reason that you cannot run a generator in the in position or the out position, assuming that you have proper ventilation to keep carbon monoxide out of your coach or trailer. Be aware that the the tray does not pull the full length of the drawer out.
-- 
Jenny N - 11/24/2021by: Jeff04/13/2022
Review from a similar Generator Tray in RV Cargo Slides
The slide tray works perfect, smooth operation, easy installation, carries the weight of a Honda EU 7000 with no problems. I wish I had purchased sooner.
by: Norman 12/28/2021
Review from a similar Generator Tray in RV Cargo Slides
I think there needs to be a way to remove the tray with out taking the rivets out, I did and it made it easier to work with because of where it was going. It’s in the battery compartment in front of my 5th wheel a drop of 10 inches.
by: Elizabeth 12/13/2021
Review from a similar Generator Tray in RV Cargo Slides
The tray came quickly and is a very well built one. Was easy to install into the front of our fifth wheel for generator.
by: Gregg12/20/2021
Review from a similar Generator Tray in RV Cargo Slides
Ordered two drawers: neither would not open to a full extension. Had to pound on them for a while. Eventually, got them to fully extend. May want to check the drawers for full extension prior to shipping. Otherwise the product works fine.
Comments
Some lubrication spray may be needed to maintain smooth extension.
-- Sierra K - 12/21/2021by: Kenneth05/12/2022
Review from a similar Generator Tray in RV Cargo Slides
Works well and does what i need it to do with ease.
25
35
Show More Reviews
Ask the Experts about this MORryde RV Cargo Slides
- Could 22 inch Blackstone Griddle Fit on MORryde Generator Tray MR89RRYou'll have to measure the outside dimensions of the base of your 22 inch Blackstone but the most likely to fit MORryde Generator tray would be the part # MR89RR you mentioned which has inner dimensions of 17-1/2" long x 20-3/4" wide x 2-1/2" tall.
view full answer... - Why Can't You Run the Generator in a Generator Slide Out TrayThe reason that you cannot use the generator while it is in the MORryde RV Generator Slide Out Tray # MR89RR is because the tray only locks in the stored position. If you use the generator in the tray, it could potentially slide back into the storage compartment and cause CO2 to get into your RV. The purpose behind the MORryde RV Generator Slide Out Tray # MR89RR is to make getting your generator in and out easier.
view full answer... - What Is The Dimensions Of The MORryde RV Generator Slide Out Tray?We actually went ahead and measured the MORryde RV Generator Slide Out Tray # MR89RR ourselves, and we measured 17-1/2" wide for the inside (outside, 19-1/4"), 20-3/8" deep for the inside, (23" outside), and 3-1/4" tall. This cargo tray also has a maximum weight capacity of 250lbs, and is made in the United States!
view full answer... - Recommended RV Tray For Carrying Predator 3500 GeneratorKwikee RV Battery Tray - 18-5/16" Long x 24-9/16" Wide - Steel - 200 lbs # LC366499 would likely work well for holding a generator under 200lbs. Just make sure your generator is no more than 17-1/8" long and 22-1/8" wide However, I do think a better option would be MORryde Generator Tray - 19-1/4" x 22-3/4" # MR89RR which has inside dimensions of 17-1/2" long and 20-3/4" wide and has a higher weight capacity of 250lbs. This also comes with straps and is more affordable than the Kwikee...
view full answer...
Do you have a question about this RV Cargo Slide?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality rv cargo slides for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate rv cargo slide information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Updated by:
Leah S
Written by:
Mary E
Edited by:
Amanda M
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.