Arrives before Christmas 
This adapter connects 2 pipes that move waste outside of your RV or motor home. The 1-7/8" hub slides onto a sewer system pipe, and the male NPT end threads onto a sewer system pipe.
Features:
Specs:
This adapter is a DWV (drain, waste, vent) fitting that is part of your motor home's waste management system.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Valterra DWV Adapter for your RV sewer system. This is a sturdy ABS plastic adapter that's gonna add threaded connection to a 1 1/2 inch sewer pipe, so that two 1 1/2 inch pipes can be connected to move waste outside of your RV or motorhome. This does have the 1 1/2 inch hub that's gonna slide onto your sewer system pipe. It is recommended that you use some ABS solvent cement to make sure that that connection is gonna be nice and secure, that is sold separately, but you can find some here at etrailer.com using that part number that you see on the screen there. And then we are going to have our 1 1/2 inch MPT end that's going to thread onto our sewer system pipe there, so it is going to add that threading onto your pipe.
That 1 1/2 inch, of course, is gonna be the internal diameter of your pipe, so once you have this put in place, your 1 1/2 inch internal diameter pipe is going to have that same 1 1/2 inch MPT thread, so everything's gonna flow properly, you're not gonna have to worry about it getting bound up or restricted as it flows through. This does meet the International Association of Plumbing and Mechanical Officials standards that you see on the screen there, so you can trust it is gonna do a good job, hold up well, and meet the specifications needed. Just to give you a few measurements, you can see this is going to be right at 1 3/4 approximately tall, our overall diameter is about 2 1/4 of an inch, our hub is that same external diameter, and then our internal diameter is gonna be right about 1 7/8 of an inch. Our male MPT threading is going to have an external diameter of 1 7/8 of an inch, and then the internal is gonna be that inch and a half. So everything's gonna work properly to make sure that your sewer pipe can be connected using those threads.
So if you are needing to add threading onto your inch and a quarter sewer pipe for your connection for your sewer, this is gonna be exactly what you need. That completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching..
Average Customer Rating: 4.9 out of 5 stars (8 Customer Reviews)
This adapter connects 2 pipes that move waste outside of your RV or motor home. The 1-7/8" hub slides onto a sewer system pipe, and the male NPT end threads onto a sewer system pipe.
Product installed as anticipated. One year later, it is as good as new after 8 weeks of camping and about 5,000 miles of travel. etrailer has proven to be a provider of quality solutions.
These worked great for our project. Arrived timely also.
All items as described.
A few days late getting here but over Christmas holiday. Probably a UPS problem. Great price.
Good product..fast shipping...Very good web site...Got just what I need..
worked great, thanks!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.