MORryde RV TV Wall Mount - Extend/Swivel/Tilt - 50 lb Capacity - Steel

Video Transcript for Feature Breakdown: MORryde RV TV Wall Mount

Hello, neighbor, Steve here with etrailer.com. Today, we're looking at our MORryde RV TV Wall Mount that can extend, swivel, and tilt, and is capable of holding a 50-pound max TV. So, folks, with this mount, you can secure your RV's flat screen TV to the wall, or even a basement, cargo compartment door, exterior, whatever you really want. It's got a full-motion mounting plate that lets you adjust your TV's viewing angle. It can extend out to a full 17 inch, like so. And you simply have a locking tab here when it's closed, where you would just pull on the cable to release it.

So I'm gonna fold it all the way back up here. Let me zoom back out, show you the best way. Now, keep in mind, there's obviously no TV on this right now, so it's probably not gonna be the easiest to bend. And with that part flat, and then it would sit pretty much flat like that. Let's zoom back in, give you a better view.

Keep in mind, this is loose because I don't have anything tightened, just wanna show you for reference. And, again, that pull chain, that tab, when you pull that chain up, it's gonna release the locking mechanism to then allow you to tilt the TV out away from the wall all the way. And then, again, even from there, you can tilt again, and you could even tilt this part here up or down accordingly. So I'm gonna leave it kind of like this, just so I can get it to stand back up for us here for demonstration purposes hopefully. There we go.

Now it does swivel 350 degrees, not 360, 350, to accommodate those awkward furniture configurations. You can extend it as far out as 17 inches to make it easier to see that screen. And you can tilt up or down eight degrees either direction to help remove the glare. Now the locking pin that I showed you with the chain here, that's gonna prevent the mount from moving around on its own, especially while you're traveling to your campsites or wherever you're going. The whole thing is made of a nice, durable steel, and it's been black powder coated to resist rust and corrosion.

It is a simple bolt-on application, you've got all your VESA mount patterns that are available here. I'll put them on the screen. You've got mounting hardware here with all the washers, and the different VESA mount screws. And the VESA mount is gonna be whichever hole size matches your TV, but you wanna make sure your TV has one of these four options for the VESA pattern, otherwise, this probably won't work for you. It's got a nice one-year limited warranty. Again, a max capacity of a 50-pound television. Now, as far as some dimensions, when it's fully extended away from the wall, it can go 17 inches, like I mentioned. When it's fully retracted, it's only about 2 5/8 inches deep. Now as far as the base mount plate dimensions, this back part here, let's go ahead and close this up. Lock it back in, there we go. So this whole panel here, this base mount, is nine inches tall by 6 1/2 inches wide. Well, folks, that's gonna wrap it up for our look at this MORryde RV TV Wall Mount. I'm Steven, thanks for watching.