bing tracking image
  1. RV Skid Wheels
  2. Ultra-Fab Products
  3. Bolt-On
  4. Hitch Mount
Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches

Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches

Item # UF48-979020
lowest price pledge
Retail:$73.29
Our Price: $39.89
You Save: 46%
RV Skid Wheels
Orders above $99 qualify for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
Ultra-Fab Products Bolt-On RV Skid Wheels - UF48-979020
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately. Lowest Prices for the best rv skid wheels from Ultra-Fab Products. Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches part number UF48-979020 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (90)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Ultra-Fab Products RV Skid Wheels - UF48-979020

  • Bolt-On
  • Hitch Mount
  • Ultra-Fab Products

Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately.


Features:

  • Unique roller mounts under your RV's rear hitch receiver opening to help prevent damage to your hitch that can occur from tail dragging and digging in while backing up
    • Attaches with pin and clip or hitch lock (sold separately)
    • Can be used at the same time as ball mount or other hitch-mounted accessories
  • Heavy-duty steel construction is extra durable


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Pin hole diameter: 5/8"
  • 1-Year warranty


Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.



48-979020 UltraFab Solid Steel Roller Hitch Protector





Video of Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ultra-Fab Products Skid Wheels - Hitch Mount - UF48-979020 Review

Today, we're going to review part number UF48-979020. This is the ultra fab steel roller for RVs with two-inch trailer hitches. This roller will attach beneath your hitch receiver opening on your motor home travel trailer or fifth wheel and will help prevent damage to your trailer hitch. The pinning clip that goes in here unto your hitch is sold separately. This unique roller mount will mount under the rear hitch receiver opening. It will help prevent damage to your hitch that can occur from tail-dragging and digging in while back up.

This attaches with a pin and a clip or a hitch lock which we sell separately. This can also be used at the same time as using a ball mount or other hitch-mounted accessories in your hitch.It is made of a heavy duty steal construction and is extra durable. Again, this fits a two-inch trailer hitch receiver. The hitch pin and clipI have an example herethat is sold separately is a 5/8-inch diameter pin that is used with this. It does come with a one-year warranty.

Basically, this would just be screwed on and you have your roller right here. Actually, on one end, right here, there is a an actual zerk fitting that you can actually grease. Put your grease gun, too, and fill this with grease to help the roller out by lubricating it in the inside. Basically, I just want to show you how it installs on the hitch receiver. I got an example here of what your two-inch hitch receiver end would look like.

Basically, you would just place it underneath, line the holes up. Just take the pin and grip the part. Just put it underneath to your hitch receiver, line the holes up, run the pin or the hitch lock, whichever you prefer to use, through there. Put the clip in. As you can see, that would hold it into place and that actually rotates.

When your hitch receiver gets so low to the ground, it will actually roll with the vehicle so that it doesn't dig in or drag. That should do it for our review on part number UF48-9798020.


Customer Reviews

Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches - UF48-979020

Average Customer Rating:  4.7 out of 5 stars   (90 Customer Reviews)

Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately.

- UF48-979020
by:

The product worked Great. I installed it on my receiver hitch of my Nissan Frontier to keep the backend from dragging when I load it on the back of my Hay Trailer as I move to another Hay Field. I may not be using it as intended. Haha. It's built Tuff and can handle it.



- UF48-979020
by:

I used this to prevent the extended tow bar (which has an Insta-brake unit installed} from being damaged when encountering sharp differences at road to driveway transitions. It seems to work well as I have not encountered any damage when I know I have dragged the tow bar.



- UF48-979020
by:

After researching many alternatives to protect from minor scraping on the hitch extender I installed on my Jayco Greyhawk Class C motorhome, The wheel protects the safety cables from scraping while I’m four-wheels-down towing my Lincoln MkT. I selected this Ultra-Fab Skid Wheel, and so far I’m very satisfied. It’s doing what I need. Of course, the more useful rating would come after about five years in service. Etrailer has been fair and reliable to me.



- UF48-979020
by:

Had purchased the larger urethane skid wheels which broke the first time they hit the ground. Really wasn't expecting them to last on a 38' Class A, my driveway transition is steep and irregular surface at street. These steel rollers have held up great, even when I forget and hit the transition too fast. I added a third steel roller to the bottom of the receiver hitch also. All three have held up great.



- UF48-979020
by:

Bought this for the low riding and extra long hitch of my 2015 Tiffin Allegro Diesel Pusher Motorhome with air leveling. This motorhome rides approximately 5 1/2 inches off the ground when in travel mode. Of course, you can "Raise" the coach up with the HWH air system, but in steep incline situations, even that is not enough. First, this roller unit will come shipped to you "dry", meaning you need to fill the zerk on the bolt that extends through the wheel with some good quality grease to assist this roller turning smoothly. Be careful not to over-grease as the grease will extrude out of the roller assembly itself - it is only blocked by the nylon/plastic washer assemblies between the roller and the U-shaped mount assembly. Second, you need to make sure you have an extended length hitch pin (at least 3 1/2 inches) as this roller assembly mounts/fastens on the outside of the hitch assembly and the "ears" of the assembly are slightly flared out even more than the width of the hitch itself. The extended length hitch pins are readily available as they are now used in most newer Toyota and Ford pickups (among other models) that have a wider hitch assembly. The metal of this roller surface is pretty soft, so any type of rolling on concrete will put some dimples or marks in the wheel surface; the few times it has made contact with the concrete aggregate surface of my sloped driveway since install show that to be the case. It appears to work as advertised and only time will tell how it holds up. You hope you don't need to have this rolling on a surface but it sure beats dragging your hitch on the surface. Took off one star as the metal of the roller seems softer than it should be for this application especially when you consider there is a 26,000 pound RV riding on top of the roller,



- UF48-979020
by:

Prompt shipping, and product very good quality and was exactly as it was described and pictured. FYI, I had to fabricate mount because of my application. Be sure to check if your safety chain hooks are not in the way of mounting. My safety chain hooks on the bottom side of the reciever channel, which prevents mounting in that location. A trip to hardware store and under $10 sheet metal took care of this. Works great. Took a picture to give you a peek but having trouble downloading.



- UF48-979020
by:

It's just what I needed. You need to show the inside diameter so that me know it will slide on.



- UF48-979020
by:

I have a 43 foot Jayco dual axle fifth wheel with a facory installed trailer hitch on the rear. Rear end drags on my driveway and most moderate slopes. This roller has prevented the hitch from ruining my driveway and damaging the trailer. Recommend this roller.



- UF48-979020
by:

multi use. I built a motorcycle rack for the back of the RV that has a receiver on each frame rail to hold and support. I have added a drag wheel to each receiver as well as the back of the motorcycle rack. It holds a Honda 750 Nighthawk and has held up very well.



- UF48-979020
by:

While not as heavy duty as the [link] That I paired this with, it is still heavy duty enough to do the job of keeping me from grinding the bottom off of my cargo hitch. The fit is a little lose allowing it to rattle around and move a bit but no big deal as it must be made to allow for variances in hitch dimensions.



- UF48-979020
by:

So far these have held up well. I have used them on the frame rails as well as a motorcycle rack I have that goes into the hitch receiver. I carry a 750 Honda on the rack so it is holding a load.



- UF48-979020
by:

I ordered this skid roller to help from dragging my tow bar. I have not used it as of yet, but if I remember right, it was about 1/4 the price of Blue Ox's version and appears to be built strong. Make sure you have a long enough hitch pin/lock.


Comments
Product is working fine, Glad I have it on to preve3nt damage to toe bar.
John S - 09/09/2016



- UF48-979020
by:

Excellent Service. Very easy to install. Product worked as expected. Helped with tail dragging issue.



- UF48-979020
by:

The skid wheel works but I guess I put too much weight on it or some dirt got inside the bearings as it stopped turning after the first few uses. It does still do what I need which is protect my trailer plug. I was surprised to get the email from etrailer a year later to see if I was happy with it. Overall the product works and the etrailer is easy to deal with.



- UF48-979020
by:

Great engineering and construction. Fast delivery and good service. Just what i needed, and what every motor home owner needs that has dragged his hitch and gritted his teeth! Thank you etrailer. Now I just need to find an extra long locking pin.



- UF48-979020
by:

What a great experience. I called and got all my questions answered before ordering. The roller ball, hitch extender and two hitch pins arrived in just a few days via low-cost ground shipping. Everything was exactly what I expected. I will definitely order from this company in the future.



- UF48-979020
by:

Had to be altered to fit the hitch on by motorhome. It would not clear the rear support brackets of my hitch. Had to notch out about 1/4 inch at rear lower corners of the so it would fit and I could insert the pin in the hole.



- UF48-979020
by:

Turns out I went a different direction with this rollers, no pun intended. I actually am using a rolling jack instead whenever I need a third point of contact. But the roller is sturdy and I'm sure it would have worked just fine.



- UF48-979020
by:

This is a great product ! I have a 23 foot, 2004 Gulf Stream B-Touring Cruiser. It is a Class C motor home with LT 225/75R16 tires. The trailer hitch is very close to the ground and often scrapes the ground in low spots, even when it does not have the tow dolly attached. Now, when a low spot is encountered, the steel roller contacts the ground, rolls forward, so the bottom of the actual hitch does not come in contact with the ground. No more gouges in my drive way ! I recommend this product to all owners of "low" ground scraping trailer hitches.



- UF48-979020
by:

Great communication to customers



- UF48-979020
by:

i have an rv when backing into my driveway my hitch hits, digging into my blacktop.with this hitch roller this will hit first, allowing the hitch to clear,good product good seller! thanks.



- UF48-979020
by:

I have a 2009 Winnebago Journey and have an issue with the tow hitch bending and breaking the mud flap support bar everytime I leave my driveway or the back end scraps. I bought the pair of hitch mounted skid rollers but after getting them out of the box and installing one, I found that they interfered with the mud flap. After some discussion with Nicole and Carrie Ann at ETrailer, I returned the roller a and bought the hitch mounted single roller. It installs very easily and so far has performed as expected. The customer service reps at E-Trailer were very professional and helpful during this process.



- UF48-979020
by:

I installed the Ultra Fab Steel Roller for RV's on my motorhome hitch. This product works exactly as advertised. The grease fitting is a great asset.


Comments
Its been a year and this product is still as good as new
Tony - 07/01/2016



- UF48-979020
by:

Excellent product. Was several times our rescue on steep driveways. Very simple solution. Easy install - and remove if you wish.


Comments
Excellent, sturdy, easy install, effective.
Jorn - 08/14/2019



- UF48-979020
by:

The hitch roller is very sturdy and prevents our motor home hitch from dragging on the pavement. Excellent service from etrailer Thank you


25
90
Show More Reviews

Ask the Experts about this Ultra-Fab Products RV Skid Wheels



  • Highest Ground Clearance Class III Trailer Hitch Receiver for 2021 Honda Odyssey
    The Class III hitch with the best ground clearance for a 5th generation Honda Odyssey like your 2021 model would be the Draw-Tite # 76170 which would provide about 12 inches of ground clearance under the receiver tube. This hitch would also be the least visible, and would have the crossbar tucked up behind the bumper/fascia. This adds to the installation difficulty but really helps provide additional ground clearance (1-1/2 inches more clearance than the # e98855 that you'd looked at). In...
    view full answer...
  • How to Prevent Limited Ground Clearance on a 2017 Toyota Sienna
    I have two options for the limited ground clearance you have on your 2017 Toyota Sienna. The first option as you mentioned would be to install a different trailer hitch. The trailer hitch we have for your Sienna that will offer the most ground clearance is the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7255 which from the ground to the top of the inside edge of the receiver tube is 13-1/4". The other option you have will prevent the hitch from scraping the ground but it will not...
    view full answer...
  • Recommended Solution for Hitch Dragging Over Speed Bumps on 2016 Toyota Sienna
    I have a solution for you, but the Timbren # TTORSEN04 are not going to significantly lift the rear end of your vehicle and really aren't intended for this purpose. These are designed for when you're towing a camper that has a heavier tongue weight causing sag on the rear end when it's being towed and none of the available suspension enhancements for your 2016 Toyota Sienna will provide a real significant lift you're seeking. With that said, you can use the Ultra Fab # UF48-979020 skid...
    view full answer...
  • Will the Air Helper Springs for Coil Springs Raise the Ride Height of a Vehicle
    The Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL60732 which is a confirmed fit for your 2016 Toyota Sienna will not raise the ride height of your vehicle. It will however prevent the rear of the vehicle from sagging while attached to a trailer which will therefore give you additional ground clearance. If you have a 2" trailer hitch receiver on your Sienna then you can use the Ultra-Fab Steel Roller part # UF48-979020 to prevent the receiver tube from scraping on...
    view full answer...
  • How to Prevent the Trailer Hitch from Scraping the Ground on a 2015 Subaru Legacy
    I do have an option for you but the Curt Trailer Hitch Receiver part # 13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This measurement is taken from the ground to the top of the receiver tube opening on the hitch. Instead of replacing your trailer hitch, I recommend installing a skid wheel like the Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches part # UF48-979020. The...
    view full answer...
  • Is the Roadmaster Rollaway Trailer Hitch Protector Heavy Duty Enough for Use on a 37 Ft Motor Home
    Yes, the Rollaway Hitch Protector, # RM-050, should be plenty heavy enough to work on your 37 foot motorhome and keep the hitch from dragging when you back into your driveway, as long as the dip you have is not so deep that it is bending the hitch receiver or side plates. If your dip is so extreme that the hitch is bending, this type of item would only make the situation worse. To use the Rollaway Hitch Protector you will need to make sure that the support bar, see short video, is not...
    view full answer...
  • Hitch for 2020 Chrysler Pacifica With Most Ground Clearance
    None of the hitches we offer would install through the bumper like the OEM hitch. The Class III hitch we offer with the largest amount of ground clearance for the Hybrid model would be the Curt # C29UR, which would offer about 10-1/2 inches of clearance under the receiver tube. This might be a bit less ground clearance than the OEM hitch, but the cost of the hitch is considerably less than the OEM alternative. Also, it's pretty typical that OEM hitches that pass through the fascia will...
    view full answer...
  • Recommendations For Skid Rollers on 39 Foot Forest River 5th Wheel
    I would recommend the Ultra-Fab Skid Wheels, part # UF48-979013, for your 39 foot Forest River 5th Wheel. These larger 6-inch diameter wheels will bolt onto the frame of your 5th Wheel to help prevent the tail from dragging. The longer the RV/5th Wheel, and the greater the distance between the rear of the RV/5th Wheel and the back axle, the greater the forces the skid wheels will have to deal with. This is why the larger, stronger skid wheel like those used on the Ultra-Fab # UF48-979013...
    view full answer...
  • Is There Benefit to Using Ultra-Fab Steel Roller and Roadmaster Hitch Protector at the Same Time
    I went out to our warehouse to grab a couple measurements on the Ultra-Fab Steel Roller, # UF48-979020. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to the edge of the bracket. You will need to determine if the two plates on your hitch for the chains will interfere with this. I also took a measurement from the center of the hitch pin hole to the bottom of the roller. This measurement came in at 4 inches which is actually longer than the 3-1/4 inch measurement...
    view full answer...
    Image 1 for
  • Dimensions Of Ultra-Fab Steel Roller
    We do not have the CAD drawings or blueprints for the Ultra-Fab Steel Roller, part # UF48-979020, but I have attached a photo of the roller with dimensions shown. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to the edge of the bracket.I also took a measurement from the center of the hitch pin hole to the bottom of the roller. The skid rollers do not have weight capacity listed because they are not designed to bear weight. They are intended to only protect...
    view full answer...
    Image 1 for
  • How To Determine Fit of the Roadmaster Rollaway
    The collar on your trailer hitch cannot exceed 3-1/4" wide nor can the distance from the center of the hitch pin hole to the end of the receiver tube be more or less than 2-5/16 to 2-7/16" in order for the Roadmaster Rollaway Trailer Hitch Protector part # RM-050 to work on your 2017 Toyota Tacoma. If your trailer hitch does not meet the above specs you can use the Ultra-Fab Steel Roller part # UF48-979020 instead because it has a much more universal design.
    view full answer...
  • Increasing Clearance on Rear of Chrysler Town and Country with Steep Driveway
    This is a fairly common issue with the Town and Country. However our suspension kits like # TDVRRT are not designed to work as a lift kit for the rear end of your truck. They are designed to help reduce the strain on your rear axle when you are carrying heavy loads, keep your vehicle level, and create a smoother ride by adjusting to the load size. If you have a hitch on the back of your vehicle you can use # UF48-979020 to take the brunt of the impact. One solution might be to approach...
    view full answer...
  • How Much Ground Clearance is Lost with the Adjustable Width Trailer Hitch Receiver 13703
    If you are referring to the lowest point then that would be the bottom of the frame bracket and if the horizontal section of this bracket was placed directly up against the bottom of the frame rail then it would stick down around 8" or so. However, if you are referring to the receiver tube opening then this will stick down around 5-1/2" assuming the horizontal section of the frame bracket is placed directly up against the bottom of the frame rail. I have attached a photo to help with this...
    view full answer...
    Image 1 for
  • Skid Wheel Needed for Coupler with Safety Chains Loops in the Way of Hitch Pin Mounted Wheel
    Since the location of your hitch pin hole and the safety chain tabs don't allow you to use a skid wheel like part # UF48-979020 or # RM-050, the only other option that may work is if you welded a skid wheel like part # UF48-979021 onto the bottom of your hitch receiver. The only issue with this is that if you have a fairly hefty vehicle it may not hold up very well as there is a note not to install it on a diesel pusher motorhome.
    view full answer...
    Image 1 for
  • Ground Clearances Of Class II and III Hitches for 2014 Honda Odyssey
    When we installed the Draw-Tite Class III # 75270 and the Curt Class III # C13068 on a 2014 Honda Odyssey, we found that the distance from the bottom of the receiver tube to the ground of both hitches is right at 10-1/2 inches. The Curt Class II you mentioned, part # C12031 offers slightly more clearance at 11-1/2 inches. Low ground clearance is kind of the nature of the beast with the Odyssey. Using a hitch mounted roller like part # UF48-979020 might be a good idea for you. The roller...
    view full answer...
  • How to Keep Extended Ball Mount from Scraping the Ground on Motorhome
    Unfortunately, we don't have a skid wheel that installs on the extended ball mount. I think your best option will be a skid wheel that connects to the end of the hitch receiver like # UF48-979020 or # RM-050.
    view full answer...
  • Roller to Prevent 2 Inch Receiver From Dragging On Pavement
    We've got exactly what you're needing. Take a look at the Roadmaster Rollaway Trailer Hitch Protector, part # RM-050. Use the included hitch pin to install into your receiver tube and you'll be protected from eating pavement at when backing out of driveways. It can be used with a hitch accessory in place. It will work perfectly with the Curt Class III # 13105 receiver hitch. I'll link you to a product description video featuring the Roadmaster Rollaway which shows how it fits on the receiver...
    view full answer...
  • Hitch on 23 Foot Motor Home Drags When Pulling Wells Cargo Trailer
    Since there is such a big gap from the rear axle to the end of the motor home there will be an increased chance the hitch will drag. You could use the Bulldog Cast Head Coupler, part # BDA2005C0317, but you would need to have it welded onto the A-frame of your Wells Cargo Trailer by a trailer professional or certified welder. This would then allow you to use a ball mount with less of a drop. As you may know, you will still want to make sure the trailer is being pulled as level as possible...
    view full answer...
  • Is the Ultra-Fab Steel Roller # UF48-979020 Compatible with a Hitch Receiver for a 2011 Sienna XLE
    Although the Curt # C13105 and # C13343 as well as the Draw-Tite # 76112 are confirmed fits for your 2011 Toyota Sienna XLE, they are not compatible with the Ultra-Fab Steel Roller # UF48-979020 due to the safety chain loops. Out of the trailer hitch receivers that you referenced I recommend installing the Curt Trailer Hitch Receiver # C13343 because it installs up and under your rear trim. The only part of it that is visible is the actual hitch receiver opening and safety chain loops....
    view full answer...
  • Available RV Skid Wheels for Frame and Hitch Mounting
    Skid wheels should not be mounted to an RV bumper, especially to one that was added as an aftermarket item. Skid wheels need to be mounted to the frame or to a hitch that is mounted to the frame. No RV bumper is rated for the kind of impact a skid wheel is intended to withstand. Your hitch mounted skid wheel like # UF48-979020 is your best bet.
    view full answer...
  • Class II or Class III for 2010 Subaru Legacy Ground Clearance
    Honestly, going with a 1-1/4 inch hitch is only going to gain you 3/4 of an inch of increased ground clearance which is pretty minimal, I'd recommend going with the more versatile Class III hitch. If you're concerned about the bottom of the hitch receiver hitting the pavement, you could use a skid wheel like # UF48-979020 which mounts to a 2 inch receiver, and will work whether or not you have an accessory mounted in the hitch. I'd recommend going with the Curt Class III hitch, part #...
    view full answer...
  • Will the Ultra-Fab Steel Roller, # UF48-979020 Fit a Curt Trailer Hitch on a 2011 Toyota Sienna
    The Ultra-Fab Steel Roller, # UF48-979020, is designed to fit Class III or higher hitches with a 2 inch receiver. However, in this case the safety chain loops on the Curt hitch for the 2011 Toyota Sienna will interfere with installation. I have tested the Roadmaster Rollaway, # RM-050, on a Curt hitch before and it is compatible. It also fits a Class III or higher hitch with a 2 inch receiver and has a 5/8 inch diameter hitch pin hole. You could use a bike rack with it.
    view full answer...
  • Is the Softride Locking Hitch Pin # SR25219 Compatible with the Ultra Fab Roller # UF48-979020
    I pulled both the Ultra-Fab Steel Roller # UF48-979020 and a Softride Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin # SR25219 from our warehouse to test to see if they were compatible and found that the fit is a little bit tight, but they will work with each other. Check out the video I attached that shows the two together.
    view full answer...
  • Can Ultra Fab Steel Roller be Used on 2 inch Hitch of 2019 Subaru Outback
    Yes, the Ultra-Fab Steel Roller # UF48-979020 that you referenced will fit the 2 inch hitch you have installed on your 2019 Subaru Outback. It will help with the dragging you are experiencing with the steep driveway as well.
    view full answer...


< Previous
12



Do you have a question about this RV Skid Wheel?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv skid wheels for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv skid wheel information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Halie H
Updated by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624