Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a real quick look at this replacement SnapPad mini jack pad. This heavy duty rubber pad is going to snap onto your RV's leveling jack to make leveling faster and easier, eliminating the need to crawl under your trailer to position plastic pads or wood blocks. Now, this pad is designed to fit Class C motorhomes and travel trailers with six inch round jack feet. And this is also going to be compatible with BAL, Ultra-Fab and VIP 3000 leveling jacks and the Bigfoot hydraulic leveling system. Now, lemme go ahead and turn this around and retrieve my ruler here and just give you some measurements so you can be confident this is going to work for you.
Looking at the diameter, we are sitting at 7 3/4 inches. The overall height, we're sitting right at about 1 3/4 inches tall. And then the height from the top of the foot platform to the lip of the pad, we're sitting about three quarters of an inch and I weighed this pad earlier and it weighs a little bit under 2.5 pounds. So as you no doubt know, the increased surface area of your leveling jack's feet is going to provide added support for your trailer, preventing sinking into soft ground, unlike your smaller metal feet. Now, these pads are made here in the USA of durable heavy duty rubber that's actually made from recycled tires.
And they're going to grip uneven terrain and prevent your metal feet from rusting or bending. And the built-in drains are going to release moisture to prevent your jack feet from corroding. And this pad is also going to serve as a cushion so your metal feet won't crack or chip away at your driveway, and they're going to help dampen vibration from inside your motorhome that could cause shifting. There's not going to be any need to remove or replace this pad or carry other jack pads or blocks around with you. This is going to be a simple one-time installation.
You're just going to line up the pads beneath your jack feet and lower each foot until the lip on the pad fully engages and locks in place. And you're actually going to hear a snapping sound once the pad is securely installed. So installation is permanent, and once you have the SnapPad secured, you're never gonna have to worry about crawling under your RV to place pads again. So with this, you're going to get one replacement pad and if you're needing more than one and you're looking for a set, the good news is we do also carry this in a set of four. And on your screen, I am including our item number for you for that set of four.
And you can just put that item number and put it in the search field of our website and it will take you to that set of four if you need more than just this one. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining.
Average Customer Rating: 4.8 out of 5 stars (4652 Customer Reviews)
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.This SnapPad is loose on my front jack. Front jack is a VIP 3000 by Barker and is on a Airstream Flying Cloud 30FB. It measures to 6" and installed very easily but also comes out without much effort, so not sure it will last long when traveling. We will see and I will update as necessary.
Shipping took extremely long for an in stock item. Ordered on a Sunday, delivery on a Saturday... and I live about 1.5 miles from etrailer. Half of that is the fault of the USPS but it also took a few days to leave eTrailer.
The SnapPads were easy to install, make leveling easier and have stayed on the RV for 10,000 + miles. We won't hesitate to purchase them again for future RVs.
I have had snap pads on all our trailers work really good. Bought the small single for our utility trailer.
Good protection and bigger foot print.
We ordered this 6" jack pad for the power tongue jack on our Alliance Delta 252RL travel trailer and it fits perfectly. It will really make it nice even if we need to use a block to raise it. It will definitely not move.
Superb quality. It fits perfectly on top of the Anderson jack block.
Heavy duty!
Fits my 2017 International Airstream perfectly. Easy install too with a little liquid soap.
Tried to send back the one that didn’t fit. You tried to charge me half the price of the item to send it back.
Excellent addition and easy to install.
It the.best pad ever. Thanks
After year of use, been great experience. Durable stay put and provide stability.
Nice upgrade for my stabilizers, look great and I fully expect them to perform well. Makes deploying the stabilizers a simple process not having to worry about lining up blocks of wood or other support pads below the feet as they deploy. One note for anyone installing these, we let them sit out in the sun for a while to get nice and hot and the install went very easy. No need to use soap or struggle at all with them conforming to the stabilizer pads.
Well made and a great fit. Adds a larger, more stable footprint.
Product was a perfect fit for my motor home. The chat person helped pick it out and it came in a couple of days. This is the second time that I have bought from etrailer. They are a first class operation!
Bought the wrong part and they gladly sent me the correct one. Thank You for your service
Solid build and fit. Installs and works as expected. This will not be coming off!
come on time can't wait to use them
Great customer service & quick delivery! I am a repeat customer.
Love ordering from etrailer. Great products….quick shipping….and excellent customer service and follow through. Thank you.
I love ordering from a trailer. I always get my quality product shipped very quickly with excellent. Follow up customer service.
Easy to install and work great. Already have 4 on my Airstream stabilizers, adding this one for the powerjack stand.
It fit perfectly and installed easily. It looks to be heavy duty and very durable. I am very happy with it.
Wow was that an easy install.
This worked perfectly for my 28ft Volante travel trailer...
One less thing to think about and really does expand the footprint. I’m glad I added this to my new jack.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/2/2024
These pads should be snapping on for you and staying on. Sometimes there is a clearance issue around or above the metal foot. You would want to have at least 2 inches of full clearance to the sides of the retracted foot and at least 0.75 inches of clearance from the top edge of the foot and above. In transit ground clearance can also cause pad loss. When traveling over curbs, speedbumps, and potholes the landing feet can be set closer to the ground and when driving over these areas the suspension of the rig forces the feet further down. It is recommended that a minimum of 6 inches of full ground clearance is needed to safely use the pads.