Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
With a leakproof camlock fitting and an easy-to-use nozzle with a shut-off valve, this extra-heavy-duty hose will make emptying your RV's holding tanks fast and easy. Camlock installs over your RV's existing waste valve.
Features:
Specs:
The Waste Master from Lippert makes emptying your RV's holding tanks as easy as possible. The camlock fitting provides a tight, leakproof connection at your RV. An easy-to-use nozzle is comfortable to hold and lets you start and stop the flow of waste when you're at the sewer inlet. Finally, an extra-heavy-duty hose resists wear and damage while staying flexible. It's all designed to keep the waste contained until it goes down the drain.
The Waste Master prevents any waste from escaping from your RV sewer setup. The trick is the leakproof camlock fitting. Unlike standard bayonet-and-lug fittings that can potentially leak, the camlock fitting that installs on your RV totally surrounds the Waste Master hose. When paired with the built-in seal, this makes for a leakproof connection.
The camlock fitting, which replaces your RV's existing lug fitting, has 2 locking arms that prevent the hose from disconnecting from your RV. The arms also press against the fitting to create an even tighter seal, delivering even greater leak protection. After the hose is coupled inside the fitting, simply press down on each arm until they're both flush with the side of the outlet.
Upgrading your RV's existing bayonet-and-lug-style sewer outlet to the Waste Master's camlock fitting is simple. First, remove the cap from your existing fitting. Use a hacksaw to cut off the exterior bayonet tabs and then smooth the surface with sandpaper. Next, glue the camlock fitting onto your RV's outlet using ABS glue.
Easy-to-Use Nozzle with Built-In Shutoff
The permanently attached nozzle is designed to expel waste without making a mess. The handle's molded grip makes the nozzle - and hose - easy to carry, while also keeping your hands safely away from unsanitary drains. The 90-degree angle allows the nozzle to fit easily inside the drain pipe without sharply bending the hose. Plus, the contoured rubber gasket on the nozzle creates an airtight seal with sewer inlets of many different sizes, keeping nasty odors from escaping.
A clear window in the nozzle lets you see when the water in the hose runs clear, so you don't need any risky guesswork to be sure your tank is completely empty.
The nozzle also has a shutoff valve, so you can start or stop the flow of waste at any time. Simply pull the built-in lever up to open the valve, and push it down to close. "Open" and "closed" are clearly marked on the side of the nozzle to avoid any confusion. And because you can control the flow at the nozzle, you don't need an extra person to open or close the valve back at the RV while you're at the dump station.
Durable, Stay-Clean Hose
Most RV sewer hoses have coils running along the inside where waste can get trapped, causing nasty odors and making the hose difficult to clean. But the Waste Master's inside is smooth, allowing waste to flow freely through the hose.
Also, the hose's durable and flexible TPV construction is resistant to crushing, abrasions, punctures, and UV rays, so it'll give you years of reliable use on your RV trips. Finally, the hose's large, strong end cuffs are securely bonded to prevent leaks between the hose body and the fittings.
Average Customer Rating: 4.8 out of 5 stars (90 Customer Reviews)
With a leakproof camlock fitting and an easy-to-use nozzle with a shut-off valve, this extra-heavy-duty hose will make emptying your RV's holding tanks fast and easy. Camlock installs over your RV's existing waste valve.Haven't used it yet but appears to be a quality product.
Nice quality product have not installed on my camper yet but I'm sure there will work just fine
Works great. Makes dumping my motorhome tanks very easy.
Have had one of these cam type sewer hose before and liked it better than bayonet type. Strong outer shell is excellent.
This the best slinky out there.
ETrailer service was outstanding. They are my #1 go to site now.
Carol C was very knowledgeable about the correct tow package for my application. Placed order and it arrived a day earlier than promised. Got follow up email to confirm that everything was as expected. Great product and service.
This is the best sewer hose for camping. It does not develop pin holes easily like some.Coils back up and stays coiled. It's not going to uncool easily. In addition it attaches to you RV with a solid seal plug which is nice if you have arthritis. No lining up and twisting on to bayonet pins. If you have the bayonets, you will have to cut and sand them. Easy to do and well worth it. I had this on my previous motorhome and was surprised and excited that I could have it again. With the solid plug and hose, I thought it was designed for professional sewer pumpers ie: septic tank/ porti-johns. The other end seals nicely into the campground pipe, has a clear ring for visibility. The campground end also has a shut valve. After draining your tanks, disconnect at camper, put the red cap on the hose. Put the plug in the drain and clamp it. Shrink the hose towards the campground end. When compacted, close the valve. The closed pipe assists in reducing any odor and also reduces its ability to uncoil.
This is by far the best RV waste hose I have found on the market.
The head/valve assembly design is a little bulky (storage wise) but works very well.
I installed an additional block valve at the attachment point on the side of the coach along with the easy turn attachment. No more reaching underneath in awkward positions to pull the valve handle.
The payoff is no more nasty leakage at the attachment point. (See photo)
Happy drip free camping!
I had been looking for a hi quality drain hose when I saw this one. I ordered it and it exceeds my expectations. My problem with the standard slinky hose was . I would remove the cap on the drain valve, always some liquid would fall out of the cap on my gloves. Connect the hose put the ell in the hole.when I pull the slide valve the initial surge could make the hose jump causing a spill I couldn't be at both ends of the hose at the same time. With this new hose the camlock fitting is easy to open without getting wet. The valve at the output end allows me to controll the flow no more spills. The installation was easy cut off the pins on the bayonet connection sand and file for a good ABS joint and glue it on. I made up a camlock X bayonet adapter so I can use my macerator pump when I need to. I recommend this product.
I chose the Lippert Waste Master because of my familiarity with CAMlock fittings. I like the ease and perception that they create a tighter more reliable seal. I am pleased with hose, the fittings, and the ability to adapt them to the bayonet style of fitting. It has proven to be a very versatile system indeed.
Was easy to connect and disconnect.
The hose works great and it obviously a well manufactured product. I had to install the new connector to my 2001 Airstream, a simple thing to do, and since then it’s worked flawlessly. I like the connector, easy to close but very secure. The valve at the other end and the clear section make it easy to see when the system is adequately flushed out. Well work the price.
This is an awesome system! Installation was straight forward and easy. I simply cut off the four locking posts on my rig, filed them flat to the pipe, cleaned with PVC solvent and glued on with ABS Cement. I wanted to cut off the old connector and replace with new black pipe, but I would of had to order the pipe at the cost of $56. It just wasn’t worth it.
Ron
6/22/2020
Great!
been buying from etrailer for 3 years
John
6/5/2023
1 year update..the Wastemaster system has continued to function flawlessly..no leaks and no accidents of any kind. Minimal odors which is a vast improvement over the OEM system
I've bought a lot of sewer hoses since 1976 and this is the best ever! I did NOT cut the nubs from my sewer, I cut them from an added an extra valve and cut them from that for 2 reasons, 1 is the Montana stays as it came from the factory and 2 it protrudes an extra 5 - 6 inches. The added length remains under the 5th but requires less reach and the extra valve is insurance against failure of any of the 2 black and 2 gray valves! This hose is built to last!
Due to the end nozzle being unable to fit in bumpers, but fewer bumpers on new campers anyway. However, the nozzle shut off and rear cap keeps 100% of any liquid in the hose! I keep it in a tub in the battery compartment, it is not very big when closed! I'll never go back!
I converted my RV to 100% using the camlock system by permanently installing the camlock fittings on my sewer outlets. It is MUCH MUCH better than any of the leaky, fragile, difficult to connect bayonet fittings I've used before. This hose is very stout, but the major improvement is the camlock fittings. Once you use those, you'll never want to deal with the bayonet fittings again regardless of the manufacturer.
These last a full 16 months in the dry Arizona desert. Not bad at all. If I could figure out a way to keep it covered through the wind storms it would last much longer. I love having the valve built right into the hose. The only downside is that the rubber seal and short piece of pipe that attach to the sewer pipe at the camp site tend to separate from the valve when removing the valve. I had to use pliers to remove the piece of pipe and the rubber seal.
Ssonnentag
7/17/2019
12 months of use and still going.
While the system is high quality, the seal at the outlet is JUST enough to prevent a leak during light use. It will not hold if you intend to use a maceration pump where the waste backs up a bit as it's being processed through the pump and leaks heavily. I've replaced the outlet and gasket at my expense only to get the same results. I called Lippert as well as the manufacturer on this who wouldn't help. So, in the end, for the 90% of the time I am at full hookup sites, it's fine. For the 10% where I'm on the road overnight or dry camping and want to dump at home with my macerator, it leaks.
To date, have not had the opportunity to use this product. from careful inspection, of the unit, it appears to be made of high quality materials. I especially like the cam lock system, employed by Waste Master. More than once, I have had the conventional system separate, allowing waste to escape onto the ground. Another plus, with the Waste Master, is the lack of ribs, on the interior of the hose. Another plus, hose length is double that of standard sewer hoses, and folds down to 5-ft length. A no brainer.
Excellent product. Works functionally great, beats the dog eared drain connectors by far. It is strong plumbing material and see through valve is nice to verify clean water flow after flushing tank. Stores nicely. Will continue to use Waste Master on future RVs.
WASTE MASTER sewage hose
Easy installation of waste water hookup point. Hose is effortless to hook up. Solid attachment. Flow control easy to handle. DW and I go to some campground every month so this hose has received its due in the first year of use. This piece of kit is extremely well made and shows NO wear whatsoever. Handles what ever you can give it! and then some.
This is by far the best sewer hose we have ever used. With a potential 20' it has yet to come up short at any campsite. The design, smooth inside, allows for quick and easy clean up prior to storage. Once you have mounted the firehose style connection to your sewer discharge you will never look back. Easy to install.
Waste Master RV Sewer hose with can lock fittings is a superior product to the old bayonet style sewer hoses. We had one on our Redwood 5th wheel and we're surprised to find the bayonet style on our new Tiffin motor home. Problem solved when we ordered the Waste Master Sewer hose from ETRAILER. Great prices, fast shipping and a happy customer gets ETRAILER.
Have received the new Waste Master Hose w/Camlock, Nozzle, and endcap. Reviewed this product from an article in Family Motor Coach Association magazine as well as installation procedures via YouTube. Have yet to install, however when the weather breaks I plan the installation. Thank you etrailer.
Just received product. Looks as expected. The only issue is that there is no installation instructions (connection to RV must be permanently installed and glued on) and they are quite difficult to find on the web as well.
Haven’t use the product yet.
Mike L.
9/27/2018
If you scroll up on this page, you can see install details and photos.
Do you have a question about this RV Sewer Hose?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bruce W.
5/11/2021
Great, I’m still very happy with it.