Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the electric step, motor, and switch kit for your Kwikee 28 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.
Features:
Specs:
Note: This step assembly includes the steps, motor, and switch kit only. The steps will operate manually through the switch kit.
If you want the complete step assembly that allows the steps to automatically extend and retract with the RV door, you will need a control unit. The switch kit included with this assembly will still work, but if you want to be able to override the automatic retraction, so the steps stay out whether the door is open or closed, you will need a different switch kit. The complete assembly with steps, motor, control unit, and switch kit is available under part number LC3747453.
The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should have this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.
The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.
Will Kwikee Electric Steps Work for You?
Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 24-3/4" wide and 8-5/8" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
Mounting Bracket Width | Entry Height | Part Number (Complete Assembly) | Part Number (Replacement Assembly) |
---|---|---|---|
24-3/4" | 15-5/8" - 17-5/8" | LC3747453 | LC3747452*, LC3747451** |
25" | 16-3/4" - 18-3/4" | LC3724742 | n/a |
25-1/2" | 27-7/8" - 29-7/8" | LC3658373 | LC369552*, LC365837* |
25-1/2" | 20-1/8" - 22-1/8" | LC372261 | LC3722615*, LC3722617**, LC3722616*** |
25-1/2" | 20-1/2" - 22-1/2" | n/a | LC3725791* |
25-1/2" | 12-1/8" - 14-1/8" | LC3723383 | LC372338** |
25-1/4" | 13" - 15" | LC3711363 | LC371136*, LC3711361** |
25-3/4" | 22-7/8" - 24-7/8" | n/a | LC372558* |
25-5/8" | 11-7/8" - 13-7/8" | LC3691461 | LC369146*, LC3691462** |
25-5/8" | 13" - 15" | n/a | LC3726041* |
25-7/8" | 23-1/4" - 25-1/4" | LC3726892 | LC3726891** |
26-5/16" | 27-1/4" - 29-1/4" | LC3694042 | n/a |
29-3/8" | 18" - 20" | LC3722661 | LC372266*, LC3722662** |
30-1/4" | 15-1/4" - 17-1/4" | n/a | LC372779* |
30-3/8" | 17-1/4" - 19-1/4" | n/a | LC427247* |
30-5/8" | 20-1/2" - 22-1/2" | n/a | LC375632* |
31-1/2" | 28-5/8" - 30-5/8" | n/a | LC375821* |
31-1/2" | 12-3/8" - 14-3/8" | LC3756271 | LC3756272** |
32-3/8" | 20-1/4" - 22-1/4" | LC3722862 | LC3722863** |
37-1/4" | 18" - 20" | n/a | LC3694112*, LC369411*** |
*Motor and control unit
**Motor and switch kit
***Motor only
How Do You Install the Steps?
To install the steps:
-Set aside steps before drilling
-Make sure bracket is backed up fully against the I-beam on the chassis
-Hardware not included
Average Customer Rating: 4.7 out of 5 stars (177 Customer Reviews)
Replaces the electric step, motor, and switch kit for your Kwikee 28 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.Upon opening the box, I bench tested the 28 series steps and they worked perfectly. Once the older steps were removed, the installation went easily. I used a floor jack to lift and hold the 28 series steps in place thus allowing me to Mount them alone.
The steps itself work great as far as the delivery when I received them the box was torn and part of the frame was bent.Iwad able to straighten it what I would recommend is better packaging or a different carrier.
The part sent was incorrect, so here we go in other week with an ambulance down. I’ll recap they sent the incorrect step we used it anyway because we wanted something to assist people to enter the ambulance, the switch with the unit they sent was defective it took a half hour on the phone from the service person to understand that, they sent the wrong switch so I spent a half an hour on hold then spoke with the person for 20 minutes, they were supposed to get back to me letting me know they figured out the correct switch and they have not. We’ll see what tomorrow brings?
Because of a unique application, my installation was significantly more involved than standard.E- trailers assistance in resolving the issues was very helpful and professional. Thank you. Darrel
I think I was misled by the vedio I was expecting a automatic switch and amber step lite like in vedio
Jenny N.
3/14/2022
To add the automatic open and close feature when the doors open on the RV you would need part # LC379146. For the light kit to be added you would need # LC379414.
The steps were easy to install. They fit perfect. Holes for bolts ligned up perfect. They still work after a year. Would recommend to anyone. ThankYou, etrailer
Etrailer.com is top shelf. Great products and outstanding service. Their webpage is user friendly. Do Not hesitate to do business with these people. I have conducted several orders with them with 105% satisfaction.
Great step .... motor seems to run now but step will not come out..
Need some advise on this problem
I am so glad I came across etrailer.com, They have what I need in stock, and show you how to use and or install the product.
They have great prices and fast shipping, What else could you ask for!
Sherry S.
8/7/2023
Product still works perfect. It’s also a lot quieter than the one we replaced.
It works exactly like the original
Everything is great! Except.. the paint was flaking off on the edges. It seems if it was powder coated this wouldn’t have. At least I haven’t seen it before. Other than that.
I needed quick delivery. The product arrived on schedule just as promised. The web site gave good descriptions of the products so I was able to quickly find the right part. It was an exact match for the damaged part. I was very relieved to have it installed so we can now leave on time for our next trip.
I was told 2 to 3 day shipping I ordered it on Friday it sat in their warehouse on Friday night all day Saturday all day Sunday final shipped on Monday received on Wednesday had to leave for vacation on Wednesday morning so no working step on motorhome. Very disappointed with shipping service. Other then that they send great instruction videos
Our step was installed on our fully restored 1945 Flxible Clipper bus. Installation was not difficult at all, and it works perfectly.
Thank you for selling a great product at a great price, and very quick shipping.
GEAT PRODUCT HAVE INSTALLED THIS ON SEVERAL COACHES FOR REPLACEMENT, WOULD HIGHLY RECOMMEND EASY INSTALL, FAST SHIPPING
Step came quickly. Installation was easier than expected. With the help of a floor jack the job was complete in about 30 minutes.
Awesome step ! No more stool to fall off of !
etrailer shipped the step out fast !
Me and my wife just love it !
Thanks guy and gals at etrailer !
You have a customer for life !
Bolted and Plugged right in on my 2001 Winnebago Spirit Motor home. No modification. Old step was a Kwikee 28 Series Single Step. Works just like new.
Do you have a question about this RV Step?
Condition: Surface Scratches
Notes: Item has cosmetic scratches.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/27/2022
I will have our Customer Service team reach out to you.