bing tracking image
  1. RV Steps
  2. Kwikee
  3. Motorhome
  4. Electric Step
  5. 1 Step
  6. 24 Inch Wide Step
Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 35 Series - 24" Wide
Kwikee

Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 35 Series - 24" Wide

Part Number: LC3691462
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$723.49
Retail:$931.95
You Save: $208.46
RV Steps
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replaces the electric step, motor, and switch kit for your Kwikee 35 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power. Great Prices for the best rv steps from Kwikee. Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 35 Series - 24" Wide part number LC3691462 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Videos (2)
  • Photos

Kwikee RV Steps - LC3691462

  • Motorhome
  • Electric Step
  • 1 Step
  • 24 Inch Wide Step
  • Kwikee
  • 25-1/2 Inch Wide
  • 5 Inch Drop/Rise
  • Steel
  • No Ground Contact

Replaces the electric step, motor, and switch kit for your Kwikee 35 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.


Features:

  • Replaces the step, motor, and switch kit for your Kwikee 35 series steps
    • Control unit (LC379146) for automatic extension sold separately
  • Motor works with gearbox to extend and retract the step
  • Switch kit wires to the step and mounts inside your RV for manual operation
  • Integrated safety feature automatically retracts the step if it strikes an obstacle during extension
  • Non-slip tread and easy-to-see reflective strips on step surface
  • Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
    • Solid steel drive rods and stainless steel bushings provide additional durability
    • Air pressed rivets at pivot points ensure long-term strength
  • Simple installation with existing mounting holes and wiring harness
    • Hardware sold separately
  • Made in the USA


Specs:

  • Extended height: 5-7/8"
    • Folded height: 5-3/4"
  • Overall width: 25-5/8"
  • Mounting plate dimensions: 23-3/4" wide x 11-3/8" deep
  • Bolt pattern: 22" wide x 8" deep
  • Step dimensions: 24" wide x 11-1/8" deep
  • Drop/Rise: 4-3/8"
  • Voltage: 12V
  • Weight capacity: 300 lbs
  • 1-Year warranty


Note: This step assembly includes the steps, motor, and switch kit only. The steps will operate manually through the switch kit.


If you want the complete step assembly that allows the steps to automatically extend and retract with the RV door, you will need a control unit. The switch kit included with this assembly will still work, but if you want to be able to override the automatic retraction, so the steps stay out whether the door is open or closed, you will need a different switch kit. The complete assembly with steps, motor, control unit, and switch kit is available under part number LC3691461.


The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should having this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.


Safety Features

The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.


Will Kwikee Electric Steps Work for You?

Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


Kwikee In and Out

The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 25-5/8" wide and 11-3/8" deep.


If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.


Outriggers for RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.


Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

Kwikee Entry Height

To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.


The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.


This page's step assembly is in bold text.


Mounting Bracket WidthEntry HeightPart Number (Complete Assembly)Part Number (Replacement Assembly)
24-3/4"15-5/8" - 17-5/8"LC3747453LC3747452*, LC3747451**
25"16-3/4" - 18-3/4"LC3724742n/a
25-1/2"27-7/8" - 29-7/8"LC3658373LC369552*, LC365837*
25-1/2"20-1/8" - 22-1/8"LC372261LC3722615*, LC3722617**, LC3722616***
25-1/2"20-1/2" - 22-1/2"n/aLC3725791*
25-1/2"12-1/8" - 14-1/8"LC3723383LC372338**
25-1/4"13" - 15"LC3711363LC371136*, LC3711361**
25-3/4"22-7/8" - 24-7/8"n/aLC372558*
25-5/8"11-7/8" - 13-7/8"LC3691461LC369146*, LC3691462**
25-5/8"13" - 15"n/aLC3726041*
25-7/8"23-1/4" - 25-1/4"LC3726892LC3726891**
26-5/16"27-1/4" - 29-1/4"LC3694042n/a
29-3/8"18" - 20"LC3722661LC372266*, LC3722662**
30-1/4"15-1/4" - 17-1/4"n/aLC372779*
30-3/8"17-1/4" - 19-1/4"n/aLC427247*
30-5/8"20-1/2" - 22-1/2"n/aLC375632*
31-1/2"28-5/8" - 30-5/8"n/aLC375821*
31-1/2"12-3/8" - 14-3/8"LC3756271LC3756272**
32-3/8"20-1/4" - 22-1/4"LC3722862LC3722863**
37-1/4"18" - 20"n/aLC3694112*, LC369411***

*Motor and control unit

**Motor and switch kit

***Motor only



How Do You Install the Steps?

To install the steps:

  1. Hook up the steps to power to verify that all components are in working order
  2. Make sure the camper is level on flat ground
  3. Lift the steps into the mounting space and prop into place
  4. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  5. If needed, install the outriggers
  6. Align step mounting holes and secure in place with carriage bots and flange lock nuts

    -Make sure bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  7. Tighten hardware until snug
  8. Make sure assembly is sitting square and level
  9. Torque the hardware tight
  10. Connect the appropriate writing to your vehicle's source


3691462 Lippert Components (LCI) Quickie 35 Series Motorized Motorhome Entry Step - 1 Stair - 5" Drop/Rise - 24" Wide - 300 lbs

Kwikee Part Number 903500906





Video of Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 35 Series - 24" Wide

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for FAQ Trailer Step Measuring

Hey guys, this is Jake here with etrailer. Today, we're gonna go over some details and the measurements that you're gonna need to take if you're wanting to replace your fifth wheel or your travel trailer steps. If you're looking to replace your motor home or your RV steps, we're gonna have a separate video made just for that. Now, a couple of reasons why you might want to replace your steps. One of the biggest reasons is because people don't like these pull out steps because they're uncomfortable and makes for a not pleasant experience on the inside of the camper if they're folded out because they hover above the ground. When somebody steps on 'em, it rocks the whole camper.

So that might be a reason why you wanna upgrade from the pullout style steps to the fold out style which will fold up into the door of your camper. The nice part about the fold out is that they're going to be rested on the ground, so all the weight from the person walking into the camper is gonna be pushing on the ground and not pulling on the side of the camper. With that being said, a lot of people like this style because it's not gonna take up space on the inside of your door. So regardless of which kind you would like to go with, there's gonna be different measurements for each. There's gonna be a measurement for the pullout style if you wanna replace just the steps you have outside already.

And then there's gonna be different measurements for the fold up style, to be able to measure, you know, you're gonna have to measure from the ground to the inside and then side to side in the door. So, it's gonna be different because they're gonna be located in a different spot. Now, here we have a different set of pull down camper steps. The reason why I switched from my camper to these is because my camper, the bracket's actually welded in. If that's the case, you're just gonna have to cut it out.

But the reason we're showing you here is because these are bolted on and I'll be able to give you the proper measurements to replace 'em. So, first measurement you need to take is from this bracket, the bracket that's actually attached to your camper, not the step bracket, from the inside to the inside of these two brackets, which for us here is gonna be 27.5. And then what you need to do is you need to measure the depth of this bracket. So from this outer edge here to the trailer frame. Good for that.

We get about 13 and 3/8. And then the last measurement is from the ground. Now you wanna make sure you're on level ground and your camper is level from the ground to this bolt right here on the outside. So that. we're getting about 26 and 1/4. Now, if you're looking to upgrade to a set of fold-down steps that actually store inside of your camper, the two measurements that you need to take is from inside flange to inside flange, not the inside of the actual door frame, because it's gonna need to fit in between these flanges. So for us measure right up against there and we get about 24.5. You can see there. The other measurement we need to take is from the ground, again, being on level ground from the ground to the top inside of the threshold itself. So for us, it's going to be about 35. And the last thing that you need to do is you need to match up the measurements that you've taken, whether you're replacing your steps that came on your camper or you're replacing them and upgrading to the fold up type. You just need to match up those measurements to the measurements on our product page for the steps that you're looking for. Well, guys, hopefully this information was helpful in helping you to find the right information and the right measurements you need to replace your camper steps. If you have any questions, please leave 'em in comments below and we'll see you next time..


Customer Reviews

Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 35 Series - 24" Wide - LC3691462

Average Customer Rating:  5.0 out of 5 stars   (6 Customer Reviews)

Replaces the electric step, motor, and switch kit for your Kwikee 35 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.

by:

our step works perfectly. And thank you to the customer support team. Good work guys!



by:

The wife is happy, she has a working entry door step.

etrailer.com provided great customer service, all my questions were answered.

I highly recommend etrailer.com !!!



by:

My order was processed quickly and accurately. The steps I ordered were easy to install and works great. Etrailer is highly recommended.



by:

Etrailer was and has been super easy to deal with, great pricing and really good customer service.



by:

I will be installing your product (step) next week.

You service was outstanding, free shipping and next day deliver is seldom found these days. Your sales associate (MOLLY) was outstanding, very polite, helpful and very knowledgeable about the step I needed. In fact, I called looking for information ONLY and her helpfulness/knowledge was the reason I changed my mind and immediately placed my order.



by:

Step arrived on time. It was installed quickly. It works great.


6
6

See what our Experts say about this Kwikee RV Steps

  • Comparing Lippert 35 Series Electric RV Step Units
    The four Lippert 35 Series RV electric step items are essentially the same product but they differ in some of the included components. In certain cases the original electronic control unit on the RV unit may still be functional and only the step and motor are needed. Part # LC3691462 includes the step, motor and switch kit. Part # LC369146 includes the step, motor and control unit. Part # LC3756271 includes the step, motor and switch kit. Part # LC3691461 includes the step, motor, control...
    view full answer...
  • Replacement Kwikee Step for 2004 Monaco Dynasty
    The replacement step you need for your 2004 Monaco Dynasty is the Lippert Components Kwikee 35 Series Single Electric Step # LC3691462 based on the number you gave. Let me know if you have any further questions.
    view full answer...

Do you have a question about this RV Step?


Info for this part was:

Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Updated by:
Kathleen M
Employee Brian T
Updated by:
Brian T
Employee Hannah L
Updated by:
Hannah L
Employee Halie H
Updated by:
Halie H
Employee Noah M
Updated by:
Noah M
Employee Cody B
Updated by:
Cody B
Employee Dustin K
Video Edited:
Dustin K
Employee Chelsea B
Written by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924