Electric step assembly includes everything you need to automatically open and close the steps with your RV door. Motor and control unit extend and retract steps. Switch kit overrides step retraction. Amber light illuminates when steps extend.
Features:
Specs:
Note: This step assembly includes everything you need to install and use the steps on your RV.
The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should have this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.
The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.
Will Kwikee Electric Steps Work for You?
Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 26-5/16" wide and 10-1/2" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
Mounting Bracket Width | Entry Height | Part Number (Complete Assembly) | Part Number (Replacement Assembly) |
---|---|---|---|
24-3/4" | 15-5/8" - 17-5/8" | LC3747453 | LC3747452*, LC3747451** |
25" | 16-3/4" - 18-3/4" | LC3724742 | n/a |
25-1/2" | 27-7/8" - 29-7/8" | LC3658373 | LC369552*, LC365837* |
25-1/2" | 20-1/8" - 22-1/8" | LC372261 | LC3722615*, LC3722617**, LC3722616*** |
25-1/2" | 20-1/2" - 22-1/2" | n/a | LC3725791* |
25-1/2" | 12-1/8" - 14-1/8" | LC3723383 | LC372338** |
25-1/4" | 13" - 15" | LC3711363 | LC371136*, LC3711361** |
25-3/4" | 22-7/8" - 24-7/8" | n/a | LC372558* |
25-5/8" | 11-7/8" - 13-7/8" | LC3691461 | LC369146*, LC3691462** |
25-5/8" | 13" - 15" | n/a | LC3726041* |
25-7/8" | 23-1/4" - 25-1/4" | LC3726892 | LC3726891** |
26-5/16" | 27-1/4" - 29-1/4" | LC3694042 | n/a |
29-3/8" | 18" - 20" | LC3722661 | LC372266*, LC3722662** |
30-1/4" | 15-1/4" - 17-1/4" | n/a | LC372779* |
30-3/8" | 17-1/4" - 19-1/4" | n/a | LC427247* |
30-5/8" | 20-1/2" - 22-1/2" | n/a | LC375632* |
31-1/2" | 28-5/8" - 30-5/8" | n/a | LC375821* |
31-1/2" | 12-3/8" - 14-3/8" | LC3756271 | LC3756272** |
32-3/8" | 20-1/4" - 22-1/4" | LC3722862 | LC3722863** |
37-1/4" | 18" - 20" | n/a | LC3694112*, LC369411*** |
*Motor and control unit
**Motor and switch kit
***Motor only
How Do You Install the Steps?
To install the steps:
-Set aside steps before drilling
-Make sure bracket is backed up fully against the I-beam on the chassis
-Hardware not included
Average Customer Rating: 4.5 out of 5 stars (2 Customer Reviews)
Electric step assembly includes everything you need to automatically open and close the steps with your RV door. Motor and control unit extend and retract steps. Switch kit overrides step retraction. Amber light illuminates when steps extend.Product, Shipping, condition and all handling aspects were very good. The mounting holes had to be re-drilled to match old step. Will recommend and use service again if needed.
Do you have a question about this RV Step?
Condition: Badly Dinged
Notes: Item has cosmetic dings/scratches present.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.