Replace the skylight and inner garnish on your RV or camper roof. 17-1/2" Wide x 25-1/2" long flange fits over a standard 14" wide x 22" long cutout. White polycarbonate plastic diffuses light. Includes sealant for installation.
Features:
Specs:
Note:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors and friends. Steven here with etrailer.com. Folks, today we're looking together at our Specialty Recreation low profile skylight with the included inner garnish and a tub of sealant. Now, this is gonna fit a 14-inch wide by 22-inch long cutout. Now before we get too much into the product, I want to go ahead and start with some dimensions. The skylight itself is gonna be 25 1/2 inches overall in length by 17 1/2 inches wide.
And the bubble height is approximately four inches tall. Now the garnish itself, this guy here, is gonna be 15 3/4 inches on a nice width and 23 3/4 inches long with an approximate bubble height of about four 1/4 inches tall. So now that we've got the dimensions outta the way. Also, wanna note that you're gonna require a minimum roof thickness of an inch and a half thick to install these. Now these are made of a nice durable polycarbonate construction.
They're UE resistant and also impact resistant. The translucent material is gonna diffuse light and reduce glare. So you can kind of see my hand behind there, but the farther away I get, it's a little harder to see. So that's gonna help diffuse light and everything. And you're gonna get one included tube of their SR 140 specialty sealant.
Now I wanna caution everybody, make sure you're using the included sealant. Don't try to use self-leveling sealant with these polycarbonate skylights, as the chemical make down, chemical breakdown rather, could cause failure on sealant and everything. So again, use their included sealant. Do not use anything else. Now, there's no screws included, but one nice thing they do, as you can see, they've given you all the pre-drilled holes for installation all around the edge there.
That's a nice touch, as most brands out there that I've found don't do that at all. So very nice touch by Specialty Recreation. Again, made here in the US. Nice one-year warranty. Folks, that is gonna wrap it up for our quick look at the Specialty Recreation low profile skylight. Again, this one included with the inner garnish and sealant for a 14 by 22 inch opening. I'm Steven, thanks for watching.
Average Customer Rating: 4.5 out of 5 stars (2 Customer Reviews)
Replace the skylight and inner garnish on your RV or camper roof. 17-1/2" Wide x 25-1/2" long flange fits over a standard 14" wide x 22" long cutout. White polycarbonate plastic diffuses light. Includes sealant for installation.While the parts covered the opening in the roof, additional work was needed to make the material you sent fit and seal.
Do you have a question about this RV Skylight?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.