bing tracking image
  1. RV Interior Lights
  2. Optronics
  3. Dome Light
  4. LED Light
  5. Surface Mount
  6. 12V
Optronics LED RV Dome Light w/ Trim Ring - Click On - 6 Diodes - Brushed Nickel - Clear Lens

Optronics LED RV Dome Light w/ Trim Ring - Click On - 6 Diodes - Brushed Nickel - Clear Lens

Item # UCL60CSWNB
lowest price pledge
Retail:$29.95
Our Price: $15.40
You Save: 49%
RV Interior Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.06 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
3" Diameter round. Low-profile LED dome light produces bright white light to illuminate an interior area in your RV. Touch activation turns light on and off. Surface mount with brushed nickel trim ring. 2-Wire design. Lowest Prices for the best rv interior lights from Optronics. Optronics LED RV Dome Light w/ Trim Ring - Click On - 6 Diodes - Brushed Nickel - Clear Lens part number UCL60CSWNB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (9)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Optronics RV Interior Lights - UCL60CSWNB

  • Dome Light
  • LED Light
  • Surface Mount
  • 12V
  • 3 Inch Diameter
  • With Touch Sensor
  • Brushed Nickel
  • Optronics

3" Diameter round. Low-profile LED dome light produces bright white light to illuminate an interior area in your RV. Touch activation turns light on and off. Surface mount with brushed nickel trim ring. 2-Wire design.


Features:

  • Low-profile LED dome light produces bright white light to illuminate an interior area in your RV
  • Touch activation - light turns on and off with a simple press
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Sealed, waterproof housing and lens unit
  • Durable polycarbonate lens and housing
  • Clear lens over white LEDs
  • Compatible with 12V DC systems
  • Surface mount installation with brushed nickel trim ring - hardware not included
  • 2-Wire pigtail includes power lead and ground wire
  • CSA Certified


Specs:

  • Dimensions: 3" diameter x 3/8" thick
  • Wire size: 18 gauge
  • Diodes: 6
  • Power draw at 12.8V: 0.02 amps
  • Lifetime warranty on LEDs


Optronics UCL60 Series LED Dome Light with Touch Switch Dimensions

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



UCL60CSWNB Optronics LED RV Interior Dome Light w/ Trim Ring - Touch Activation - 6 Diodes - Brushed Nickel - Surface Mount - Clear Lens




California residents: click here


Video of Optronics LED RV Dome Light w/ Trim Ring - Click On - 6 Diodes - Brushed Nickel - Clear Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics LED RV Dome Light with Trim Ring Review and Installation

What's going on, everybody Adam here, with etrailer. Today, we're gonna be taking a look at the Optronics RV dome light. If you're looking to maybe light up a room in your RV, maybe even on the outside of your RV or enclosed trailer, or if you're just on the inside like this, it's gonna be a great light for you. It's gonna give off a lot of brightness. It's about six diodes. It's pretty bright and it is LED, so it's not really gonna take a whole lot of load.

It's gonna be for your 12 volt DC systems, and it's only going to draw about 0.02 amps. That's hardly anything, especially compared to any incandescent type bulb. What I really like about it, is it looks really good. I like the bezel, and the cool thing about it is, it is touch sensitive. So, if you touch it like that, it'll go off, and then of course, it'll come back on.

I really liked that, just because there's no bulky switch, and it's just kinda cool and sleek. People don't know how to turn it on Just be like, just touch it. It's kinda like a clap-on-clap-off. It's kind of a cool little feature. And I really liked that.

One thing about this that I also like, is the fact that it's an enclosed system. So, you don't have to worry about putting any seals or anything around it. The water is not gonna get to it, if you plan on putting it outside. It isn't gonna be activated by touching the outside bezel, or even the outside LEDs here. All you gotta do is present right in the center, and it'll turn on.

If you're a little off center, it probably won't do it. So be sure to press it right in the center to get it on and off. One thing about this light is, it's pretty small, but it puts out a lot of brightness. It's really hard to look at it, honestly, and it really is low profile, small. About three inches in diameter, and it's only gonna sit off the wall about 3/8 of an inch, which isn't a lot at all. So, if you do end up putting it maybe up top, or even on the side, it's not really gonna stick out a lot, so you won't even know it's there, until you touch it, and you'll definitely know it's there, after that. I really like this, because it is touch, and it's also waterproof. That is two things I really like. And the third thing, is that it's LED. If you have incandescent bowls in your trailer or your RV, you are using so much unnecessary energy. If you go with LEDs, you're really gonna save a lot. So, you can put twice as many lights, maybe even four times as many lights, if they're LED, compared to the incandescent, and draw about the same amount. There really isn't much else to go over, besides the installation. So, if you stick around, we're gonna show you how. First things first, we wanna figure out exactly where we want our light. I'm gonna just put it right here, to replace the light that was here already. And, if you have wires ran, awesome, we can skip that step, but if you don't, run some wires. We're gonna need a positive and a negative. So, now that that's done, you can go ahead and take the bezel off, set that to the side for now. And then you can go ahead, and check out our two wires. So right here, we're gonna have the white being negative, and black being positive. It's opposite of what I have here, so just make sure you triple check, and make sure you connect them to the right ones, 'cause if you don't, it probably won't work. So, we'll go ahead and start with the ground. I'm using some heat shrink butt connectors. I'm gonna put this down for a second. I like to just do one wire at a time. So, go ahead and strip your wires back, twist them together, and then take our heat shrink butt connector, twist it on. If you don't have any, we do. So, just go on our website, add as many as you need, and you are good to go. No need to run to the hardware store. So, go ahead and crimp that down. Make sure it's nice and tight. Here's a good tug, because we don't want that to fall out, especially when we put our wires back in there. So, I'm gonna do the same thing with our positive wire, right here, and same deal, clip her down, and then make sure she's good and tight, just like that. And then, we can go ahead and take our light and do the same exact thing. Again, these wires are not colored the same, but that's why I always recommend that you test the function. You match your wires by function, not by color. This is a perfect example for that. So, go ahead and do the same thing. Crimp it down, give it a tug, and the same thing for the other wire. Currently, I have all the power cut, so we're not gonna see any lights lighting up. And I highly suggest doing that whenever you're doing any type of wiring, cut that power. Just so there's no juice going through the wires we're messing with. All right. Now that that's done, you can go ahead and get a heat gun. If you don't have a heat gun, you can get away with maybe a hairdryer or something. It might take a little bit longer than this. But, these are the best way to really bind two wires together, keep all that water out, and even if you didn't crimp it down well enough, this rubber would do a good job to keep those wires in place. I always just like doing a good job now, so you don't have to do it again later. Perfect. One issue I ran into, on the back of this, it says that the black wire's positive, and the white wire's negative. That's how it hooked it up before, and you can remember how they weren't colored correctly, but we didn't get any light. So, we dug in and that was the issue. So, don't necessarily go by that. Maybe just touch them together to make sure that it is the right configuration, before you use two heat shrink connectors. That's just a little tip for you, but now we're gonna go ahead and kind of feed our wires back through the hole, just like that. And I'm gonna triple check this time and make sure that it's gonna light up. There you go. And if it isn't lighting up after you switched the wires, give it a good tap, 'cause it might just be on the off position. But now we're good, and we're ready to mount it up. The mounting hardware is not included, and when you are picking out your mounting hardware, you wanna make sure it's gonna be small enough, because right here, it's going to kinda hit that LED, as you can see. And then also, it's gonna go let me get this undone, it'll go on the outside of this ridge, which is gonna prevent this bezel from securing properly. So, you definitely wanna get something small. What I'm doing, is I'm using this little self-tapper, and it's a 1/4 inch drive, so this is gonna be small enough for us to go ahead and get it lined up. And, it's not gonna interfere with that bezel, which is always a plus, because we wanna put that on, because it gives it a nice little look. So, just a quick tip, we can go ahead and line it up with this existing hole right here. Get it started, we'll take our 1/4 inch socket and screw it down. We don't wanna do it too fast. If you can't do it by hand, you can use a tool, but we don't want to crack this housing, 'cause it is a sealed system. Last step. Now that it works and is mounted down, you can go ahead and take our bezel and snap it on, just like that. And we are good. And that'll do it for a look at the Optronics LED RV dome light..


Customer Reviews

Optronics LED RV Dome Light w/ Trim Ring - Click On - 6 Diodes - Brushed Nickel - Clear Lens - UCL60CSWNB

Average Customer Rating:  4.6 out of 5 stars   (9 Customer Reviews)

3" Diameter round. Low-profile LED dome light produces bright white light to illuminate an interior area in your RV. Touch activation turns light on and off. Surface mount with brushed nickel trim ring. 2-Wire design.

by:

etrailer was one of two sources I could find for this light and was the least expensive. It was an exact replacement and easy to install. etrailer shipped the same day as they usually do and it arrived promptly and carefully packaged. etrailer is one of my go to sources for RV parts and usually is the first place I look.


Comments
Fast to rrive. Easy to install. Works great.
Steve F - 07/30/2021


by:

Great lights! They put out a lot of bright light for such a small unit. Replaced two hanging lights over the island counter in my 2016 Rockwood Signature Ultra Light camper. Installation was quick and easy using original wiring. Both lights are operated by a wall switch and If having two lights on at the same time is too much, can turn one off by just touching it. Used original mounting screws to obtain a flush ceiling mount. Very happy with this modification.




by:

One worked, and one didnt.


Comments
The LED lights have a lifetime warranty. I will have Customer Service reach out to you.
-- Etrailer Expert Sierra K - 10/14/2021


by:

Great over the bed reading light.Way nicer than those cheesy plastic housing lights. A no brainer update
to modernize and create a sleeker look.




by:

Great communication , item was shipped immediately and received very fast , will definitely reccomend and buy again , thank you




by:




by:

Good service quick delivery




by:

Quick, excellent pricing !




by:



9
9

See what our Experts say about this Optronics RV Interior Lights






  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv interior lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv interior light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Adam E
Installed by:
Adam E
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.