Solar Powered LED Porch Light for RVs - Dusk-to-Dawn and Motion Sensors - Weatherproof - 400 Lumens

Diamond RV Exterior Lights - DG0132

Motion-activated, solar powered LED porch light with dusk-to-dawn sensor provides lighting, safety, and security. 3 Preset modes let you customize the light to suit your needs. Solar panels charge the battery so there's no wiring required.

Features:

• Solar powered LED porch light with dusk-to-dawn and motion sensors provides lighting, safety, and security
• Built-in smart sensors automatically activate light when you need it
  • Dusk-to-dawn detector senses natural light and activates light at sundown
  • Motion sensor activates light when it detects movement up to 19-1/2' away
• 3 Preset modes allow you to customize the light to suit your needs
  • Mode A activates dim light at sundown and provides light throughout the night
  • Mode B ramps light to full brightness for 20 seconds when it detects motion, then returns to dim
  • Mode C keeps light off until motion is detected and stays on for 30 seconds
• Rear-facing pushbutton cycles modes and activates LED backlight
  • Backlight provides minimal lighting when unit is in mode A and B
• Integrated solar panels charge the lithium-ion battery - no wiring required
• Long-lasting SMD LEDs create a bright, solid panel of light
  • No bulbs to replace - no brittle filaments
• Curved housing is IP65 rated for protection against dust and water
• Easy installation on any flat surface - mounting hardware included
  • Light should be mounted no higher than 13' off the ground

Specs:

• Dimensions: 8-1/2" tall x 5-1/2" wide x 4-5/16" deep
  • Distance between mounting holes (center on center): 2-1/8"
• Motion detection area: 19-1/2'
  • Angle: 120 degrees
• Light type:
  • Front light: bright white
  • Back light: soft white
• Light output: 400 raw lumens
• Diodes:
  • Front light: 84
  • Back light: 2
• Bulb life: 35,000 hours
• Wattage: 3.2 watts
• Battery type: 2000mAh lithium-ion
• 2-Year warranty

This solar powered LED porch light is a great option for lighting up the exterior of your RV or adding extra security lighting to a shed, garage, or trailer. An integrated dusk-to-dawn light sensor automatically activates the light when it gets dark. A motion detector triggers the light to turn on when it detects movement, illuminating a large area for increased safety and security during your comings and goings. Preset modes enable you to choose the way the light responds to motion to fit your specific needs. Built-in solar panels charge the light's lithium-ion battery to provide over 35,000 hours of use.

Solar Powered RV Porch Light

Solar panels line the top of the light and convert sunlight into long lasting power. And because the light is powered by the sun, there is no need to replace batteries or deal with messy wiring. To keep the light running at peak efficiency position it in direct sunlight during daylight hours.

The lower section of the light contains 84 surface-mount LEDs that produce a bright white light that is ideal for illuminating a large area. These high quality diodes produce a solid panel of light for enhanced visibility.

The back of the light contains 2 LEDs that provide a soft white light for visibility in the immediate area around the light.

Dusk-to-Dawn Light Sensor

An integrated dusk-to-dawn sensor monitors natural light levels and keeps the light from activating until it's needed. This feature increases the light's efficiency by keeping it inactive during the day and allowing it to run longer through the night. The sensor activates the light when it detects less than 30 lumens of ambient light.

Motion Detector with 3 Preset Modes

A built-in motion detector monitors a 19-1/2' area and has a detection angle of 120 degrees. When motion is detected, the light will activate to the preset mode you have selected. There is a button located on the back of the light that allows you to cycle through the 3 available modes. Press the button 4 times to deactivate the light.

In Mode A, the light activates at sundown and produces a dim light throughout the night. This setting is ideal for providing a gentle light throughout the night, preventing missteps and increasing safety.

In Mode B, the light will once again switch to a dim light at sundown. The light activates to full brightness when motion is detected. 20 Seconds after motion is no longer detected, the light dims and gently illuminates the surrounding area. This mode is great for signaling the arrival of visitors to your area while still providing a functional light source around the RV.

In Mode C, the light acts like a security light. Instead of activating at sundown, the light doesn't turn on until it detects motion. It then stays on for 30 seconds after motion is no longer detected. This is great for when you're bringing supplies into the RV, or for deterring unwanted visitors.

Simple Installation with Included Hardware

Installing the light is a simple process, and it comes with everything needed for mounting. The included template helps to determine where you would want to install the light before drilling the installation holes. With the holes drilled, insert the wall anchors and screws to position the light. Once you have the light hanging in the position you want, tighten down the screws to secure the light in place. If you would prefer a temporary application, it is recommended that you utilize double-sided tape, or suction cups with hooks to hold the light in position as needed.

The light should not be installed higher than 13' off the ground. This will ensure the motion detection sensor can operate at peak performance.

DG0132 Diamond Products Auto LED Solar Wall Light Outdoor Light for Motorhomes - 3.2 Watt - 400 Lumen - 84 Diodes - Motion Activated