SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet - Qty 4
(3753 reviews)
Price: $109.95
In Stock
SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet - Qty 4
Item # SN99FR
Our Price: $109.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (3753)
- Q & A (0)
- Photos
SnapPad RV Jack Pads - SN99FR
- 6 Inch Jack Foot
- SnapPad
- Square Foot
- 4 Jack Pads
Designed for travel trailers with Lippert Level Up jacks with 5-3/4" to 6" square jack feet. Sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Includes 4 pads.
Features:
- Heavy-duty rubber pads snap onto your trailer's Level Up leveling jacks from Lippert to make leveling faster and easier
- Eliminates the need to crawl under your trailer to position plastic pads or wood blocks
- Increased surface area of your leveling jack's feet provides added support for your trailer
- Prevents sinking into soft ground, unlike smaller metal feet
- Durable, heavy-duty rubber is made from recycled tires
- Grips uneven terrain and prevents metal feet from rusting or bending
- Serves as a cushion so metal feet won't crack or chip your driveway
- Helps dampen vibration from inside motorhome that could cause shifting
- Built-in drains release moisture to prevent jack feet from corroding
- Simple, one-time installation
- Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place
- No need to remove and replace pads or carry other jack pads or blocks around with you
- Made in USA
Specs:
- Application: Travel trailers with Lippert Level Up leveling jacks with 5-3/4" - 6" square jack feet
- Diameter: 8-1/2"
- Height: 2"
- Weight: 2.8 lbs per pad
- Includes 4 pads
- 2-Year limited warranty
Simple, One-Time Installation
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
XTRSQSP4 Snap Pad Extra Square 6 Jack Pads for Travel Trailers with Lippert Level Up - 5-3/4" - 6" Square Jack Foot - Qty 4
Installation Details
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet - Qty 4 - SN99FR
Average Customer Rating: 4.8 out of 5 stars (3749 Customer Reviews)
Designed for travel trailers with Lippert Level Up jacks with 5-3/4" to 6" square jack feet. Sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Includes 4 pads.by: Gandalf the White07/17/2023
These sat in my garage for several days u til I had some spare time to pop these on. The average daily temp here in my part of The Republic of Texas was about 106..with heat indices of between 114 and 118. I don't know if the heat helped but with a small application of dawn dishsoap, these took all of 5 minutes to install. They're on there to stay I'm certain. Thanks everyone at etrailer!
by: Joseph10/25/2023
Great addition! Adds about and inch of height and a larger footprint to the stabilizers. Rubber is extremely stiff and fits tightly over footpads. Plus, I like the look.
by: Rick03/22/2023
I received my snap pads today for my travel trailer. etrailer shipped very fast. I installed them on my travel trailer in very little time at all. Jack feet went right into pads without any trouble at all. I put Dawn dish soap around top of each one like was suggested. Very pleased. Now ready to try out at campsites.
by: Elliott04/09/2023
It is a toss up as to what was easier; ordering or installing this product. The ordering was seamless and the customer service provided to advising me of the shipping status and delivery was above par. The instructions were very straight forward ( thank you for the suggestion of dish soap as a lubricant) and they attached very easily. I tested them as soon as I attached and they were solid! I haven’t even taken them out on the road yet, but I am confident to give five stars because of the high quality in the design. No more climbing underneath to set the pads in place along with walking back and fourth to the switch to make sure the pads are in the right place. For some reason these new pads also removed a “thud” sound whenever I extended the stabilizers. Thanks for a great product and great service etrailer!!!
by: PDX Camper08/31/2023
When stabilizer jacks are retracted, one of the pads comes off on one edge.
by: Tom09/09/2022
Perfect shoes for my 2022 Salem Hemisphere with Lippert PSX1 stabilizers. Installation was a snap (many snaps actually)!
by: Karl 10/20/2022
Really fast a d easy install!
by: Thomas 03/22/2023
These pads are a must to have as it takes all of the dirty work out of setting up my travel trailer! No longer do I have to crawl on my knees to out leveling pads under my electric stabilizers. Installation was a snap too!
by: John 03/28/2023
After installing these on my travel trailer we traveled over 10,000 miles. There were no issues and they worked as expected.
by: Vincent04/17/2022
These were a perfect fit. Definitely would recommend snap pads.
by: Walt 11/03/2023
Work well install very easily
by: Brad 01/21/2023
Bought these to make trailer set up easier. These snap pads fit perfectly on our stabilizers. Thank you etrailer.
by: Anthony 07/28/2023
I really like these.I never think about having to put something down when I set up.
by: Roger 11/02/2022
These pads were simple to install and have performed as expected. We are very apprecative every time we set up and don't have to place and line up the little yellow pastic pads we did previously. I was concerned that they would not stay on the feet of the stabalizers, but they have with no issues.
I only wish I could have found them sooner.
by: Derek02/16/2022
Perfect fit, adding a little bit of soap on the pads before you install them helps them slip right on. Quick deliveries as well!!! Will use this site more often!!!!
Derek
2/16/2023
Product still works great even a hear later! If and when i get a 5th wheel I plan on purchasing them again 100 worth it and gives it a bit morw stabilty as well.....BUY THEM
by: Ryan01/21/2022
Great products and always shipped perfectly! Easy install and a much needed upgrade for our stabilizers.
by: Orkelys06/14/2023
Didn't fit
by: Robert 09/25/2022
It’s now been several months since this purchase giving me time to use these Jack pads! They work exceptionally! Would definitely buy them again!
by: Ray 06/12/2023
Great products and outstanding service!
by: Rhonda 10/11/2022
Very easy to install. Happy that we won't have to guess where to put the pads down as the jacks are descending
by: Andy 05/30/2023
Looks good haven't tried them yet
by: Joseph 03/22/2023
It fit perfectly and installed easily. Looks to be very durable and heavy duty. I am very happy with the product. I used a little dish soap as suggested and had no issues.
by: Johnny 08/04/2022
My pads measured 5 3/4 so I ordered the square 6. Fit was ok but Ive read sveeral reviews about them fallin off. I used 2 countersink screws with lock nuts for precaution. I think they are a great idea, just alittle pricy
by: Craig05/19/2022
Received the pads and installed. My jacks measured 5.75 and the pads were a very snug fit so I’m not sure why another reviewer said he lost multiple pads. They provide a larger footprint and more importantly a softer landing surface for gravel. I believe I will be totally satisfied. I am going to put a tie strap around the attachment bolt and pad just in case they should get jarred loose during travel. I dont believe that to be the case.
25
3561
Show More Reviews
See what our Experts say about this SnapPad RV Jack Pads
- What SnapPad Will Fit My Lippert 6 Inch Square Stabilizer FeetYes, the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet - Qty 4 # SN99FR will work for you. Install temp is not a huge issue, takes a few minutes per pad. The pads will maintain structural integrity down to -40 degrees and up to 120F degrees. It is suggested that install will be easier if temps are over 50 degrees. SnapPad installation should be performed on a level or near level surface preferably a hard surface like concrete or asphalt. Wheel chocks should...
view full answer... - Installation of SnapPad XTRA Jack Pads for Lippert Leveling SystemsYes, the SnapPad XTRA Jack Pads for Lippert Leveling Systems, # SN99FR do not require a tremendous amount of force to be seated. You will be okay. Happy Camping!
view full answer... - Can The SnapPad XTRA Jack Pads for Lippert Leveling Systems Handle 36,000 lb. Motorhome Yes, the SnapPad XTRA Jack Pads for Lippert Leveling Systems, # SN99FR has been tested to withstand in excess of 20,000 lbs. per pad. The weight of your motorhome will be distributed among multiple points with leveling system, so you will never exceed the weight rating for one pad.
view full answer... - Do SnapPad XTRA Jack Pads Fit Square 5-3/4" Jack FeetI checked with the manufacturer, SnapPad, and verified the XTRA pads you asked about do fit 5-3/4" jack feet; so you can use the following: - SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet # SN99FR The SnapPad # SN99FR are for 5-3/4" to 6" square pads so they will work for you.
view full answer... - SnapPad Feet for BAL Power C Jack on 2022 Winnebago Micro Minnie w/ 5-1/2 Inch Square Jack FeetThe # SN99FR SnapPads you'd looked at would be too large for the feet on your jacks, but we do offer a size that would work for you. The # SN39FR is specifically designed for for 5-1/2 inch BAL Power C jacks, so that's what I'd recommend using. I've confirmed this with my SnapPad representative, just to be sure.
view full answer... - Pad For Stabilizer Jack With 5-3/4" FeetThe SnapPads # SN39FR that you referred to are 5-1/2" in size and your metal pads are 5-3/4", so your feet are too big for the pads. You will need the # SN99FR pads designed for metal feet 5-3/4" to 6". Please measure all 4 feet before ordering. It is not unusual for front and back feet to be different sizes.
view full answer... - Correct SnapPads for a 2022 Newmar Bay Star Motorhome W/ 10 Octagonal FeetYes, the 10" SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR are going to be the correct ones for your 2022 Newmar Bay Star Motorhome. These SnapPads measure 13-1/4" long x 13-1/4" wide x 2-1/4" tall, will work with 10" octagonal shaped feet and is made in the USA.
view full answer... - SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ Close to 6" Square Jack FeetWe do have the correct SnapPad's that you need but the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 5-1/2" Square Jack Feet # SN68FR would not be the correct ones if you have 6" feet. The correct SnapPads would be the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet # SN99FR. The SnapPad # SN99FR are for 5-3/4" to 6" square pads so they will work for your feet measuring close 6".
view full answer... - SnapPads For a 2019 Heartland Mallard M32 Travel Trailer With Lippert Stabilizer JacksI was able to narrow down your 2019 Heartland Mallard M32 to having the Lippert stabilizer jacks. They will be either the 5-1/2" to 5-5/8" Pads # SN68FR or the 5-3/4" to 6" Pads # SN99FR. You will need to measure your stabilizer feet to find the exact pads.
view full answer... - SnapPads For Lippert Powered Stabilizer Jacks With 6 Square FeetThe SnapPad XTRA Square # SN99FR is the correct set of snap pads to fit the 6" Foot # LC157584 on the Lippert High-Speed Power Stabilizer Jack. This kit includes 4 pads or you can get them Individually # SN77FR if you only need one set or one get damaged.
view full answer... - Recommended SnapPads For A Lippert PSX1 Electric Stabilizing Jack I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack # LC298707 and found that the 6" square SnapPads were a fit. If your 2022 Forest River Vibe travel trailer only has one # LC298707 then you can order two of the single quantity # SN77FR, and if it has two sets of stabilizers then you can use the # SN99FR to get four SnapPads.
view full answer... - Recommended SnapPads For A Lippert PSX1 Stabilizer JackI actually just went and test-fit SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack # LC298707 yesterday and discovered that the # SN99FR (4-pack) and # SN77FR (1-pack) are a compatible fit.
view full answer... - Recommended SnapPad Jack Pads for Equalizer Leveling System w 10" Octagon Jack FeetI recommend the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet, # SN76FR a qty of 4.
view full answer... - What Jack Stand Pads will Work with My 4-Inch Square Trailer Jack Feet?I have a pad solution for you. I went ahead and called my contact at SnapPad, and she confirmed that the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet # SN99FR will not work for your 4-inch square feet. There is unfortunately no customized pad (with raised ridges) that will work safely. With that being said, the best alternative is 2 pairs of the StayPut Jack Stand Pad w/ Handle - 13-7/8" x 11-7/8" # A10-0924. This pad is a universal-type pad that does not...
view full answer... - Recommended SnapPad HiWay Plus Jack Pads for 2014 Allegro Yes, we have the SnapPad HiWay Plus Jack Pads for HWH Leveling Systems w/ 8" Round and 10" Round Jack Feet, # SP34FR64. This fits select models of the Tiffin Allegro Red and Phaeton with HWH leveling systems.
view full answer... - JT's Strong Arm Compatibility With Snap Pads On Electric Travel Trailer StabilizersYes, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 can be used on electric stabilizers. The Electric Stabilizer Jack Pad Adapter # LC314597 will allow you to attach the Strong Arms to the jack pad. These adapters can be either bolted on or welded on to stabilizers. They will not interfere with the SnapPad XTRA Jack Pads # SN99FR or other pads that you have and are specific to your travel trailers stabilizers.
view full answer...
Do you have a question about this RV Jack Pad?
Info for this part was:
Expert Research:
Mike L
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Carrie F
Written by:
Mike S
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Karl
10/21/2023
Really great having the jack pads. Love them!